So ran into another problem with my itaste 134, it was working fine a few hours ago. I went to refill my tank and when I put it back on it wouldn't fire, I looked at it and noticed when ever I pressed the bottom the light would instantly turn on then stay lit for 5 second. But no vapor at all. It now does this with or without a tank on it. Any idea what this could be?
Hey guys.. i been vaping for a while and not had this hapen before.. i am using a Hugo Vapor Rader and ot has been working with no problems until today... when i go to use it, when i try to fire, it says high atomizer the first time i push fire button followed by low battery (have tried multiple sets) when i press again. If i persevere and keep attempting to fire it works fine as if there were no problem until the next time i go to use the device when the process repeats.. i have taken the tank apart and cleaned and put back but the issue continues.. anyone have any ideas on what is wrong/what i should do?
So I dropped by brand new MVP. I had the Eleaf Melo tank installed when it hit the ground. Didn't see how it landed or anything. But when I picked it up and tried to vape the resistance reads "-.-". The device seemed to be fine, so I thought maybe the coil or tank fell out of wack and tried it on my iStick 50w. It worked fine!
So obviously it must be the MVP then?? I installed another Melo that I bought and it works fine on the MVP. But after disassembling the older Melo (that was originally on the MVP) and putting back together it still will not fire on the MVP, just the iStick. I tried playing with the center pin on the Melo but have had no luck.
So what the heck is going on?
It's an Innokin Endura T18 II. I bought it just a week ago. Everything was working fine until this morning when I tried to fire it and it just blinked three times. I thought maybe there was a problem with the coil, so I put a new one in. It was still blinking. So I made extra sure the coil was in properly. Then it started working again. I vaped for about an hour and then it started blinking again and wouldn't fire. Any idea what the problem is?
I am regretting just buying the Ego One battery and not the whole kit because it is not making a good connection with the sub-tank nano. When the tank is screwed all the way down on it won't fire. I have the loosen it a little to find the sweet spot for it to fire. I have tried pushing the pin further out of the bottom of the tank and I used a deoxit gold and neither have helped. Any suggestions. Thanks.
righto heres the story. started out with those ridiculous ecigs that looked like a ciggerette. but has the red light for a tip. Got it from our Neighboring country. next i found someone and got a Innokin itaste V3 and a ****ty tank. it was the budget kangertech tanks which has many problems.
after browsing around i decided to check out the ELEAF ISTICK 30W with a kangertech subtank nano.
What do u guys think of this combo?! also what box mods and tank combinations would u highly recommend? so spoiled for choices here!~ Feel free to share your experiences of your first devices! The more we learn the more better!
Yours sincerely.
Vaper from a FINE country.
So I recently bought a brand new Vaporesso Gen mod. Normally I stay away from compression/press fit 510 connections but I decided to give the Gen a shot. I've only had it 1 day, and already I've noticed that the 510 connection is raised slightly above the top of the mod and with a tank connected it is slanted towards the back of the mod. From what I can tell the 510 isn't loose at all. But it still slightly worries me. And a couple times I've taken a hit and everything is fine. Then all of the sudden while my finger is still pressing down the fire button it stops firing. Has anyone else experienced this with the Gen?
I was borrowing my bro's Atlantis, for awhile. I put a new coil in it, a couple days before I returned it. It was hitting great. When I give it back, we dump the juice back in a bottle and put the tank back in its original box. About a week later, he sells it to my brother in law. Here's the weird part - we fill up the tank, assuming the coil needs no priming, and fire it up. It seems to be weak on vapor production. It has the nice crackle/pop, and there is no burnt taste or dry hits, but it just isn't producing the volume it used to.
Is this because it sat for a week?
I have an istick 20V which I use an Aspire tank ... the adapter is stuck to the bottom of the tank I cant unscrew it. any one have an idea how to remove it other than pliers and ruining either the bottom of my tank or the adapter?... I tried hot water n soap but no go. any suggestions will be appreciated
my cigs name is blu plus+
i want to refill the tank but i don't know even how to open
also i looked for youtube videos but they used cartridge.
i mean different type.
so i want some brilliant method or advice.!!
(don't recommend me another e-cig cuz i have few ecigs already)
(the picture which i uploaded is old type ,my one is new type)
I've got a VTR that i was using with an aero tank, but was burning through coils like every 4 days. Local vape shop recommended the nautilus mini since that's what the owner uses with the same juice I use. Doesnt quite fit with the VTR ring, but they showed me how to screw the base in and just pop it in that way. Cool, no problem right? Yeah right.
I go to refill and i cant get this ....ing thing off at all. The 510 connection is not stuck in to the device, but the bottom ring to unscrew the glass part is just not budging at all. So now I basically have a inert device and tank that cannot even be used and I'm out 52 bucks in total for this damn tank and coils.