So I dropped by brand new MVP. I had the Eleaf Melo tank installed when it hit the ground. Didn't see how it landed or anything. But when I picked it up and tried to vape the resistance reads "-.-". The device seemed to be fine, so I thought maybe the coil or tank fell out of wack and tried it on my iStick 50w. It worked fine!
So obviously it must be the MVP then?? I installed another Melo that I bought and it works fine on the MVP. But after disassembling the older Melo (that was originally on the MVP) and putting back together it still will not fire on the MVP, just the iStick. I tried playing with the center pin on the Melo but have had no luck.
So what the heck is going on?
I have an Eleaf iStick 30 & use the Aspire Nautilus mini with it. I bought a Melo tank to try sub ohm vaping, but don't like it (Melo coil) at .5 ohm. I do, however, really like it when I slightly unscrew it & get a 1.2 ohm reading for it.
I'd like to try the new Atlantis V2 1.0 ohm for my Melo tank. Why does Aspire list the power requirements for the 1.0 ohm coil at 40-50 w? I'm assuming they mixed up the specs for the .5 ohm and 1.0 ohm. Is this correct?
Does anyone knows if the Melo 5 tank will fit/work on an iStick Pico?
Wich is the best (clearomizer) option for istick 30w?I know that MELO was specially made for 30w one but I don`t know,maybe you know a better than this.I want with replaceable coils.I was thinking at Kanger SubTank plus v2 with 1,2ohm coil,Delta II with the same 1,2ohm coils,Aspire Nautilus mini BVC or the MELO.
Now I`m waiting opinions for those who know!
I have the istick 30w and want to get the eleaf melo. I use my istick now at 15w with a eleaf gs air mini. Can I use a sub ohm tank if I can't go past 15w? Anything more than that is too strong and chokes me.
So I"m thinking about getting a MELO tank so that i can have something for driving and being out and about. I have 2 big questions. 1) It says that the wicking material in the pre- built coils is something called 'glass fiber cotton"......what on earth is that? Surely to goodness they aren't using actual fiberglass but does this stuff actually contain glass? 2). It looks like a very well made piece. Does anyone know if it is 100% stainless steel (especially the chimney assembly and the coil) or is it that plated brass that will flake?
Why is the iStick Rim sold at Fasttech different from all of the reviews I've seen? It uses a removable 18650 battery and the USB port is in a different position. Here is the link $51.18 Authentic Eleaf iStick Rim C 80W VW APV Box Mod + MELO 5 Tank Kit - 4ml (28*21.4mm (OD*ID)) / 0.6/0.15ohm / 1-80W / 1*18650 / 28mm diameter at FastTech - Free Shipping
I just got a Delta II tank as an entree to sub ohming after a disastrous adventure with a MELO. Strangely enough, though, while blowing an occasional cloud at 30 watts is fun, I find I also like running it with the air flow pretty restricted on the tank and at 14-16 watts on the regulated mod and taking mouth hits. Really nice flavor and "just right" (to me) vapor production.
Is running a sub-ohm coil at low wattage potentially causing any damage to my mod (iStick 30w) or my tank?
I'm having trouble with my Jem Pen E cig - hopefully someone can help me.
I take the coil out clean the tank and battery area, put it back in with liquid + prime the coil. for about 5 minutes it tastes fine and is vaping as normal. then a really horrible burnt taste comes in which is unbearable to smoke and making my throat hurt.
I take the coil out and clean again, put more liquid. the same thing happens! it tastes absolutely fine again and then gets burnt.
any idea why this is happening ? the device gets quite hot too...
i don't think the coil is the issue because why does it taste fine for a few mins?
I've ordered new coils so going to try that but worried its the device. i've only had it for 2 weeks and changed the coil about 5 days ago.
Hey everyone. I just threw a brand new .5 ohm OCC coil in my mini Subtank and its reading .7 on an MVP 3 and iStick 50. I tried unscrewing and retightening and everything else seems fine. It usually reads my .5s at .6. Seems to Vape fine. Anything to worry about or you guys think it's normal?
I am looking back at my spending this month, and I've realized the thing I used to get off tobacco and save money is now my full blown hobby and obsession. Bad? Nah - but it was eye opening and shocking! Recently (past 2-3 months) I've bought (this is just hardware. If I listed juices, this post would just be dumb long)
IPV Mini
IPV Mini V2
iStick 30w
Nitecore I4 charger (I2 became not good enough)
4x efest 18650 batteries (to add to the 4 I already own)
case to carry them all in while on the go
Atlantis 5ml extender
20 Atlantis coils
Delta II
10 delta II coils
Delta II RBA
Sense Herakles Tank
10 Herakles Coils
Horizon Arctic Tank
Pre-ordered Lemo II
Melo Tank
22ga, 24ga, 26ga, 28ga kanthal
ceramic tweezers
eleaf atomizer checker
wraps to protect/customize all my mods
Vape Life Drip Tips
Subtank Mini
Subtank mini OCC coils
Kayfun 4
Coil master kit
Screw driver sets
Torch
Butane for torch
Now I want the High Voltage tank
WHAT AM I DOING?! THE STRUGGLE IS REAL /endrant
My favorite so far: IPV Mini II rocking the Herackles tank at 55w - mmmmm