What Should I Upgrade To?

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance  

Well I bought a mod and a kayfun and after about a week of fiddling and trying to get it to work its just way too much of a hassle so I am probably going to sell it to my friend that wanted a mod and kayfun anyway. Now I currently tried to upgrade from mini nautilus and vision spinner 2 to mod but I kind of want to downgrade even further since I went through 2 vision spinners and 2 mini nautlius in about a month and a half so obviously I am not happy. Im sure you all know why i hate the mini nautilus. But now i was thinking about going back to the Halo g6 starter kit that i got started with vaping. When i look back it was so hassle free, convenient, and i didnt attract attention like the bigger batteries etc which are usually frowned upon by people in the general public. I use 12mg so I was wondering to make up for the smaller battery and vapor that i should upgrade to 18mg? Yes I know im going to end up spending like another $100 for a starter kit and halo ejuice which is expensive since its $20 for 30ml and other ejuice doesnt seem to work in the g6 cartridges. I really need a 2nd opinion on what people think of this plan. The g6 should last me awhile unlike the vision and mini nautilus which id have to keep rebuying which is like $50 a month even though i buy off mtbakervapor which has much lower prices than halo even though its also prob lower quality. What do you guys think? Are mods just an addiction hobby thing that smokers actually need.  

Hello everyone!

I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!  

Just sat down this morning and had a quick look at where all my money's been going for the past few months.
Previously, I had smoking down to ~5 a day. Used to get them all from abroad, so roughly £5 for 20 at most. 40/week so £10/week and £520 in a year.

My current ecig spend:
£30 for first ecig
£25 for a Vision Spinner Battery
£15 for replacement tanks
£40 replacement coils (standard coils, then unicoils)
£100+ - Totally Wicked liquids
£50 - iStick
£25 - Subtank mini
£70 - mixing kit and concentrates
£50 - e-sheesha + cartomisers
£50 - premium liquids

£455+ (and that's just about 6 months, started in October)

I know that most if it was invested in the kit, and now that I have my ideal setup I hopefully won't be making those expensive purchases anymore on tanks and batteries. The DIY kit has enough to keep me going, now it's just buying concentrates that I need for recipes. I would have saved a lot more if I'd got the quality kit early on, but at the time I was new to it and wasn't sure if it's something I'd pursue.

It's probably not even that much in comparison what others spend, but I still feel like I've spent way more money than I should have.
Anyone in the same boat?  

Hi,

I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.

I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.

I am not interested in a big old MOD or anything. I like the pen-like style.

I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.

Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.

Anyway, thanks for any input on this!  

So hi guys I been vaping since April loven it so I'm looking get something different i got the ego c twist with aspire bdc clearomizer. What should I get next I was looking to get the vision spinner 2 and istick eleaf 30w or should i just get the istick eleaf 30w or 50w. I wanted to get the vision spinner 2 from fasttech with couple of other things but I'm going to get both.  

Hello just received new spinner 2 battery. I think I am burning my coil now it taste burnt. I have used spinner 2 for years no problems. This new version has more power has anyone experienced same issue. Do we just lower the voltage ? Or are better tanks needed or different
ohm coils? Thank you in advance for any help or opinions  

I have had a kanger protank 3 for a year and a half now with a itaste vv battery, i need a new updated Ecig now.

I am willing to spend around £30 (no more than £35) and would need a battery and a tank.


I want the best flavor and vapor production for the money. I also want it to be reliable as the kanger protank 3 leaked a lot in my time and sometimes would randomly stop working.


Thanks guys!  

Hi.

I need some new batteries for my Aspire Tigon Tank. It has to be much like the Tigon battery.

Not big batteries and not small, cause i don't like heavey batteries, and it should give lots of vapour. It should be the cylinder shaped batteries.

Whats the watts on the Tigon? Is it 40? It should be the same.

And else should you notice? Do you also need to notice volt? Is does'nt need to be 1800 mah, but it should be high. Maybe least 1300.

And of course 510 connection.

Please name som models, that fit my description.

What about: Vision Spinner 2, Innokin Endura T18, Joyetech Ecxeed D19, Kangertech EVOD VV?  

So I'm trying to get my mom into vaping in order to help her cut back on her smoking, since my fiance hates having her smelling like smoke when she comes to visit our baby girl, as the smell transfers to our daughter after my mom holds her. So, I've had her try my gear: my XPro M80 Plus, my Vision Spinner II, and my Ego batteries, explained some of the differences to her like battery life, power regulation, safety, etc. Anyway, I went ahead and ordered her a Smowell DVP 50 to try out, and I'm going to be getting her a Nautilus, either the full-size or the mini, depending on which one she prefers. My question is, what kind of battery should I get for her to put in it? I know she's not going to be sub-ohming anytime soon, so I was thinking something with a high mAh rating would be good, like a Panasonic NCR18650PF, Samsung 25R, or LG HE2/4. Would one of those be acceptable?