Not Enough Vapor

Hey Guys,

I have been learning the ropes of RDA vaping, and so far I absolutely love it! As the title states I’m wondering what coils (FC, Aliens, etc) Would be best for flavor and vapor output? I’m currently running some Wotofo 0.33 Fused Claptons (~0.17 in dual coil) @ 60 Watts. The flavor and vapor is ok, But I’m looking for a little more. Maybe something I could run at a slightly higher wattage and get more vapor / flavor?

Any help would be greatly appreciated!

Thanks!  

I'm having a mad time trying to find a tank or clearo to fit a relatively small battery to upgrade from my triton without having to go to a MOD set-up I need a nice drip-tip too.It seems like an in between of my Triton tank and a MOD I can't quite find the vapor production I'm looking for I lowered my ohms on the triton 1.8 it did produce a bit more vapor but the tanks just aren't built for those ohms and they run to hot.I've already gone through three coils.I looked at the Aspire Nautilus mini premium kit not completely sold on it, eGo One battery with Nautilus mini but I think the tank I'm looking for should hold more e-liquid.Any help here much appreciated.  

I'm tired of hitting the 10sec cut off time and still craving more vapor (per hit).

(Rather than just taking another hit) I want to maximize the amount of vapor per second per hit to achieve this.

I have my lemo tank opened up all the way which allows for maximum airflow.

Is it true that more wraps (on my coil build) would create more vapor since it's more surface area of saturated wick?

That coupled with more wattage would burn it hotter, also creating more vapor.

And using a gauge like 24 would help keep the ohms down, which in turn would allow for faster coil heat up time/temp to produce vapor quicker to maximize vapor per second?

Please let me know if these steps will yield more vapor per second or just send me on a different direction / adjust my ideas to allow me to obtain my desire.

Thanks ECF!  

so i got this used iclear 30s from a friend for like 5 bucks he didnt want it anymore, and i filled it up and let it sit to soak the coils and now that i tarted using it, its barely giving any vapor, takes like 3 seconds to even heat up, and heres the weird part, i am vaping it at 20 watts with no burnt taste ... im not very knowledgable about tanks but im pretty sure at 20 watts that .... should be burning the hell out of my throat? How come it takes so long to heat up, gives no vapor, and im able to vape a t 20 watts??? is their any way to do something to fix it without buying a new coil?  

Hi guys,

Is it really normal for an atomizer to get hot especially when using dual coils?
I just created a dual coil a couple of minutes ago using 24 gauge kanthal wire, 10 wraps each on a 2.4mm precision screw driver. My meter shows that the resistance is at 0.4 ohms, being curious and all since this is the first time that I made a dual coil, i decided to test it out.
Got some good flavor and vapor, though the vapor is warmer than I would want it to be ( I prefer cold vapor)

After taking a couple of 5 secs drag, I notice that my atomizer became hot, not warm, but hot. Is this something that I should be concerned about? I am doing something wrong or have I done something wrong when creating my coils?
Please help.

Here are some pictures of my device and atomizer. ( Philbox wood mod running on 2 pcs of AWT 18650 2600mah battery, my atty is Haze by vapehead origins)


 

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks  

I'm new to vaping. I've went through 3 coils barely using them.


My issue is: When I first install the new coil and add the liquid, it produces vaporizes just fine. It seems like when I set it down for an hour or so, and go back, it still produces good vapor. But after a bit, if I set it down after vaping, and go back, it produced no vapor no matter how much I puff it. It seems like if I unscrew the part where the coil is, and run it under water, and then let it dry, and replace it, then add e juice, it'll start producing vapor again. But it seems like as soon as I set it down for a bit, and pick it back up, there's no vapor and I wash it out again, etc then it works, but eventually just stops producing vapor altogether u til I replace the coil.

What's going on here? am I doing something wrong? Do I need to adjust the coil some how? I've bought brand new coils and barely use them and this happens. Is the coil just getting gummed up? The coils don't make vapor after so long, and the usage doesn't even equate to a full day, maybe an hour or so.  

Trying to find my happy place.......

I have been playing around with ohms and watts more since I got into rebuilding and have found sub ohming changes the flavors too much for me and the throat hit gets a bit harsh.

Tootle puffing does not satisfy my need for thick rich vapor.

Still looking for my version of perfection. I have gotten close with a few higher ohm builds that still get pretty good vapor production, but I just haven't gotten my vape nirvana yet.

Maybe I need to meditate over my builds?  

I rebuilt a new coil 1.4 ohms. I am having this issue even with 1.2 ohms I have a 20 watt istick. So I know a lot of people have this harsh hit (not dry just hot) and a longer drip tip solves the problem. But for some reason I am barely getting any vapor production even at a higher watt and open air flow. Anyone have ideas if I am too vague please ask away.  

How can I get more vapor production out of my Halo Triton?I lowered my ohms to 1.8 to 2.0 and bought a variable voltage battery...going up on voltage didn't help. What next?