Well, After Months Of Curiosity I Finally Got.....

I just got my Aspire Atlantis in, and to be honest I'm not at all satisfied, and I can't help but wonder.... Did I get a defective unit?

I bought it and the Kanger Aerotank Turbo quad coil tank. My resistance on the Kanger is registering at 0.9ohm and I'm sending about 23watts to it. The amount of vapor is excellent, flavor is good, and it's not an overly warm vape at all.

So then I slap on my Atlantis. The 0.5ohm is registering at 0.6 (big whoop...lol) and I'm sending 28 watts to it. First, the hit is BEYOND airy. I'm on the lowest airflow setting and there's no pull required at all. I believe it isn't sealed well somewhere along the airflow adjustment, because when I blow a bit of vapor back into it as a test, it comes out of the airflow hole (obviously) but it also flows out of other areas around the airflow ring. This doesn't happen with my Aerotank Mega, Aerotank Turbo, or my Nautilus...

Furthermore, the hit itself is just BAD. The flavor is off, the vapor is WAY too warm to be enjoyable, and where as I exhale nice sized clouds using the Aerotank Turbo, I exhale pathetic small clouds that aren't even thick when I use the Atlantis. Considering its a lower ohm with more watts going to it, how is that even possible??

So, no resistance at all on the airflow, even on its smallest setting, and obviously I have to be getting air from some areas around the airflow ring. The vape itself tastes bad (not burning cotton bad, just a bad flavor), and it's VERY warm. If I try and pull on this the way I do with the Turbo (only 0.3 ohms higher), I exhale a measly small thin cloud AND I often get choked when doing so.

So I'm just curious.... Is this the way this tank hits?? I can't believe how many praise it if so, I see no appeal. So I can't help but think I must have gotten a defective tank. I've tried lowering the watts down to about 22watts just to see, and even though the vapor wasn't AS hot, it was still uncomfortably warm and did not do my liquid's flavor any justice.

Any thoughts? I really would like to hear if this is how these new sub ohm clearos are going to hit, because if so I have absolutely no interest in making the switch.

Thanks in advance,
Finch  

I'm curious. I went from a crappy Evod, to a Vision Spinner 2, to and MVP3.0, and now have an istick 50w to go with my mvp. I use a couple kanger subtanks and an aerotank just for flavor choice. I feel like I would never need anything better or especially more powerful than these ever. The highest wattage I vape at is like 16.5 max. So I see lots of people saying these are good starter boxes, or that theres is 100 watts, and whatever else. Why? I'm seriously curious. I mean hell with my track record of ugrades it's not far fetched that I'll be one of those people one day lol. But right now, I feel like it can't get much better as far as flavor, power, and battery life. I know there are better, my question is why.  

Just curious what wattage you guys are comfortable with. I just got my Itaste mvp3.0. I have the Kanger Subtank Nano with a .5 ohm occ. The mvp recommends 25-30 watts for that. But the coil itself says 15-30 watts. Kind of confusing. Anyway I keep mine between 15-20 watts. Anything more heats the tank up too much, like I can feel the heat on my lip.

I just picked up a Kanger Genitank Mega also, haven't tried it yet but it came with 1.8 coils, so I'll probably start at about 6-7 watts and go from there.

I love this thing, so far very happy with my purchase, hopefully it holds up for a long time. I guess just want to see if I'm doing everything safely.  

Curious if any of you have gone to the Kanger Aerotank from the Nautilus Aspire tank? I have two Nautilus tanks and I have to say it is real hit and miss when I change the coils out. Sometimes I will have a clean hit and no burnt taste and other times it is burnt tasting for the life of the coil. A local vape shop told me to switch to the Kanger Aerotank. They did not have it in stock so I ordered it to try. Yes I am doing the whole prep scenario with the drops and hitting it 4 to 5 times before hitting the button. He told me it is common with the Nautilus, but not with the Kanger Aerotank. Any feedback?  

Hello fellow vapors. I recently broke the Pyrex chuff that came with my turbo. Searched the web high and low for areplacement. No luck. One day at a local vape shop, I mentioned it to the owner. He took a look and the light bulb came on. Try this, he said and what did you know. The aspire alantisreplacement tank is the solution. Just wanted to share this. Happy Vaping, folks!  

So after a little over 2 months of sub-ohming with Kanger exclusively (mini and nano), I think I'm gonna get a first version Aspire on Friday. Not because I'm tired of Kanger, quite the opposite actually I'm really satisfied. But, I don't wanna get into the real high wattage cloud contests necessarily, I want to keep good flavor and it seems like the 2 biggest tanks in the sub ohm market are the Kanger subtanks and the Aspire Atlantis. So I found one used for 20 bucks, I figured I'd give it a try. What kind of differences between it and the Kangers should I expect? I know some people think they have better flavor. They use different ohm level coils as well right? What kind of wattage do you run one at?  

Hi all

A friend of mine is after a new tank, he Loves my subtank but doenst have a mod to run it properly.

He DOES NOT want to buy a new mod, but wants something thats similar in airflow and ability.

What would you suggest? Kanger aerotank maybe?

ALSO

Does anyone know the width of the aerotank series? mini, giant, mega? his mod is 23mm wide strangely and he wants it to look as good as it performance. ​
 

I searched long and hard for my perfect vape...and I sort of found it. I have a REO with an RM2, a dual 18650 mech, and now a SMPL mod. I also have a derringer, MXv3, hobo, and magma. I've been using the REO and drippers almost exclusively with the exception of my "morning vape" in an EVOD/eGo combo. I tried using my subtanks on my VF clone the other day and just can't seem to dial them in to taste good anymore. I either fry a coil or the juice that use to taste good in them doesn't anymore (or I can't find the sweet spot). I'm using the 0.5ohm coils in the subtanks. I run anywhere between 0.5 and 1.2 ohms in my drippers with 26g or 28g.
Did anyone else run into this problem or is it just me?


Sent from my iPhone using Tapatalk  

I've been vaping with v4l and v2 e-cigs for a couple years mostly the ego style ones. I love messing with all the technology I have and I'm very hands on so I figured I'd stop limiting myself. I bought a Sigelei 100w Plus, Kanger Sub Tank Mini, and a Mutation X V3 RDA.

WOW

I feel stupid for not doing this earlier. I've been vaping 12mg for a couple months now, but bought 6mg for the Sub Tank and RDA and that is even too strong! I diluted it with 100% PG to make it 3mg and it is much better. I couldn't be happier. No dry hits.. no leaking... all the problems I've dealt with over the past couple years are gone and I'm experiencing vaping like never before.

Success!!

Plus I finally convinced my GF to start vaping on New Years Eve and she hasn't looked back. She's using the V2 Pro Series 3 which she loves and we even found some really good house made flavors at a local vaping shop that we really liked. She got cotton candy and I got cigar. I didn't think a vape shop would have juice that good and they even made it fresh right in front of us. To my surprise no steeping required!

Alright I'm rambling. I will leave you with this pic.. and to all you musicians out there that is a ART Pro MPA II preamp with genuine Telefunken tubes from the 60's.

20150316_191947 by joshfiricano, on Flickr  

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance