Ipv4 Wraps Now Available

I have an iPV Mini that the finish is starting to look a little bad in certain areas on the mod.

I am going to cover it with a vinyl wrap, but can't decide what to buy.

Pricewise, the J-Wrap and Vapor Skinz are at least double the price or more than the wraps you can buy off of Ebay from companies such as "MightySkinsDecals1"

Are these Ebay wraps in the $7.00 - $8.00 price range of much poorer quality than the expensive J-Wraps, Vapor Skinz, etc?

Thanks,  

Hey all finally made the move to rda I am loving the flavor and hits I get. I got a tub boat clone and a mutation x v4 love them both . It was suggested by the vape shop to upgrade to a stronger box. I have a eleaf 50w . I would like to upgrade but not sure witch way to go . Is there anything new comeing out I should wait for or just get a ipv4 or ipv3 because it is 150 watt or go for the sigelei or any other suggestions thanx in advance  

So I'm looking into buying a temp controlled mod for my next purchase. Ideally, I would be getting the VaporFlask with the DNA40 board. Problem is, I dont have $300 usd to drop on it. Sooo....

I was thinking about the FT clone, and was about 3 clicks away from making the purchase when a friend tells me about the IPV4 pre-order over on the bay. The DNA40 has temp control and goes up to 40 watts (duh) but from what I have read, the IPV4 also has temp control and goes up to 100 watts. I'll never use all 100 watts BUT sometimes will vape above 40 watts. I like that both are dual 18650 and have the temp control function (I'm dying to play with some nickel wire) I'd really like some opinions

Any thoughts on the VaporFlask clones from FT? Would it be worth it for me to wait for the IPV4?

Cheers ECF!  

Hi all
Couldn't find the topic on VW mods
so I thought I'd post my question here..
I have two IPV4's that have been great running kanthel builds in the power mode,
but I really don't see a difference running the NI200 Atlantis coils in joules mode using the Temperature Control feature of the IPV4..In fact I get a burnt taste in the Atlantis after vaping a tank of juice running the .12 ohm NI200 coil from Vapor Shark..
Now the mod hits great with the kanthel coils in the Starre and Herkakes sub tanks and is great with the .2 ohm kanthel build in the Dark horse at 65w (power mode) but so far TC has been a real disappointment for me

sent from my XT1080 via Tapatalk  

Hello everyone, I feel like I should post this in the Beginner's Thread. I bought an IPV4 today and it is my first temp control, non-built-in battery mod. I need help! LOL like with everything. I tell you my gear. The IPV4 of course, a Nitecore D2 charger, a pair of Imeren 18650 batteries, 5 Kanger OCC nickel coils and 2 .3 Atlantis coils. Along with an Atlantis V1 and pair of Kanger subtanks. Now I know, some of you are probably thinking people like me shouldn't have temp control but please humor me I want to learn.
Basically my first question is where do I start? How do I get to temp control on this mod? Where should I set it for these Nickel coils? Should I leave it at the same setting for regular coils? How do I get to joules? Where should I set those? Ok, let's just start with that. Is there a place online I can get a tutorial?
Sorry to be like a kid trying to learn to ride a bike, but as anyone that owns one of these things knows, the instructions don't say much. Thank you all for any help given, I know there are some real pros here.  

Any websites that still have pre orders for the black ipv4?  

Hi all first off like to say thanx to everyone who answers my newbie question. You guys been alot of help. My vapeing knowledge is improving. Now I have another one for you guys . I am looking to get the most flavor out of my vapes. I own a ipv4 a mutilation x v4 a tugboat and kanger submini and a eleaf 50 watt. I have 26g kanthal 24g kantal . What is any should I get for more flavor . What kinda build should I do ? How many wraps? Please give me a full Break down on the way to get best flavor possible . Juice with more vg I am so new and lost thanx in advance  

When calculating builds on Steam Engine for parallel builds, is the wrap count the total of wraps counting each strand, or total wraps for the unit of strands?

Example: I want build X using 2 parallel strands of 28g Kanthal, and for my given resistance, SE says use 14 wraps. Is that 7 wraps with parallel wires, or 14 wraps counting the parallel wires as a single wire?

Thanks in advance, guys. I'm trying to experiment with some creative builds and I want to waste as little wire as I can on missed resistance.  

Ok, so I may have gone a little overboard this time and I usually don't think that of course until I'm already done. So I'm posting here to cleanse my vapor soul with those I know will understand lol. When I drop nicotine, I reward myself with upgrading vape gear. Luckily I started at 12. I went to 10 I got a new battery. Went to 8 and got an Aerotank. Went to 6 and got a pair of Subtanks, an MVP 3 and an iStick 50. Notice a growing trend here? Well this time, I went to 3 and ordered the MVP 3 pro kit with the glass iSub. 70 bucks. Ok, well I got antsy waiting on it and got a bonus at work. LOL So I went and got an IPV4. So now I have the MVP 3 Pro with the iSub g and and an IPV4. And I love them both!! I haven't decided yet whether I will sell my older mods or not, they all still serve a purpose somewhere. So that's my confession. Anyone else have any to get off their chest?  

I'm a newbie here and the question that I have is does the TC on this mod only work if your using nickel?