Well decided to bite the bullet and get the istick 50w and the Atlantis 2, so far so good I got it off a Canadian website both for 120 and received it the next day! Gotta say the Atlantis 2 is our of control lol nothing compared to my aerotank mega put about 20 ml through it so far and not a single dry hit, seems to eat through juice like crazy tho lol and maybe just a little too much air flow for my liking but I'm sure I'll grow to these things but as they are kind of new their still a little weird for me, anyone else run this setup? Any tips or tricks for me? I noticed to get the maximum amount of liquid in it I screw the coil into the tank fill it right full then screw the bottom part on works well
So I recently gifted a friend of mine who is still getting his feet wet in the vaping world a Kangertech Aerotank Mega, and for some reason, he thinks you can fill it from the top, which I told him you definitely can not. I'll post the exact conversation here.
Him: you can do that with the Aerotank Mega too
Me: You can? I don't know about that.
Him: yeah but you have to be careful how full you fill it, of course.
Me: No. It's a bottom fill. The only way you could fill it from the top is if you only do it like halfway, due to the chimney being the way it is.
Him: then the mouthpiece part shouldn't be able to come apart from the tank, but it does, it's not even glued together.
Me: Yeah. That's called a drip tip. They're interchangeable. Your T3D is like that, too.
Him:
yeah, but with the T3D it's a seperate part that comes off, and doesn't leave the top of the tank exposed.
on the aerotank mega it's all one piece. either way, you can still only fill it so full from the top or bottom because of the center hole. it still holds a good amount though.
So, yeah. I'm pretty sure the only way you could possibly fill it from the top is if you took the top half of the chimney off and filled it that way, since the chimney is kind of in two pieces, but then you could only fill it to the spot where the chimney splits. Anyone who can definitively settle this for me?
So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:
Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg
There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.
So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.
So I'm deciding to try sub ohming and see if I like it, now will the sub ohm kangertech atomizers work in an aerotank? Also would an aerotank mega with sub ohm coils and a istick 30w be a decent setup for clouds? Or should I get an actual sub ohm tank like the Atlantis?
I am currently using the istick 50watts with the Aspire Atlantis 2. I just upgraded to the Atlantis 2 from the original Atlantis. I certainly like the Atlantis 2 better, I love the improved airflow I just don't like how hot the tank gets. I have it cranked all the way up to 50watts. Does anyone else have a tank they would recommended for the istick 50watts? I love chasing after big clouds. I would also like to hear any suggestions about how to get bigger clouds out of the set up I already have. Such as rebuilding/modifying the coils for bigger clouds or recommendations for ejuices. I've messed around with different pg/vg ratios to see what works best for me. If someone can give some suggestions as far as what they like or what they've found to work best, I will certainly check them out. I have a tendency to lean more to sweet or fruity flavors, but I'm open to try anything. Thank you everybody in advance for any input.
So Aspire have announced an Atlantis 2 and Atlantis Mega along with a CF Maxx battery.
Will I purchase these? Yes! Am I excited? No!
Aspire revonutionalised the vaping world with the birth of the Nautilus. When the Atlantis arrived everyone was excited that Aspire had made a new model, and expectations were high! No way am I claiming the Atlantis is garbage, but after looking at it, there wasn't really a big wow. It just kind of looked small and boring! But performance is the main point!
KangerTech most likely Aspires biggest rivals had taken first place with their SubTank series! Although I hate Kanger! The more options and reliability were so much better than the Atlantis!
When I heard Aspire were releasing these I had high hopes that we would get an Aspire RTA with more Ohm option stock coils and a 50W 18650 MOD! But... Apparently the Mega tank and the MOD is 30mm so pretty big! Also it charges from a USB and there is no rebuild section! So all in all a few minor upgrades including drip tip changes and more airflow. But nothing that will make you want to buy one straight away. I'm an Aspire fan! I will support them and make a purchase regardless! Just think they could of done more!
One last thing! I was kind of put off of the fact they called it the Atlantis Mega! When there's Kanger AeroTank Mega! I would of thought they would make the effort and come up with something more unique!
Video he https://m.youtube.com/watch?v=swQHODWlqMA
im using an atlantis 2 with the .3 ohm coil and im using it on an eleaf istick 50 watt. my first coil from the pack was good. then went that burned out i put in a new coil and it keeps dry hitting. So i changed the coil. Dry hits on that one too. And on a third coil. Same liquid as i was using with the wattage at about 47-50. Why would it be dry hitting like this? also, it seems to be getting way too hot at those wattages
Hey everyone, so I already have the eleaf istick but I'm just using a basic useless clearomizer on it. Is the Aspire Atlantis compatible with this battery? The iStick is 510 threaded, so if anyone can tell me if the Atlantis is 510 threaded, that'd be great. If not, is there some sort of adapter I can purchase? Thanks!
Hey guys I'm looking to upgrade from what I have right now which is the atlantis v1. I'm not a huge fan of the atlantis because of the inconsistency with the coils and the loss of flavor after 2 tank full. The atlantis v2 seems nicer with the occ coils and improved airflow, but I'm not sure if its worth the upgrade since I could just get the new 5-pack occ coils for my v1. The subtank mini still has better options with the occ coils and RBA. Also it seems the occ coils for the subtank is easier to rewick which could save me a few dollars.
I'm not sure which one to go with. I'm leaning more toward the subtank, but still not sure. Maybe someone who has either one or knows more about them could help me. I like to have a good amount of clouds while still keeping the flavor.
Or if anyone has a sub-ohm tank they could recommend that they like more than the ones I mentioned that would be good too.
I use an ipv2
Thanks
So I just picked up the Atlantis 2 today and I have a few questions/concerns.
First off:
What is a good wattage range for the .3 ohm coils ? Im guessing somewhere between 40-70w
Does it have a weird brake in period ? Because it's not producing very much vapor at all...
I put a 3mg juice in the tank and it's hitting like a 8mg or 10mg which is weird.
Anyone else having problems with it ? I'm using it on a 150w Sigelei
I just got my Aspire Atlantis in, and to be honest I'm not at all satisfied, and I can't help but wonder.... Did I get a defective unit?
I bought it and the Kanger Aerotank Turbo quad coil tank. My resistance on the Kanger is registering at 0.9ohm and I'm sending about 23watts to it. The amount of vapor is excellent, flavor is good, and it's not an overly warm vape at all.
So then I slap on my Atlantis. The 0.5ohm is registering at 0.6 (big whoop...lol) and I'm sending 28 watts to it. First, the hit is BEYOND airy. I'm on the lowest airflow setting and there's no pull required at all. I believe it isn't sealed well somewhere along the airflow adjustment, because when I blow a bit of vapor back into it as a test, it comes out of the airflow hole (obviously) but it also flows out of other areas around the airflow ring. This doesn't happen with my Aerotank Mega, Aerotank Turbo, or my Nautilus...
Furthermore, the hit itself is just BAD. The flavor is off, the vapor is WAY too warm to be enjoyable, and where as I exhale nice sized clouds using the Aerotank Turbo, I exhale pathetic small clouds that aren't even thick when I use the Atlantis. Considering its a lower ohm with more watts going to it, how is that even possible??
So, no resistance at all on the airflow, even on its smallest setting, and obviously I have to be getting air from some areas around the airflow ring. The vape itself tastes bad (not burning cotton bad, just a bad flavor), and it's VERY warm. If I try and pull on this the way I do with the Turbo (only 0.3 ohms higher), I exhale a measly small thin cloud AND I often get choked when doing so.
So I'm just curious.... Is this the way this tank hits?? I can't believe how many praise it if so, I see no appeal. So I can't help but think I must have gotten a defective tank. I've tried lowering the watts down to about 22watts just to see, and even though the vapor wasn't AS hot, it was still uncomfortably warm and did not do my liquid's flavor any justice.
Any thoughts? I really would like to hear if this is how these new sub ohm clearos are going to hit, because if so I have absolutely no interest in making the switch.
Thanks in advance,
Finch