Copper, Bronze, Brass Variable Wattage Mod.

I was just wondering if anyone has had any luck clear coating their brass and copper mods with spar urethane.

I was going to try a polyurethane clear coat but I've seen too many mods that would still patina beneath the clear coat. I don't want that happening to any of my mods. Today I picked up a can of Miniwax Helmsman Spar Urethane and so far I have only coated the top cap and the exterior of the firing button on my 4Nine mod. I figured I would test it on this mod first since it's my least liked mod. It's still to soon to tell if it's going to patina beneath the coating.

If anyone has experience on clear coating mods pls let me know what products work the best.  

Hi.....looking at getting the vamo V6 20w VV/VW . What do you guys think?

Vamo V5 Variable voltage/variable wattage personal vaporizer  

I'm soon to b purchasing a eleaf istick 50w variable voltage/wattage mod box. Trying to figure out best to use prior to it's arrival.Plz and thank u....and also ,I assume the instructions will come with,but I've read something about prepping the subtank..help plz?  

I'm finding a 1.3 ohm coil to be to low for me. On my Provari, between 2.9 and 3.5 volts are OK. I haven't used this tank on either of my other two variable wattage regs, but I'd think it to be in the 6 - 7 watt range. It's time to re-wick the other tank or quit typing and do it already. I think I'd go for the former, but then I'd have to think about that. The other tank's coil I wrapped to about 1.7 ohms. My mech and me would be ever so gladder if that tank was fully operational again.  

I have a battery that is capable of going up to 6.0 V but the chart that came with the battery did not have 1.6 Ohm listed on the chart, it skipped from 1.5 Ohm to 1.8 Ohm.
I just need to know what the max amount of volts that I can use with this coil without reducing it's life expectancy to much.

- Also is there any reason to prefer variable wattage mode over variable voltage? because I always use V/V mode never even tried V/W.  

Anyone else had a negative experience?
I ordered a Mutant copper mod...
Mutant Copper Mod

This is what I ordered:


This is what I got:




I have been trying to contact them for two days, via their website, FB, and email...
It's like some guy just dropped his old mod in the box and...I dunno, tough luck?  

I recently bought the Forge v2 by MCV Philippines and really love it. It's the copper version and looks great on my Kingpin. I also bought the MCV Philippines Elite drip tip to go on it. It's actually 2 tips in one(a copper and brass that can be stacked). Anyway, it won't fit on my Forge 2 because the post screws are too tall. The tip is a wide bore, and the 510 adapter that came with the RDA is shorter and doesn't make contact with the screws.

When I take the PH screws out, the Elite drip tip fits fine. I figured I would just add some of my extra Allen Hex grub screws(which I put on all my RDAs if possible), but the screws in the MCV Philippines RDAs are one size smaller than most RDA post screws. I believe they are size 3 (#46 / 3-56). I'm guessing they are Fine coarse.

Does anyone know a site that sells screws like this? I've tried searching Google, but didn't really find anything relevant.


Thanks  

Hey everybody, has anyone here ever ordered stuff from Vaping Tech? I have never tried them so I gave them a shot by ordering a copper FU Apollo mech last night since I couldn't find one with the black writing instead of the brass(?) writing in stock anywhere else. If you have any experience with them please let me know!  

Don’t you feel low wattage pod system flavour is weak as compare to tank/pod-mod high wattage Vape flavour  

im looking for a new mod budget (50ish dollars) would this $47.37 ATHENA Smart-60PB VW Variable Wattage APV Box Mod - 5-60W / 1*26650 / aluminum / black at FastTech - Worldwide Free Shipping be good, and do i need to get any batteries for that i currently have 2x of 18650 batteries