Gluing Glass To Metal. First Gen Kanger Protank.

So I"m thinking about getting a MELO tank so that i can have something for driving and being out and about. I have 2 big questions. 1) It says that the wicking material in the pre- built coils is something called 'glass fiber cotton"......what on earth is that? Surely to goodness they aren't using actual fiberglass but does this stuff actually contain glass? 2). It looks like a very well made piece. Does anyone know if it is 100% stainless steel (especially the chimney assembly and the coil) or is it that plated brass that will flake?  

So I just bought a new Nautilus 2S. I looked at YouTube videos beforehand and I saw that it has a leak proof system. But when I unscrewed the bottom to make sure that I have the right coil pre-installed, the entire bottom came out, similar to the Nautilus 2. Is all versions of the Nautilus 2S with this locking system or some don't have it? I tried hard to unscrew the very bottom but instead it came out like the 2 so I took off the glass and changed the coil, put the glass back, filled from the top and started vaping. Did I do something wrong?  

i just noticed there is like a gash on the glass part of my tank i was just wondering if i could do to fix it instead of having to go out and buy another one (so it won't leak)? like tape or w/e

it is on the outside and is not leaking ATM  

I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.  

Hi! so i broke my tank glass and i need to replace it asap,the thing is the exact same glass for this tank is hard to find, is there any other compatible glasses for this tank?  

Been using my Taifuns GT RTAs again. Love 'em, but I hate the frosted glass.

Anyone here ever been successful in removing the frosting from frosted glass?  

Hi,

I just bought a litre of 100mg/ml unflavoured PG E juice.

I calculated that if it doesn't go off it should last me 10 years. It came in a sealed plastic bottle.

I bought a dark amber glass bottle (which I have sterilized) to put it in but I was wondering if it would be better to leave it in the original sealed plastic bottle rather than breaking the seal to put it in the glass bottle? I took the lid off and it has a proper seal over the rim of the bottle like a Gatorade.

Also the glass bottle I bought came with a plastic lid but I doubt it will be 100% airtight.

Thanks for your advice, any other tips would be much appreciated.  

Hi,

I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.

I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.

I am not interested in a big old MOD or anything. I like the pen-like style.

I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.

Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.

Anyway, thanks for any input on this!  

I have just purchased a Kanger K Simar 20 and I loves it! Only problem is that the voltage is far too high for my Kanger Protank 2. It is giving me plenty of vapour but no taste apart from the burning.
This is the 1st mod I've bought and have been using the vapeonly V Power which is perfect with the protank. I love the feel and look of the K Simar 20 and want to hang on to it. My question is do I now have to start looking at a higher end tank for the mod to counter it burning my atty and what should I get.
Any help or suggestions would be greatly appreciated. Thank you.  

I have had a kanger protank 3 for a year and a half now with a itaste vv battery, i need a new updated Ecig now.

I am willing to spend around £30 (no more than £35) and would need a battery and a tank.


I want the best flavor and vapor production for the money. I also want it to be reliable as the kanger protank 3 leaked a lot in my time and sometimes would randomly stop working.


Thanks guys!