I have just purchased a Kanger K Simar 20 and I loves it! Only problem is that the voltage is far too high for my Kanger Protank 2. It is giving me plenty of vapour but no taste apart from the burning.
This is the 1st mod I've bought and have been using the vapeonly V Power which is perfect with the protank. I love the feel and look of the K Simar 20 and want to hang on to it. My question is do I now have to start looking at a higher end tank for the mod to counter it burning my atty and what should I get.
Any help or suggestions would be greatly appreciated. Thank you.
Hi, sorry if there is a similar thread I am relatively new here,
I have always had issues with burning e liquid over various devices and brands,
I currently have a istick 30w with a kanger subtank, only bought the tank yesterday and battery last week, however it was fine yesterday, was vaping at an average of 17w, however i did go up to 30w depending on stress levels (And i'd gone from 20mg to 6 mg given i was now subbing) - However since today i have noticed a burning, almost coppery, metally (Apologies for my brilliant description) accross the range of vaping, used to get it with my old i stick but only when i was vaping at higher levels, however now it is happening all accross the range, obviously a lot worse and completely metally at higher wattage, any advice? - Swapped out the coil to the 1.2 and it was still doing it, with a fresh refill of liquid, was adding the coil properly and everything. just thought i'd solved this issue. many thanks for any advice, this is a £80+ setup so i want to get anything returned if there is anything wrong with tank etc/
EDIT: When I was in the shop they mentioned it could be the pg/vg of the liquid, however it was doing it at 70/30 and now 50/50, any advice?
Hi,
I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.
I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.
I am not interested in a big old MOD or anything. I like the pen-like style.
I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.
Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.
Anyway, thanks for any input on this!
So I just bought the x6 kit with the kanger protank 3. Added my juice which is 100% pg free and barely get any vapor off of it at all. To be sure I'm doing something wrong. I got more vapor off my old ce4 than this thing. Any suggestions to what the problem may be? I'm using the medium voltage which I believe it 3.8 I tried the highest which is 4.2 and still nothing much..
So I need to make sure right off the bat that no one misunderstands this post as somehow an attack on any vaper of any kind. I'm posting this because I have become genuinely curious and feel I may be missing out on my vaping experience. I've had an APV of some kind or another for the last 2 years or so, nothing ever real fancy or expensive (I just got an istick 50W and love it) but APVs none the less. I have found that I only really vape at very low Watts/Volts compared to many on this (as we speak I'm vaping The Virus in an old original model protank with a 2.2ohm coil in it at 3.8V--6.5W). Now it's not because I don't own a device that can reach the Watt levels I want, any of them can; in fact, I purchase higher resistance coils so I have a bigger range to vape at. My first VV battery was an ego style twist, and I have always kept with the same mentality (again, I'm not suggesting this is the right way, or better than others at all)-- I start at a low voltage, hit it, and continue to raise it .1V at a time until I get a burnt hit. I dial it one down, and there I am. Now I always use the Variable Voltage setting, and where I vape usually works out to be in the 5.5-7.5W range. Now, I have noticed that this is astoundingly low for the devices I use. My question is: when vaping at such high Watt levels, how can you taste the juice at all? I mean, at home (obviously not out in public) I would love to be getting even more satisfying vapor from these devices, which is clearly possible. So what am I doing wrong? What am I missing? Why is it that in the 6-7W range even my hits taste so burnt and dry I would never dream of continuing? All of your information/advice is greatly appreciated. Vape On.
okay, so i had a problem yesterday where i would keep getting juice popping up on the draw, that problem is solved, however, now on only the second day of light use, on the 1.2 ohm coil that came with the tank i am getting a pretty harsh smokey taste. Its not overwhelming like it is when a coil is burnt out, just an unpleasant taste. I did 4 drops of liquid on the coil before using, everything is screwed in tight. Do i need maybe a couple more drops on the coil?
FYI: using an istick 30w burning at about 14.5-15w
Will this tank break with certain juices? Also will it fit on my battery?
Zen Pen Electronic Cigarette Kit
Mini Kanger Protank 2 Mini Pro Tank Glassomizer
I figured this would be the Second best place to put this question but the other forum doesn't produce any replies. So I posted it here. Simple answer if you know what to use to glue glass to metal and will be non toxic!
On to the question, I have a first generation Kanger Protank where the body, glass bit, is glued to the bottom metal piece that screws into the Skirted piece of an eGo battery adaptor. One friend was using the glass piece to screw the Protank onto and off of her mod and to refill the ejuice. Short story shorter she popped the glass piece of the first gen Protank.
Big question part, what type of adhesive should I use to "GLUE" the Glass to the bottom metal Piece. Something that is non toxic and will survive the repeated stresses of day to day use that a Protank would encounter?
Thank you for your understanding, Moderator's, the Cross Post.
I have had a kanger protank 3 for a year and a half now with a itaste vv battery, i need a new updated Ecig now.
I am willing to spend around £30 (no more than £35) and would need a battery and a tank.
I want the best flavor and vapor production for the money. I also want it to be reliable as the kanger protank 3 leaked a lot in my time and sometimes would randomly stop working.
Thanks guys!
I am new to vaping. I am starting out on a kanger protank mini3. I recently replaced the coil, cleaned it, reassembled and changed out the juice. My problem is that every few hits, it tastes really bad. I read that it could be a dry hit, so I tried to work on that. I did dry burns and primed it without pressing the button. I even loosened the coil slightly making sure it had good air flow. I am completely befuddled. It's not constant, just every 6-8 hits it so. Any advice would be sooo appreciated. Thanks!
Hi, I was thinking about buying the Kanger 1.2 ohm enclosed wick but am not sure exactly what wattage or voltage to use. I currently use the Protank 3 on my Istick 50w. I am currently using the 1.5 ohm wicks and run my device at 9.2 watts and 3.8 volts. So I was wondering if this is right and if I should up the wattage for the 1.2 ohm coils and leave the voltage the same?