Pg With Sub Tank?

Hey guys,

I'm looking for a tank and battery combo that subohm at . 5 but the tank has absolutely no juice spit back. I do know my atlantis and atlantis v2 have tiny droplets of juice that hit the tounge. So small that I don't notice it until I had someone point it out to me. I run 70pg, 30vg juice.

I'm looking for a setup for a friend with a tank that is small like the atlantis v1 or subtank mini with a small frame mod.

They currently have a I stick 30 so ideally I'd like a tank that works with that.

I will say thru personal testing the atlantis v2 will give me absolutely no spit back at 50 watts, but the I stick 30 cannot get to 50 watts.

If a new mod is needed, they will go with the new Kanger 50 box but my big concern is spit back. I'm talking I need a tank that has no spit back.

I'm looking at doing this in the smallest package I can. Ml capacity isn't a issue. Size and weight is the issue here too.

Rba tanks are out of question. Need something with replacement wicks.

Any ideas?

Sent from my LGMS395 using Tapatalk  

I have the Smok xPro M80 plus and I have a couple Kanger subtank minis I use with it. I usually use .5 ohm coils. Sometimes it will show the ohms fairly correctly at .54 or even .61, which seems close enough. However, as I puff, the ohms reading will tend to change after every few puffs. Sometimes it will even say up to 1.5 or 2.0 ohms on the same tank coil! One tank seems to do it worse than the other, but the two I use now both will change quite often, and once in awhile quite drastically. It sometimes helps if I unscrew the tank and screw it back on, but if it isn't really tight, the ohms read are really far off from what they should be. I'm not sure if it is the tanks or the M80 plus that has the problem. When it reads really high, if I don't catch it before I take a puff, it is horrible and burny-dry, since it thinks the ohms are so high...

Has anyone else had this problem and/or have any ideas as to how it can be fixed??

By the way, I've cleaned the connections and everything thoroughly, so it's not that...  

Hey guys this is my e-cig: Zen Pen Electronic Cigarette Kit
I was wondering if the iSub Tank would fit on this? Also is this a good upgrade from the CE4? Any good websites to order from? Also wondering if this tank will crack for some juices as well as if I would have to replace this or the coils like I change my CE4 pretty often. If this tank wouldn't work any other good tanks that will last long and are fairly inexpensive? Thanks!  

When I go to take a puff on my aspire tank, it shoots out a little drop of heated juice. Only right when I hit the button on the battery. Only way to describe it is that it looks like a shooting ember coming out of the mouth piece.

I'm afraid one day it will hit me in the eye or someone else. What is causing this?

Thanks.  

Hi friends. It's been awhile since I posted a thread and thought this might be a fun topic. I will go first. There are a couple things I really look foward to regarding my vaping. The first thing is when I get a new RBA. I can't wait to get in and build that new tank. I track the package and it's like Christmas when it arrives. The second thing is if I order a new juice! I usually make my own juice but I will also buy a couple each month. Oh I can't wait to break into that new bottle of juice!! Those are a few of my favorite things. How about you??  

I am vaping very airy mtl but lately a lot restricted direct lung on a hellvape md with a small Clapton coil 30/40 7wraps or something ...at 23watts and with a full tank 4ml I get like 100puffs if I do direct lung like 3-4 seconds each puff...

Ok I know depends the time of Puffs and how much someone vapes and all that but I was wondering....

I was thinking to buy a zeus x rta and get also the mesh deck to have both...
The thing is I wonder since my hellvape eats Soo fast the juice ....
How will zeus with dual coil be...or the mesh with 4ml tank???

Anyone using it and how many times u refill per day hahaha must be a lot isn't it??
Maybe I should buy another rta with larger capacity??? XD  

Because of some changes to my income and the snap program in my state, i have decided it's finally time to stop smoking, or at least stop cigarettes. I have an EVOD with a nice glass tank (aspire,) my issue is that i have nasal polyps and they stop my sense of smell. So i have never been able taste the liquid, no matter what mixture i use. Because of that i have always preferred the cigarettes. I like the e cig and all but if given the choice, because of the lack of flavor i would always grab a cigarette before the ecig.

So now i cant afford to keep smoking so i have trying to figure out why i prefer them so much, and one of the biggest ones as far as i can tell is the weight. With a cigarette you can hold it between your fingers and still use your hands, With the e-cig, it's heavy i have to puff and put it down before i can really do anything.

Now because of my taste issues and experimenting, i have 10 bottles of liquid just sitting here that i have pretty much never opened. If i could finish off that stuff it would save me about 120 dollars a month. For me (and i assume a lot of other people) That's a hell of a lot of money.

So what i am trying to figure out is, is there a really light weight e cig out there? Maybe a style that mimics the Blue or other cartridge e-cigs but still allows for refilling? Almost all of my liquid has citrus in it so it would need be glass but it seems like that would still be better then what i have now.

Also cost is an issue. It would have be on the cheaper side of things if possible.

Thanks  

I am considering a stainless tank for their looks and durability. I have a phobia because I have never been able to not break anything made from glass, including pyrex. I tend to be kind of rough with my gear, and always prefer the most durable option. I'll probably drop it onto the tile floor, or concrete. It would render my tankomizer unusable, as well as wasting the e-liquid. Then, I'd be worried someone's pet would come and lick up all that poisonous nicotine and get sick, so I'd have to carry paper-towels around with me or something.

Is there a neat trick to gauging the e-liquid levels in the steel tanks, or is it always just a guessing game? Do you use time as a fuel gauge? Like, knowing how much juice you go through in an hour, then do math?

Is there some sort of magical electronic device that you hold up against the tank to read its levels? Or how about some special tiny floating magnets that surf the e-juice, then you see where a screwdriver sticks to the outside? I'm being facetious, of course. I'm just wondering if someone knows some cool trick, or if it's just unscrew it and peer into it: old school.

I did order an Aspire tank that is a neat looking stainless cage around the pyrex, which might be the best of both worlds, but I'll probably still break it.

Then there are those like the Joyetech Delta II with little slits for a sight-glass, but I think I want a KayFun with no window.  

I've been at this since 2009 and I've been a die hard MTL-er. I recently decided I wanna try sub ohming. I picked up an Innokin Isub B because it works at lower wattages. I picked up some 3mg juice (i usually vape 12mg). When i vape the Isub i get a bit dizzy feeling. I know this is normal at first, but I was wondering how long it will take to get used to the sub ohm setup. Anyone else gone through this? Thanks in advance for your advice or tips.  

I always get juice from juice Mafia, my local brand..... well this time I got 100% vg no nic juice in Arctic Ice because I got my girl a new tank to use as an e-hooka. The strange thing is the juice is crystallizing both in the bottle and in the tank. It also is getting really cloudy, but if I leave it say in the sun warmed window of my car the crystals seem to melt back into juice. Anyone know what's going on with this??