Ipv Mini V2 Problem

So I currently have an ipv mini that goes to 30 watts, a couple mech mods I never use anymore, and a Hana knockoff (didn't know, or wouldn't have bought. Got it back when I was a clueless noob).

I am insanely jealous of, and constantly use, my friend's Sig 150watt. What I like about it is just that, the wattage. I love vaping at 65-70 watts. Sometimes higher. So I know m just for the sake of saving money later, I want something that gets AT LEAST 100 watts.

But now these tempature regulated mods have hit the market and I have heard wonderful things about the flavor. But is there any that go above 100 watts worth knowing about?

So now I don't know if I should get the Sig 150, the ipv 3...or go down in wattage some but get tempature control. Any suggestions, help, and wisdom is greatly appreciated.  

Sorry don't know if this is in the right forum.

I have had a mini nautilus for about about a week now.

I've been through so many threads on other people's issue with gurgling and can't find a fix.

I don't get spitting it's just the noise. It's really frustrating me.

I checked website for my mini and it is verified genuine.

Anyone with any suggestions?.

Tried everything mentioned else where. Tried new coil and still making noise. My coils are BVC that cake with verfied mini.

On very rare occasion it doesn't happen it seems to be when I'm on my car which is strange.....

It's leading me to believe it is a problem caused by temperature.

If I can't get this fixed then I'm going to just go back to using my profanity 2 which is a shame as the mini provides better flavour.

I don't see how it's got such good reviews..

Please help  

I am new to the mod world and I entered the foray with an IStick 30 and a Kanger Subtank Mini. When I use an old cheapo tank that came off an earlier Ego my juice taste fine. It's a 2.7 ohm coil set at 7.5 watts at 4.5 volts.The problem is the taste with my Kanger hooked up. It is very harsh. I also do not get the same visible exhaust (sorry, but I can't think of another term ) I operate it at about the same watts. I have tried both a sub ohm coil and a 1.2 ohm coil. I have also tried different air intake settings. One thing to note: The cheapo tank gives me a much tighter draw (It's harder to draw in the air). I have adjusted the Kanger down to the smallest inlet and the resistance still seems very easy.

Would the difference in resistance of the coils affect the taste with running the same power. Do some juices just not taste good with different tanks? I must be doing something wrong. Maybe I assembled it wrong by leaving out something but for the life of me I can't see what? I did insert a little piece of cotton in one of the coils which was foreign to me.

Any ideas? Fire away and don't assume anything. Again, I am ignorant with these mods so I am learning here. Thanks a bunch  

Hey everyone,
I've been vaping for about two years now, and have decided to start dripping. For the last few weeks, I have been dripping on an IGO-W, 26G Kanthal single coil (7 wrap micro coil reading at 0.8ohms) on my iStick 30w.

I just recently purchased a new battery that should arrive today, and was wondering if anyone had advice/tips on producing some fat clouds! Dual Coils? Different coil builds? Number of wraps? Watts to vape at? I think you get the picture lol.

The items I will be using are as follows:
-SMOK XPRO M80 Plus
-IGO-W
-26 Gauge Kanthal Wire
-Japanese Organic Cotton
- 80vg/20pg Juices

All input is greatly appreciated. Thanks!
-Tyler  

Got kind of a strange question that I probably should be able to figure out on my own but I'm really bad at math.
What would use up the battery quicker.. a quick let's say two-second burst at 50 Watts or a 6 second press at 30 Watts? Tia.  

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

Hello everyone I recently purchased an ipv mini v2 and I love it, it is working perfect. I only have one complaint the fire button rattles like crazy and it drives me nuts. To some it's not a big deal but I just don't like it. So do any of you out there know if there is a way for me to fix this? Once again everything else is perfect ohms and all that it's just the fire button. The wattage up and down buttons are supper tight and clicky. Any help would be greatly appreciated. Thanks  

I am running my Kanger Subtank mini rba deck on .9 ohm (spaced 4 wrap 28awg IIRC) at 13 watts and it is cloudy and flavorful. The OCCs were fine but I prefer the rba I think (even though I'm still a bit of a build novice). Many others seem to run it at 25+ watts and lower resistance. I had it at .5 Ω and ~19 watts was good, had dry hits above 23 watts. Now have dry hits above 15 watts at .9 Ω. I'm still playing around, but this current build/wattage is working awesome.

Other important factors:
Tobacco and vanilla DIY juice 4mg 50/50 PG/VG Organic cotton, standard wick Only had Subtank for 3 weeks Coming from BCC clearos Been vaping for 6 years Used to be mouth-to-lung, doing a lot of direct lung but still switching back sometimes What's your style with the Subtank? How are you running it? What's your wick-style? Dry hits? Wattage? Ω?  

My main go-to setups these days are Nautilus tanks (both sizes) with 1.8ohm BVC's on mini boxes like Eleaf iStick and Heatvape Defender, but since I got the Defender and it can go down to 0.5ohm with it's 25 watts I decided to give it a go.

So I recently purchased a 22mm Peakomizer 2 Mega tank with Aspire Atlantis 0.5ohm coil and just recently tried it out around 25 watts with my favorite 70/30 vanilla flavor juice.

Now maybe this is partly to do with the tank I bought but even on the tightest airflow setting I feel like it's just too much. It seems to kind of force me to do deep straight-to-lung hits and I'm just not into the experience. I like mouth-to-lung hits focused on flavor more than anything else and I don't typically inhale too deep, for more of a smooth creamy vape. But this experience was more like harsher throaty big airy inhale and I didn't dig it.

After literally just 30 minutes of checking it out I went right back to my Nautty's with 1.8 ohm BVC's between 7.5 to 10 watts and that's a happy place for me, so I'm probably going to sell the barely touched Peakomizer 2 tank and brand new Atlantis .5 coils (looking forward to getting access to Classifieds section here soon).

But still I'm interested in other vaper's thoughts on this. I'm curious to know if sub-ohming is mainly geared toward heavy lung hits and the airy experience I had or if there are ways to do it / certain gear to use so that it's a similar experience to what I'm used to.

As always, I'm just really curious to read the opinions and experiences of others. It helps me learn something new every day!  

Right now I have a cloupor mini and a magma and a subtank. But I'm ready to upgrade. I want to push the ohms lower and the watts up. My mini only goes to 30w but I'm looking to vape maybe 50 watts plus. So I'm thinking around a 70 or 75 watt mod and idk about a new topper. I'm thinking maybe a lemo and some kind of a new dripper. Maybe a plume veil or mutation x. Anyone have any recommendations. Btw I am on a budget.