So here's my question. First I'll start with some background to hopefully avoid questions in the future. I've been vaping for about 3 months. I have a eleaf 30w, that I usually use a nautilus/ atlantis tank on. I also have a sigelei 150w, that I use a plume veil and dark horse on. So my question is that I really like the cool vape that I get with the eleaf on my tanks. I have been tinkering with the the 150 w/ the dark horse and I finally think I found a build that gives me that same feeling. I would like to know thoughts on if the M80 would assist me in accomplishing this further on my builds with the TC.
Hello im looking for a RDA, I have had a shop around and I have narrowed it down to a few, the tobh atty, plume veil, magma and the dark horse dripper. I am more leaning towards the tobh atty as personally it looks the more simple to build on. I will be trying to build .5 ohm coils as that's what im using at the moment (aspire Atlantis) could you give me any advice/recommendations
It's me again Margaret!
I've been gone for awhile due to a new job and new hours, not enough free time but i'm back.
I started on an Ego-T, and a tank you couldn't tilt over without spilling juice.
Since November, I have dove head first into the deepest realms of vaping.
Now I vape using a Sigelei 150w set on 80w usually on .4-.6 builds, dual, single, quad, parallel, twisted, ranging on a few different RDA's, (Authentic Pollux, Dark Horse, Little Boy, Magma, Doge, and Enigma).
If I get 10 replies, with pictures of your vape box or vape collection, I will post mine!
I want this to catch on!
LET ME SHOW YOU WHAT I HAVE SPENT ALL MY SAVED CIGARETTE MONEY ON!!!!!
SHOW ME YOUR VAPE COLLECTION!!!!!
Hi all
Couldn't find the topic on VW mods
so I thought I'd post my question here..
I have two IPV4's that have been great running kanthel builds in the power mode,
but I really don't see a difference running the NI200 Atlantis coils in joules mode using the Temperature Control feature of the IPV4..In fact I get a burnt taste in the Atlantis after vaping a tank of juice running the .12 ohm NI200 coil from Vapor Shark..
Now the mod hits great with the kanthel coils in the Starre and Herkakes sub tanks and is great with the .2 ohm kanthel build in the Dark horse at 65w (power mode) but so far TC has been a real disappointment for me
sent from my XT1080 via Tapatalk
Been building my vape hardware collection lately and at at the point where I wouldn't mind another good subtank, but it must have an RBA with it. Gotta be able to rebuild it! hah
My current lineup includes a Subtank Mini on the XPro M80 Plus, a 30w iStick, Doge, Dark Horse (by FAR my favorite RDA I've had or tried), and a Hades Mech. All decent stuff but I'd like to have another tank for my collection. What's a good (and decently priced) tank to go with my Subtank? I'll say this, I've tried the Atlantis and didn't care for it so don't suggest that. Any other suggestions?
Finally got fed up with my subtank dry hits, and the cost of my nautilus coils so I decided to dig out my mutation and dark horse a couple weeks ago. Now I fear that I ruined tanks forever!! I don't remember being this happy with dripping last go around. After a weeks and a half of dripping I tried my tanks again and they just leave me wholly unsatisfied.... Is it a lost cause?? Have a ruined tanking!!
Hello ecf, i recently bought a sigelei 150w and an atlantis v2 subtank (amazing btw). I was outside vaping and a very kind gentlemen came up to me and asked me some questions about vaping. He told me he wants to quit cigs. We were both waiting for the bus so i thought yeah i dont mind. He starts asking me pretty common questions; is vaping safe, do i actually save money, etc. He then asked me a question i havent heard before. He asked me if its worse than cigarettes or if i get more nicotine because of the amount of vapor i was blowing out. (.3 at 85watts pretty big clouds) I've never heard this question before and was wondering if anyone has, or if they know the answer. TIA
The question is.. Is it possible? Do you believe the sub ohm tanks in today's market could possibly hold a candle to the insane Rdas of the market today such as the dark horse or the doge v2? If not in their stock form then in what way could one modify it too hold a candle in a cloud chasing competition
So I just picked up the Atlantis 2 today and I have a few questions/concerns.
First off:
What is a good wattage range for the .3 ohm coils ? Im guessing somewhere between 40-70w
Does it have a weird brake in period ? Because it's not producing very much vapor at all...
I put a 3mg juice in the tank and it's hitting like a 8mg or 10mg which is weird.
Anyone else having problems with it ? I'm using it on a 150w Sigelei
I used to be one of those who thought the whole dripping thing was dumb.
After getting tired of buying coils for my atlantis, I decided to pop in to the store and pick up my first RDA.
I settled on the dark horse. I watched a short tutorial on youtube and built my first coil at 0.6 ohms.
Safe to say the atlantis and nautilis will go into retirement today.
I have never felt a nic buzz from vaping, but I can actually feel a buzz off this thing : I vape my atlantis at 3mg.
Also I love that I simply have to re wick and drip to try new flavours, and best of all NO MORE BUYING COILS.
Hello. I'm currently using an Eleaf iTwist Mega with a Tabac BCC clearomizer and using Kanger T3 2.2 or 2.5 ohms resistances. I used an Evic mod before but it broke.
Basically a lot of times I use this setup I get the gurgling sounds and also the airflow holes must be cleaned often.
I'm thinking of upgrading and here's some of my vaping preferences: main thing - strong TH. I prefer the mouth-to-lung vaping technique. The more vapor the better. Also, prefer using tanks that are not using dripping technique (so I must change the liquid very fast).
I went to a store and the guy there really recommended the Eleaf 50W mod, however, from what I've read from some posts, not a lot of people vape at that high of a power anyways, so there could be the Eleaf 30W or 20W options then(?) - basically if the mod can last a full day I'm good with that.
As for the clearomizer/atomizer I'm not sure which to choose. I see the eLeaf Mega being recommended, the Nautilus as well - but which one can support the best resistances?
Also, not sure about the value of resistances I should use after the upgrade: can the non-drip tanks handle sub-ohm? Is it worth it if they do? Thanks.