Mouth Juice

I have an aspire Atlantis tank on my ipv mini. Juice is getting in the mouth piece. is it supposed to do that? Its not a lot I can just look in it and see a couple little drops. I don't think its getting in my mouth. Also any one had problems with mouth ulsers from vaping? I quit smoking 10 days ago and I have like 3 or 4 :-(  

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

Hi, I have having issues with the kanger subtank mini sucking hot juice into my mouth with the rba deck it doesn't happen with the occ coils please help....  

Just built first coil on subtank mini RBA and it works great otger than excessive popping hot juice to my mouth...any suggestions? ????  

How would I be able to tell if my drop tip is getting juice in my mouth? I vape 6 nicotine. Would there be a certain taste? the reason I ask is because juice us always in my drop tip. I don't think its getting in my mouth lol I just want to make sure. thanks  

I only have this problem with one juice flavor. It has to be the juice. Same tank and setup as all my others. I have a fresh coil and tank, load it up, and in less than a day my coil is gunked up and turns my clear juice dark brown. Is this safe to vape? It's annoying having to finish it and rinse my coil. Usually I can just fill my tank/top it off without worrying about cleaning it all. Anyone else have this issue?  

okay so i hope i'm posting this in the right place, but i have a nautilus mini that i've had since december and i just bought a new coil for it yesterday from my trusted local vape shop and it was working okay at first, but then it started gurgling and spitting juice into my mouth

this isn't the first time it's done this, i actually stopped using it for a while because of this problem (and the coils were old, so i thought that's what was causing it) but i just put a new coil in and it's still happening...

i have scoured the internet for reasons why this might be happening and i've tried every trick in the book and nothing has worked

PLEASE HELP!  

When I go to take a puff on my aspire tank, it shoots out a little drop of heated juice. Only right when I hit the button on the battery. Only way to describe it is that it looks like a shooting ember coming out of the mouth piece.

I'm afraid one day it will hit me in the eye or someone else. What is causing this?

Thanks.  

Well I decided to eff around with the rba section on the subtank mini tonight. And I swear I have the worst luck when I comes to rebuildables. Had a horrible time with my egrip rba base and now this -.-
Wicking is spot on, everything's together right, and I'm getting a good amount of juice into my mouth when dragging on it. This is becoming a headache  

Starting from a clean - authentic nautilus mini - with a brand new 1.6 (or 1.8 it makes no difference) coil (coils also verified as authentic).

1. Turn tank upside down - with tip removed and fill with juice.
2. Take base unit and set so no air holes are open.
3. Put a tiny bit of juice around the o ring of the base unit (i get the issues if I do this or not)
4. Put 2 small drops of juice into the coil (I get the issues if do this or not)
5. Screw the coil into the base unit (as tight as you can comfortably get it without going past the obvious stop point and damaging something)
6. Screw the coil/base unit into the tank.
7. Turn nautilus mini correct way up.
8. Move air hole to a middle setting.
9. Take some primer puffs with no power.
10. Leave standing for 5-10 mins.
11. Begin vaping gently at 6 watts - moving up slowly to 10.

Ive tried all types of juice - both high VG and high PG and in-between. Invariably at some point i start to get the gurgle. Ive tried the following fixes:

1. Using a paper towel blow gently out of the air hole to get rid of juice - doesn't work - if i kept on blowing id blow the whole tank of juice out.
2. Take the unit apart - most times there will be juice in the base unit underneath where the coil sits - dry this out - dry the coil off and repeat from step 2 above missing out steps 3 and 4. - this sometimes works but its a temporary fix.

There seems to be no pattern to the problem. Sometimes the gurgle starts as soon as ive changed the coil - sometimes its ok for a week. I have 2 units and 2 spare tanks and have rotated them all using the above method - still get the issues.

I have actually never experienced the burnt taste or reduced draw because Ive always got sick and binned the coil before that point.

I am vaping generally at 9.2 watts - but have tried as low as 7 and as high as 13 - it makes no difference.

I don't draw hard - I cannot understand why I keep getting juice in the air chamber - its not a problem with a "dud coil" unless they are all intermittently dud coils - they are all authentic aspire and I've bought them from different places - so its not a dodgy batch issue - the rings are all the correct way up - I have spent hours and hours researching to try to fix these issues - and cannot for the life of me maintain a stable nautilus mini.

Can anyone save me from madness and tell me what Im doing wrong - Im tending towards a conclusion of all nautilus mini components are junk at the moment.

Many thanks in advance