24g In Sub Tank Mini Rad?

Hey guys whats up. Well I had gotten the Sub Mini tank, the first tank I got was a dud. I had nothing but issues with it since day one. Coils went bad in 1.5 days both coils, then the rba deck was giving my sigeili issues and errors.

So I sent it back, They replaced it, and I now have Version 2 as they say. This tank has 2 air slots and different Holes in the tank. I used the Stock .5 coil but was just getting wayyyy too many dry hits.. So I went to the RBA deck, been using the coil that came with it, and I have 100% organic cotton. So I been using that, but now I am getting Dry hits with this thing!!! every 4th hit Is Dry!! I have to cover the holes and pull to get teh cotton wet again, and then 4th hit shes dry again.

What is going on here? Anyone else have issues like this? I am really getting fed up with this and ready to just throw it away. What can I do about the situation or why is this happening?

E-juice = 80/20 Clear Liquid all fruity flavors 3MG  

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

I'm new to vaping and I hope I'm not beating a dead horse but couldn't find it searching. I have a Nautilus on order and a istick 50w. I've thought about trying a subtank mini too. I'm not looking to sub ohm or rebuild, just a good tank with good flavor. How do they compare with the mini using the 1.2 ohm coil.

Thanks for your time!
Chris  

Hello vapers! first! I'm a noob at this stuff because I just buy my tank and use it with the coils it comes with and second, my english isnt that good but I can understand it perfectly fine.

Anyway, Ive been searching everywhere but I couldnt find a solid answer to my question.
Im using an Aerotank Giant right now with a 1.8 ohm coil, if I put a 1.2 ohm I would have to use less voltage because I get a burnt taste and the coil burns pretty quick, Im about to order a Sub ohm tank soon and I'll use the stock coils, the one im getting is the Kangertech SubOhm tank.
Why do subohm coils use more voltage when normal coils use less?

I mean, Ive seen people do things like 0.2 ohm coil @ 100W + If I did anything over 3.5V on my 1.2 ohm coil itd burn instantly... SubOhm takes more voltage the lower you go and normal dual coils take less voltage the lower you go!

1.9 Ohm Dual coil = 3.7-3.8V for me
0.5 ohm OOC subtank sub ohm coil = 12-30W?!

Thanks in advance for taking the time to reply to this post and your patience!

Cheers!

Edit: by the way, Im planning to use my subtank with a 50/50 PG/VG 16mg nicotine, Is that ok?  

So I finally got around to putting a coil on the rba deck...my typical kayfun build, 28 ga @ 1.3-1.4 ohms. Everything looked good, coil tight....raised off the deck...screwed into the ohm meter....weirdness ensues....said 3.85 ohms...took it off, put it back on...said 4.6 ohms....looked to see if the coil screws were tight ...check. both tails tight under the screws...check. The coil deck screwed into the base...yep. No moisture in the base, nope. Put it on the ipv...said 7.7 ohms, then 4.2, then 3.90.............


Put the stock coils in the base, everything normal. Is there something I could be missing in the coil deck??? I got nothing else. No, I had not put the chimney on, so no short there. I may wrap another coil and see....I can only think that something is amiss in that little coil deck....or I am missing something in the build that is obvious. It's a really nice, tight looking coil too.  

My main go-to setups these days are Nautilus tanks (both sizes) with 1.8ohm BVC's on mini boxes like Eleaf iStick and Heatvape Defender, but since I got the Defender and it can go down to 0.5ohm with it's 25 watts I decided to give it a go.

So I recently purchased a 22mm Peakomizer 2 Mega tank with Aspire Atlantis 0.5ohm coil and just recently tried it out around 25 watts with my favorite 70/30 vanilla flavor juice.

Now maybe this is partly to do with the tank I bought but even on the tightest airflow setting I feel like it's just too much. It seems to kind of force me to do deep straight-to-lung hits and I'm just not into the experience. I like mouth-to-lung hits focused on flavor more than anything else and I don't typically inhale too deep, for more of a smooth creamy vape. But this experience was more like harsher throaty big airy inhale and I didn't dig it.

After literally just 30 minutes of checking it out I went right back to my Nautty's with 1.8 ohm BVC's between 7.5 to 10 watts and that's a happy place for me, so I'm probably going to sell the barely touched Peakomizer 2 tank and brand new Atlantis .5 coils (looking forward to getting access to Classifieds section here soon).

But still I'm interested in other vaper's thoughts on this. I'm curious to know if sub-ohming is mainly geared toward heavy lung hits and the airy experience I had or if there are ways to do it / certain gear to use so that it's a similar experience to what I'm used to.

As always, I'm just really curious to read the opinions and experiences of others. It helps me learn something new every day!  

What is your go to single coil build in terms of gauge wire, diameter, and number of wraps : (no fancy Clapton or twisted build just a "regular" wrap)

And if you have a reason please include it: For example: "I'm a flavor junkie and this is best flavor build I've found" or "I like short ramp up times" etc ...

(I know preferences may vary greatly)

Thank you very much

:


Sent from my iPad using Tapatalk  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

It seems like the only rta coil builds that don't give me dry hits are standard spaced coils. Every time I try to do the coils that touch I get dry hits. Why is this? And why do people press the coil together in the first place? faster ramp up time? Frustrating!!!!  

Hello, so i have been vaping with this new Aegis mini kit with a cerberus tank that i bought a couple of weeks ago. I have used up the 2 standard coils that were in the box, but for some reason in my country i am not able to find specific coils for aegis mini kits online (I live in Belgium). My question is if there are any other (more available) coils that i could use in my cerberus tank? I don't want to pay like $30 just to have them shipped from the UK to Belgium to be honest as they should be aroun $16 for a 5-pack. I noticed i could get "Geekvape Cerberus coils", would these fit my cerberus tank? Maybe a dumb question but you can't be sure enough.

Thank you in advance!