Cleaning Nickel Wire (ni200) Builds?

Which of these are going to be the best for a tc unit?

Nichrome
tempered ni200
annealed ni200

This most likely has already been asked but I don't know anything when it comes to nickel wire.

Thanks  

I recently got an ipv4 and wasn't getting good results as I had never worked w/ nickel wire BEFORE.While trolling the web I ran across a suggestion on twisting 28g kanthal w/ 28g nickel. It made all the Difference.Does any one have any advice on getting the most from t.c. devices ?  

VapingwithTwisted420 is using Spider Silk titanium wire for his temp controlled reviews.

I have an allergy to Nickel and have been using TI wire on my IPV4. Definitely something to consider.

[Moderated]  

Hey guys just recently got a Lemo2, wasn't happy with the coil that it came built with for some reason so built my first one to put in. I think it came out pretty good, I believe it came with 24g Kanthal and I did 11 wraps around 3.5mm came out to 0.9ohm. It takes a while to ramp up but seems to give a nicer vape to me than the stock one which was like 5 wraps around 2mm at 0.5 ohm.

Anyways, I tossed the original coil and now am wondering if I really had to or could have saved it. When you guys try new coil builds do you save your older builds? And being that it's really just resistance wire does a coil ever really need to be replaced or is it just for novelty/trying new builds?  

Hey all, I was just wondering, I've seen a few people talk about using A1 kanthal? Im not too sure what im using, but i know its 24guage kanthal. If im just making .2-.8 ohm builds, on a stingray x and I also have a voltage regulated box mod. whats the safest/best wire to use?  

This mod company claims temp control with any kind of wire ! I don't know about the rest of you but i think this would be pretty awesome if it works, what do you guys and gals think? Also it seems to monitor juice level and will flash a reminder to refill juice.




Asolo Specification:

1. The mod can support almost all tanks from 0.08ohm~2.5ohm.

Remarks:
It can support 0.05ohm but we are not recommend you to do it because it may be dangerous.
2. It is various device from 5w~200w
3. Heating coil material: KANTHAL A1, Titanium (Ti), Nickel (Ni200), other normal materials for wire

Asolo 200W_Shenzhen IJOY Technology Co.，Ltd. - Ijoy e-cigarette/Most electronic cigarette manufacturer innovation  

When calculating builds on Steam Engine for parallel builds, is the wrap count the total of wraps counting each strand, or total wraps for the unit of strands?

Example: I want build X using 2 parallel strands of 28g Kanthal, and for my given resistance, SE says use 14 wraps. Is that 7 wraps with parallel wires, or 14 wraps counting the parallel wires as a single wire?

Thanks in advance, guys. I'm trying to experiment with some creative builds and I want to waste as little wire as I can on missed resistance.  

So I'm looking into buying a temp controlled mod for my next purchase. Ideally, I would be getting the VaporFlask with the DNA40 board. Problem is, I dont have $300 usd to drop on it. Sooo....

I was thinking about the FT clone, and was about 3 clicks away from making the purchase when a friend tells me about the IPV4 pre-order over on the bay. The DNA40 has temp control and goes up to 40 watts (duh) but from what I have read, the IPV4 also has temp control and goes up to 100 watts. I'll never use all 100 watts BUT sometimes will vape above 40 watts. I like that both are dual 18650 and have the temp control function (I'm dying to play with some nickel wire) I'd really like some opinions

Any thoughts on the VaporFlask clones from FT? Would it be worth it for me to wait for the IPV4?

Cheers ECF!  

I'm about to venture into doing my own builds and I had a silly question. I have watched dozens of videos on how to do builds and have even done a couple builds on some of my friends attys. I have one friend who on all his dual builds he uses two coils with different wraps. For example one coil with 7 wraps and one with 5. Does anyone else build this way? I have never asked him why he does this and in all the videos I've watched I've never seen anyone else do it. Is there a specific reason? Just curious  

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks