I've already done it, but was just making sure it was ok. I tend to mix down my liquids quite a bit, adding VG into an 18mg base to end up with a 6mg blend with light taste. I do that for my All day vaping, so I don't overpower my taste buds. The problem is, the last two colors I got were colorless, so it was hard to tell which bottle I picked up or was in which tank.
So, I came up with the idea... put one drop of food coloring in one bottle (30ml). I chose blue. I filled 1/3rd with my juice choice, filled the rest of the bottle with VG, and added one drop of blue food coloring. One drop went a long way and turned it quite blue.
Besides coloring the cotton, is there any adverse affects of doing this? I don't think one drop of food coloring over a half a weeks time to vape the bottle is enough to worry, but I just wanted to run across this to you guys. I know it will discolor the cotton, but I rewick it myself anyways. I color it for identification, so there is a reason to do it, and It seems it's easier to tell the liquid level as well. It doesn't color the vape or my mouth, but the only thing I'd be afraid of, is if ejuice leaked, it would dye whatever it got on.
Any input?
How would I be able to tell if my drop tip is getting juice in my mouth? I vape 6 nicotine. Would there be a certain taste? the reason I ask is because juice us always in my drop tip. I don't think its getting in my mouth lol I just want to make sure. thanks
Sooo last weeks I was able to wick my atty in a way that for me it's perfect...no dry hits no leaks or flooding or anything and I enjoy Soo much...
After vaping some strawberry cookies and chocolate....(very dark juice coil abuser) it was rewicking time...
Put fresh cotton and start vaping and dammm bad taste....dry hit
Tried make it work...nothing...
Ok let's rewick...again same dry hit
Not anything crazy but just that light dry hit bad taste....
After rewicking 3times and using almost no cotton hahaha I was like ...... Cant dry hit now
TURNS OUT IS WAS A JUICE I BOUGHT ALREADY MADE...WAS CUSTARD CARAMEL AND SOME CEREAL STUFF TOGETHER OR SOMETHING
THIS THING TASTES LIKE DRY HITS!!!
WHAAAAAAAAAAAAAA not exactly same taste but was very similar EWWWWWWW
I AM SUCH A NOOOOOOOOOB
anyways that's all....I make my own juice just forget my bottle and I was at work so I bought a juice from a store nearby
Hey Guys,
I recently bought a new ecig (Joyetech eroll-c) and got a bottle of menthol liquid with it which I loved and the ecig performance was spectacular!
Traditionally I had used a Halo G6 and there liquids.
Now I've run out of poor menthol and going back to Halo liquids I've noticed that they instantly give me a headache even smoking a light 6mg nicotine bottle of Tribeca!
Could it be the blend and does anyone have these headaches with Halo or another brand?
I have a smok pen 22, I have been using smoozie Maui Waui e liquid. I have to either wait a while for the juice to soak every few long hits or I have to drop some juice down the top. I tried loosening the cap different amounts it doesn't seem to help, some people said it would. I'm not sure if I need to use different E-liquid like a clear one or what, but I hate having to wait in between hits especially if I already filled the vape with juice. I tried priming the coil when I first got it there was no good there.
Just curious how you guys go about vaping through your juice bottles. I buy 30 ml bottles usually. I have a few tanks and dedicate a specific bottle to each tank. I make myself finish off a bottle before I go onto my next juices. If I decide to put a half bottle away and try a new flavor, I'd have a bunch of half bottles laying around and it would annoy the hell out of me.
I have a couple 60 mils on the way though, so I suppose I wouldn't mind stashing those halfway through. I suppose it could be way different for people that drip though.
Hi,
I just bought a litre of 100mg/ml unflavoured PG E juice.
I calculated that if it doesn't go off it should last me 10 years. It came in a sealed plastic bottle.
I bought a dark amber glass bottle (which I have sterilized) to put it in but I was wondering if it would be better to leave it in the original sealed plastic bottle rather than breaking the seal to put it in the glass bottle? I took the lid off and it has a proper seal over the rim of the bottle like a Gatorade.
Also the glass bottle I bought came with a plastic lid but I doubt it will be 100% airtight.
Thanks for your advice, any other tips would be much appreciated.
I bought 2 bottles of PG and both have a bitter - sour taste. They are clear and odorless but When I put a drop on my tongue I must say it tasted very bad.
Which PG is best to buy without such a bad taste ?
I bought my bottles from Amazon.
I am tempted to buy a bottle of PG from essential Depot - Has someone tried this brand ?
Regards
Did you guys know that you are supposed to be shaking your bottle of e-liquid? I just read that on my bottle of Loaded Strawberry Jelly Donut.
I have never been doing things and well. I am going to start doing it to see if the flavor gets any better.
Hi, despite all the info on the internet these days, I ve been unable to find an answer to what is the life use of a wire on a rta coil (not the cotton or liquids) before it gets exhausted and become a bad element to health, maybe to the point of releasing metal particles that could go into the lungs... I know this is highly relative and depends on what kind of wire, liquids and vaping frecuency, but if I give you a straight case, maybe I ll make a good relation between other materials and their durability. It happened that during 2020, with the pandemic on full first impact, importations were very slow and in some cases, closed for long periods of time, I was trying to get some imported wires but I didn't have enough luck to find those I needed, just very thin wire for mtl equipment, which I didn't have. All was sold out from vaping websites... I ve managed to get a Zeus X rta and with it, the included premade coils (I think these are Nichrome)... Thing is, I used the same (and only) metal coil for almost 6 months, obviously replacing the cotton when needed (I had all the other materials, bags of cotton Bacon, tools, fresh liquids, etc), the liquid I ve been using is Don Juan sweet tobbaco and reserve, from King Crest. In those six moths I didn't vape all days or weeks, since finding or importing liquids were also a problem, so confinement and the lack of products, push me to smoke again, sadly, but I didn't give up and I start to build again the coil meanwhile the purchases arrive from other countries. The metal coil doesn't seems to be exhaust in plain view, it gets datk or black, as normally should be after several days of use and when tasting a bit burnt, but once I clean up with a brush, water and some short dry burning when building again, it gets back its grey metal color, not the same shine as a new one, but close. My vaping frequency was sometimes in chain, due to anxiety, but not all day or days and I was careful to rebuilt often. Mods are one Aegis X and one Smok P3, wattage I use is between 40 and 60 because even if the coils can be auto detected and suggestion is 75w, this is always overrated and burning taste triggers in 3 days. Only thing I did notice was sort of a metal taste for a period of time, that after went away and never got back. If someone wants to drop an answer, be welcome please, thank you all...
So I recently purchased a Pulse X 90w. And I've noticed that the squonk bottle is leaking inside the mod itself. And sometimes juice gets pretty close to the positive battery contact. Does anyone know what may be causing this? Whenever I fill the bottle I always fill it up to about 3/4 so that there is displacement for the tube itself. I get it all screwed down and back in then after a while, or my next fill I notice that it's leaked again. This is becoming a rather annoying problem. And I'd rather not chuck a mod that I just bought because of a stupid issue such as this. Any suggestions would be greatly appreciated. Thank you!