Sorry guys, I wasn't sure exactly where to post this, it could fit into at least 4 different forums so if this isn't the best one please move it to the correct forum.
As the title states, does anyone have a P3 Titanium + Kayfun v4 and can share a picture? I'm just trying to get a sense of how the Ti looks compared to the SS used on a lot of tanks, specifically the Kayfun v4. Also, a picture with the P3 Titanium + Squape-R would be great as well.
Not to be picky or anything but I would really prefer authentic versions over clones as I plan to buy the authentic versions.
Thanks everyone, it's much appreciated!
To all the mouth to lung (Tootle Puffers) here ... There was a time when the famous "Kayfun Lite-Plus V2" was the gold standard when it came to single coil / higher ohm / low amp Tootle Puffing.
Now that this atomizer (to include all the Chinese clones of it) are so very hard to come by (to include spare parts), has anyone here replaced there old Kayfun Lites with the new "Kayfun Lite 2019" atomizer ?
I just ordered a couple of Chinese clones of the Kayfun Lite 2019 so I can make the big changeover.
Good bye to the sweet Kayfun Lite-Plus V2
Almost 6 years vaping on this
Rest in Peace ....
Just wondering what everyone who has used both tanks think of there effectiveness. A 1.6-1.8 bvc coil nautilus vs a 1.5 micro coil in a kayfun v4 (clone). Would you rate them the same?? I only ask because it seems the nic (6mg) in my nautilus tank at 17 watts has less effect than my kayfun 4 (tobecco clone) at 17 watts, (same juice 50/50 mix) Obviously the kayfun is not a dripper, but does the micro coil have any impact as far as vapor effectiveness??Sometimes I think I get a little nic sick compared to the the nautilus mini. idk maybe I'm just paranoid lol
So I've been using a Kayfun v4 and provari p3 using the hybrid connector and have never been able to get th ohms below 2 using .2mm guage kanthal bought from Vape escape one 2 mm coiling tool and about 6 wraps was initially happy with that but after reading the results other users are having they typically end up around 1.2 1.4 ohms using far more wraps then I have been using I tried to increase my coil diameter to 2.5 mm and the ohms exploded to 5 ohms making it unusable I have noticed that my spring in the Kayfun gets incredibly dirty and charred with what I can describe only as soot if anyone has any insights into what could be going on I would much appreciate it ive been enjoying my Kayfun but I'm still looking for that mind blowing Vape I keep reading about
My Kayfun is around 10 months old and beat up. I was looking for replacement and wondering what else is out there that you recommend. I vape around 1.2Ohms and have been happy with my Kayfun. Just wanted to check with you all to see if there is something else I should try.
Tx
I saw one on Ebay once and should have bought it then. Now all I can find is places I have never heard of and this Tobeco ss/black/blue kayfun 4 atomizer rba kayfun 4 wholesale best quality kayfun 4, View kayfun 4, Tobeco, tobeco Product Details from Shenzhen Tobeco Technology Co., Ltd. on Alibaba.com#! which I am not about to buy 20 of them. lol Does anyone know of a place that has them? I would rather have someone suggest a place than get it from a place I have never heard of. TIA
Just recently purchased a Orchid V4 and loving it so far.
Though the Orchid uses two coils.
Considering adding a Kayfun to my modest collection.
My understanding that the Kayfun uses a single coil.
That being said, does it still vape as good as a Orchid V4?
Im sure theirs members here who can give first hand info on these two?
May like to share pictures?
And builds, methinks 28g is best.
Though I may try some 24g.
Running 28g ten wraps, .9 ohms.
21watts seem to be my sweet spot.
Just wanted to pick your mind on these.
Jim
So I had an OG iStick with an ehpro kayfun v2...good set up worked well. Now the kayfun is stuck on the mod and I can't get it off. It turns slightly and makes a "click" sound then nothing. Anybody ever have this happen and fix it? I'm assuming maybe I had the airflow screw too far out and it could've dropped into the airflow grooves on top of the istick? Or maybe the threads finally just locked it up on me? I bought an new 50w istick, but I want my kayfun on it. Prob gonna just go buy a Lemo, but if I could manage to get my kayfun back I'd still like to use it in my rotation. Any thoughts?
Hi everyone, I'm looking to build my kayfun 4 clone (infinite) to accommodate high vg Bobas bounty any ideas are welcome, I have 26, 28 and 30 g kanthal along with organic Japanese cotton. May the moderators let this thread fly for the night as when they push it to the builds forum I lose the most of the forum input,
Thanks
I'm at my wicks end with this whole rebuilding thing!
Having given up anologs with my Nautilus Mini, I thought I'd treat myself to an authentic Kayfun v4.
My first rebuildable. It vapes great, lots of dense smooth vapour, but the cotton tastes awful!!
Tried cheap cotton from the chemist. Tried Koh Gen Do. The best so far has been Klaud cotton, but there's no denying it. While the vapour is superior to my Nautilus the taste is no where near as good.
Everything in my Kv4 tastes of cotton with a hint of the juice flavour.
I've watched all the videos on you tube, it's wicking fine, but cotton just tastes bad!
7wraps, 3mm ID, 28g Kantal, 1.4 Ohms.
Promised myself a Vapor Flask DNA40 for the Kv4. But if I can't get it tasting better
then this the Kayfun can go in the bin, I'll stick with the Nautilus Mini's on iStick 20w's.
Just as the title says..just bought a kayfun lite +/ Russian 91% clone, and the drip tip gets hot after a few hits..using mvp 2.0 that only goes to 11 w ( which is where I usually vape) with 1.7 coil/cotton wick..should I just look into another drip tip made of a different material? This is my first rta..my protank 2 tip never got hot even when chain vaping..the tank would warm up pretty good, but never the drip tip.