Does anyone know where I can buy a 26650 Orchid V4? I prefer a US vendor just because of the overseas shipping prices.
Thanks in advance!
Just recently purchased a Orchid V4 and loving it so far.
Though the Orchid uses two coils.
Considering adding a Kayfun to my modest collection.
My understanding that the Kayfun uses a single coil.
That being said, does it still vape as good as a Orchid V4?
Im sure theirs members here who can give first hand info on these two?
May like to share pictures?
And builds, methinks 28g is best.
Though I may try some 24g.
Running 28g ten wraps, .9 ohms.
21watts seem to be my sweet spot.
Just wanted to pick your mind on these.
Jim
Has anyone ever heard of or used one? I'm looking at a 26650 parallel box mod. Any other recommendations for a 26650 box mod that don't cost a fortune?
Dual 26650 Box Mods & More - Lifetime Warranty | Dual 26650 Box Mod *Parallel*
My buddy wanted me to show him how to wrap up some coils. Hes using a vamo v5 and he bought an orchid v3. He doesnt like harsh draws but rather a smooth, light, cool pull. So i decided to try that standard wire that comes in the orchid v3's package. Its that stock, hair thin wire that comes in the box with most of your typical RDA's RTA's, but i cant figure out the gauge dimension on it. Im trying to get him a whole roll of it so he can wrap his own. If you guys can help me out i would appreciate it. Thanks!
Hi all, just got home from work and my new Orchid V4 was here waiting on me.
Kinda excited ok, thing is I started building coils for it using 28g wire.
Here the problem, I cant seem to loosen up the four screws on the post.
Are these normal threads or reverse threads?
Cant install new coils till I can loosen up those freaking screws lol.
Thanks, normally I never have such problems.
Jim
im looking for a new mod budget (50ish dollars) would this $47.37 ATHENA Smart-60PB VW Variable Wattage APV Box Mod - 5-60W / 1*26650 / aluminum / black at FastTech - Worldwide Free Shipping be good, and do i need to get any batteries for that i currently have 2x of 18650 batteries
Okay, so i'm a dripper...... I only tried one RTA and it was an orchid. I don't like using it a lot because it is a "pressurized" tank, so if I take the top off to fill the tank and tighten it down, it pushes the juice out of the airflow holes. I HATE FILLING IT FROM THE BOTTOM HOLE!!!!!!! It takes 2 freaking years to fill it up and ain't nobody in my line of work got time for that!
Does anyone have a recommendation for an RTA that I can fill from the top easily, that IS an RTA. I will never buy a coil at a store, I prefer to make my own. Yes I test, Yes I sub-ohm, Yes I know all about battery safety, I just know absolutely nothing about RTA's.
Needs:
"Airy" airflow option. Can be adjustable but not necessary.
Top Fill
Single OR Dual option
AAAAAAAANNNNNNNNNNNNDDDDDDDDDDD......... GO.
Just look at this pic :
I will probably do that to mine too . Im pretty sure this is will be better than the orig RBA . So why do you think RTAs dont have that , RTAs like the Subtank , Lemo , Orchid etc. , even kayfuns ?
It's my bedtime but I would like to leave a question with you.
Which of these two would you go for? This authentic Lemo or this Orchid clone? They both have good reviews but I would like to pick your brain about it... because I trust you more... so there!
I'm hoping to get some answers to read over my coffee tomorrow morning.
Thanks and goodnight from the sunny island.
The one thing i still have trouble with in my vape shopping is finding nice drip tips. Most unfortunately I live out in the 'burbs where there are no vape shops, let alone one with a large selection of drip tips that I can try on my RBAs live. I haven't found many vendors with what I would call a "great" selection of DTs, vapordna being one of them. I'm willing to pay a little extra to get a quality DT, I find it makes that bit of difference that can take a good set up and make it great. The few times I have ordered DTs from FT I found that I don't really end up using them either because they don't fit quite right, don't feel quite right, or suffer from lower quality in build and/or materials. The best luck I've had has been with vapordna's premium tip section but I know there are tips out there which are just as good at a far cheaper price. So I posit the question ... where do you get your tips?
Specifically I was recently at a B&M a few cities over looking at an HCigar Orchid clone and while I didn't care for the Orchid I loved the DT, I just couldn't justify buying an atty I'll never use just for the DT ... I don't like to collect things like that. It was a fat medium length SS tip with a delrin base/core and 2 O-rings. It fit like a glove in my SQR which I find has the most precise 510 drip bore of any of my toppers, which shouldn't come as any surprise since the SQR is Swiss
If you had $450 to spend on vaping equipment, what would you buy?
Currently have an authentic Hana Modz V3 - Plume Veil - Little Boy - Tugboat V1- Kayfun Lite - Boss 26650
Vaping⚓Sailor