Any recommendations for upgrading? I have a awesome custom 18650 parallel box, infinite stingray and atomo. My friend has a paragon midnight v2 and flawless tug combo. Any of them a keeper? I'm wanting to get a harder hitting device and don't mind going authentic. Any advice would be greatly appreciated?
so i have been asked a few times what i want for my upcoming birthday. at first i was going to go with the zombie splatter flawless tugboat mech mod/rda combo, BUT flawless decided to have a 50% off sale on Monday so i got it myself
i have been wanting to get a nice box mod for quite some time, but cant really decide on one. my main thing is i'm looking to get a dual 18650 device, for longevity.
right now i'm bouncing back and forth between the iPV4 and the Sigelei 150w. i am also open to using an unregulated box mod, although i don't have much knowledge of those - specifically the difference between parallel and series.
on one hand i like the idea of having the ability to run temperature control, although i don't know how much i would really use it. i also like the aesthetic look of the sigelei 150w.
who owns one of, or both, of these devices? which do you prefer? what box mod would you suggest instead of these?
price range, below $200 is ideal.
cheers!
So weird question. On my 18650 Paragon I do not have a dry hit problem on my Mutation, but on my 18650 Parallel Dimitri box, after 2-3 hits, with smacked wick it is dry. I have a problem with my switch on my Dimitri where the voltage sometimes is not constant.
I'm thinking somehow this may be the problem, but any help is really appreciated.
Thanks
Hey Guys,
I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.
To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.
I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.
I still do have a few questions I was hoping an experienced Mech user could help me answer:
- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.
- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.
- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.
- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?
- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.
- Any other tips you could throw my way would be great!
Thanks in advance!
So I've been vaping now for almost 5 months. I own 4 different regulated mods, many sub ohm tanks and a few rda's. I'm wanting to pick up a mech mod, but not sure which would be better. I'm pretty much looking at either the nemesis clone or the stingray x clone. Any thoughts on which is better, or any other mechs that I may want to look into?
I like my mechanical mods and my boxes, but lately I've really been wanting a regulated mod. I'm really wanting the Sigeli 150. Where would you order it from? I usually buy my stuff from local shops, but they're quite overpriced compared to online. Would love to have some input on online retailers with great reputations. Thank you!
Hello everyone. I have a problem. I'm gonna need some help to get through this, I may not even make it. Who knows?
I'm addicted. Not the good kind. The kind that costs money... The kind that makes my long hours at work perish with the swipe of my debit card... I'm addicted to.. Upgrading.
So I'm in need some some help from the best of the best with you guys. I'm looking to upgrade! I'm currently looking into going from my istick50w and Subtank Mini, to a mech mod and rda. I'm gonna start my way with single coil builds, and go up to dual. I am thinking I have about $100 I want to work with, so can someone make some recommendations?!
I already have some cotton and kanthal from my rba with the subtank. I'm just looking for a good starter mech and battery set up, with a pretty decent rda. Now, since this is my first, I'm not biased at all against clones. I welcome them! As long as they are decent quality and get the job done, so be it!
But here's one catch: I don't really like shiny stuff, oddly enough. I mean brass, or really shiny silver. I don't like scratches that stuff seem to get in my pocket. I love stuff to look perfect all the time!
So any help or recommendations are greatly appreciated! I have no idea about batteries or their chargers, but I'm more than willing to educate myself.
I just got a stingray. My first mech mod. I just want to know how to tell the difference between an authentic and a clone
I drip, I sub ohm tanks, etc. I've been running most of my RDAs & tanks on the Istick 50 & it's great (actually thinking of buying another).
But, now I'm wanting to buy an Arctic tank (I love a warm Vape, good flavor & chuck Vape). I was told that I need a mod that not only could push 70+watts, but 1 that has temp control. Should I buy the Cloupor T8 or are there other options I might like? Any help & suggestions would be greatly appreciated.
Hello,
I own the SMOK Infinix for more than 3 months now. I change the cotton myself for the pod and started having issues with the device.
After 2 months it would fire a while after pulling. Fixed by cleaning the inside of the device and removing the paper cover on the sensor. Worked perfectly.
Now, few days ago, I noticed I had to pull harder for the device to activate.
And now, literally an hour ago it would stop pulling. Isolated the airflow for a tighter pull worked for couple of minutes, now it just stopped. After some blows from the charging port it would do the infinite firing bug and that's the only way I can get a hit. Please help.
P.s I did clean the inside of the device again as much as I could. It gets a really good connection, just won't fire.
Hey guys, new to the forum, new to vaping, second thread. I have a few questions pertaining to mod clone companies, a-mod (wotofo?), infinite, tobeco. Im wanting to get a magma clone, I have a local vape shop and they sell them on sale as of this moment for $15, its made by tobeco though, are they a reputable company, do they make good things? From what I can see everyone seems to say really good things about infinite, but are these others good? They also have a Sir Lancelot copper mech mod for $30 made my a-mod, not tobeco. I wanted to go and pick these items up today, but with a little insight, any help would be appreciated, thanks!
EDIT: Yes I realize Im talking about two specific products here, that being the RDA and a mech mod, but Im really just curious about the quality and whether or not these other clone companies are reputable, so I made the decision to post this thread in 'Gerneral Vaping Discussion'.
-Links-
Mech Mod - https://kcvapespot.com/product/sir-lancelot-copper-clone/
Magma RDA- https://kcvapespot.com/product/magma-rda/