Stuff I Was Tempted To Buy...

So i was thinking of starting a thread which might list every mod past and present which would be compiled by you from one day to the next. At first i thought it wouldn't be practical because no one would know if a mod had been added unless they read through the entire thread.

Then i thought if a list from A though Z were compiled systematically by members by copying and pasting the most recent list in this thread, and then contributing to it, ensuring your entries are inserted alphabetically (Even if it's only one or two mods), then eventually this thread could contain pretty much every mod that exists, and would be updated regularly, by you !. No pictures please !. Only brief descriptions such as "company name / name of mod / type of mod".

What better place for such a list than ECF, "The world's largest e-cigarette website.

Here's my contribution to start it off :


____________________________________________

Pioneer4you IPV 3 150 watt box mod (2 18650 batteries)

Pioneer4you IPV 4 100 watt box mod (2 18650 batteries)

Provape Provari V2.5 "Polished stainless steel" tube mod (1 18650 battery)

SIGELEI 100 watt Plus box mod (2 18650 batteries)

Smoant Charon TS 218 box mod (2 18650 batteries)

Tesla advanced vapourizer 6 volt -15 watt VV/VW Tube mod (single 18650 battery).

Vamo V7 40 watt tube mod (Single 18650 battery)

Voopoo Too 180 watt tc box mod (2 18650 batteries)

________________________________________


it's a list of all the mods i own at this present time.

If you're going to add to the list then you can add any mods you can think off as long as you place those mods into the existing alphabetical order ( description should start with the company name). Batteries such as, say, vision twist aren't mods so lets not get into those. Tube mods and box mods (Includes internal/built in battery mods) only please (Squonkers included)

And lets not forget Mechanicals.

If you think a previous desciption is incorrect then correct it.

Ensuring company names come first in your description will enable a logical, consistant "alphabetical" understanding of the list by anyone who views it.

If you don't know the name of the company who made the mod just insert the name of the mod etc.  

Most of the times I see people telling me about things weeks before release without any offcial info from the publishers , the subox is a good example , that thread opened a day or two before Kanger published the info . So my question is , where do you find all that stuff . My only way of searching wats new is going on fasttech and clicking new arrivals or going to kanger or eleafs sites . Those are the major comapnies that I know of , I dont really know that much else about others.  

No wonder they breed potential politicians at ebay. This is a snippet of the text contained in a email a friend of mine got over the weekend:

Due to strict government regulations, eBay doesn't allow the sale of most tobacco products. This includes cigarettes, cigars, herbal cigarettes, and smokeless tobacco. E-cigarettes also aren’t allowed on eBay. We realize e-cigarettes don’t contain tobacco. But due to a lack of globally consistent or clearly established regulations for the sale of these items, eBay has made the decision to not allow the sale of e-cigarettes or their components.

So, since its NOT regulated as of yet, they`ll regulate it for us??? And yet the "other stuff" paraphernalia runs rampant on ebay. That and other things you would`nt want to try and explain to your 6 year old. Like that knitted sweater for a pickle.
God Bless ebay, they`ll be the Vaping Heroes for us all and help make our decisions for us, cause we are just too slow to understand or comprehend the nature of our actions.
Also, you can buy ANY flavor of juice (especially the "other stuff" flavor) you want on ebay, as long as it is zero nic. But what are you going to vape it with? You can buy the juice, but you cant buy the vaporizer. HOW is this LOGIC agreeable to anyone?


The most scandalous entity on Ebay, is Ebay itself.  

"Cheap is small and not to steep, but best of all, cheap is cheap...
I'm on a low budget!
I'm on a low budget!
I'm not cheap, you'll understand;
I'm just a cut-price person in low-budget land"
--Ray Davies, "Low Budget"--

A few months ago, I got back into vaping after a two year absence. I figured that I wouldn't really need to buy much more gear than what I already had from 2014-2017.

Well, a lot that old gear still works and I use much of it frequently. I was using it, doing just fine, when I decided to get a new high power mod to replace the ailing eVic-VT, whose built-in battery is dying a slow and agonizing death. Can't run subohm coils on a Provari.

So I decided to buy a mod...

I'm good at finding closeouts, liquidations, etc. It's one of the ways I keep costs low for my guitar business. Much of which comes from China. With vaping, we have a whole industry located almost entirely in China. Most of the major manufacturers seem to introduce new gear and discontinue "old" gear on an almost weekly basis.

"Who still wants that old piece of junk mod we were making last month with a measly 95 watt output. Now, for just $5 more, you can have the new totally badass mod that looks almost the same as the old one, but in new colors and...get this...105 watt output!"

So for low power me, there was all kinds of cool stuff. I don't care about TC, 'cause I vape too cool for it to work. Just give me variable wattage or even VV. Last month's model is OK.

So I'm finding all sorts of cool stuff, and started seeing a lot of good stuff for under $50. A lot of good stuff under $35. Some really cool stuff for under $25...so of course I can buy that mod. Doesn't cost half as much as that carton of cigarettes that I didn't buy this week.

So here's a cool starter kit (mod with tank) for under $25. About half of the list price that nobody paid in the first place:


The Sigelei Sobra is a cool looking, long lasting, 200W monster. I love the Moonshot tank it came with. I added the heat sink all by myself. But it has a fatal flaw for tootle-puffing me. Minimum output is 10W! I frequently vape at 7W, so this setup just won't work for me all of the time.

So I really needed to get another mod, this time a high ouput device with a minimum output of no more than 5W...

I can't deny it--I quickly developed a bad case of low budget shinyitis. Not too hard to click on "Buy" when it's so cheap--such a good deal--and what's another $25, anyway? If it's less than $15, I swear, sometimes the "Add To Cart" button clicks itself.

Here's a bunch of low budget gear that looks cool, works well, and none of it cost more than $35. I also bought all of it in the last 3 months:
Low budget shinyitis is a common affliction. Some folks collect different pod systems in all of the available colors. Some folks just can't resist a good $20 RTA. Some people start collecting mech clones...
HCigar "Turtle Ship" clone with a custom built Subtank. Good quality, really. The only thing that gives it away as a clone is the engraving, which was left rough. Of course, I sanded and polished it, and now it's much smoother.

So low budget shinyitis is real, it's dangerous (to your wallet), and is perhaps a far more widespread affliction than previously thought. Now somebody please show off your low budget (under $50) shinies, so I know I'm not alone!  

So I always like to keep my stuff nice and shiny but when I clean the devices I sometimes notice some green stuff around the thread connections on both my vaporizer and the tank. I would take pictures but I just cleaned them off and thought to post a question AFTER (yeah I'm a smart one). It's easy to clean, just a qtip or paper towel, both dry, and it comes right off. Is this normal?  

I hope I am posting this in the correct place.

Up til this year I have run mainly utilitarian stuff and it’s served me well, I have to say. I have however been looking at some of the rather beautiful stabwood mods folk on here have, and am considering one, especially now I have found a custom maker up by Loch Fyne near to my other house in the West of Scotland.

I have a few questions which I hope members can help with.

Do you use them when you are out and about as daily drivers, or do they need special care so you only use them at home?

I had a hand made wooden squonk mod a few years ago and the wood didn’t stand up well to leaks or coming into contact with e liquid which eventually jammed up the fire button. As stab wood is made using a resin - is it impervious to this?

Is stabwood prone to cracking over time?
And finally with reference to the Pumper squonk mod - the bottle and pump system is proprietary so is it long lasting and does it have any common faults?

Many thanks in advance for any information you can offer.  

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

Has any one else noticed that most box mods are more or less about a 1$ per watt. This excludes high end stuff Dose it really cost 80 or a hundred dollars more to make a 200W box mod VS a 100W the YiHi up grade for free just a down load  

I have been on and off for a few years, mostly off because hubby says the smell of some of my favorite juices is annoying. Well a short stay of me in the hospital changed his mind and he does not seem to mind the vaping as much out of me.

I feel like I looked down for a second and when I looked back up there is all kind of new stuff out there, the aspire esp, eleaf, etc. I switched from the store bought auto to the ego style battery (I always go passthrough) and had gotten up to Kanger t2 and protank for various types of juice. I am a basic person, I might be interested in getting into some of those higher powered mods later (the vapor production looks insane) but I basically want to just throw the tank on a battery and go. I like replacing the atomizers and am not sure I would want to build my own and such. Of the new stuff that has come out since the protank hit (was it a year or so ago?) what would you recommend to a basic vaper? I noticed ALL the ego batteries were out of stock at gotvapes so that got me thinking maybe the ego style battery may be on its way out. I was browsing some other equipment and I was looking at the Kanger IPOW 2 but like I said, I would rather not fiddle and I do want something that is a passthrough as well.

I do realize there is a lot of variability, and the reason the more customization and adjustable stuff has come out is because everyone has different tastes, but I really would like to hear what everyone thinks for getting back into vaping.  

Hello Been vaping about 2 years now
My setups are Vaporshark Rdna 30 Istick 30 watt and a provari 2.5 and a IPv mini v2 30 watt
So like many others I have been juggling with wattage I currently Use A couple of kanger subtank minis using the RBA and a kayfun v4 I've been all over the place building ohms but have settled on 1.2 - 1.4 ohms BTW I'm not into sub ohms
So after many months of different ohms and watts with the help of steam engine I have found I like my vape at a heat flux of around 175 so to get to this and I can't believe how simple it was I just take the ohms I am using such as 1.2 @ 12 watts = 178 heat flux 1.3 @ 13 watts = 178 heat flux and so on I can't believe it became that simple
So I suppose all it takes is to find what heat flux you enjoy and adjust from there
I never bought that what I have read thru the last 2 years that 14 watts is 14 watts no matter what ohms you use it seems to me there had to be more factors involved
Just my thoughts


Sent from my iPhone using Tapatalk