Proper/preferred Wattage Bvc Aspire Coils

Just curious what wattage you guys are comfortable with. I just got my Itaste mvp3.0. I have the Kanger Subtank Nano with a .5 ohm occ. The mvp recommends 25-30 watts for that. But the coil itself says 15-30 watts. Kind of confusing. Anyway I keep mine between 15-20 watts. Anything more heats the tank up too much, like I can feel the heat on my lip.

I just picked up a Kanger Genitank Mega also, haven't tried it yet but it came with 1.8 coils, so I'll probably start at about 6-7 watts and go from there.

I love this thing, so far very happy with my purchase, hopefully it holds up for a long time. I guess just want to see if I'm doing everything safely.  

Hey all.

So I've been vaping since January. I started out on a kanger ego and an aspire k1. Since then I've gone through aspire cf batteries, and finally made my way to my current set up. An mvp 3.0 or istick50w with my subtank mini.

At first using the stock occ coils with the subtank, I decided to buy some wire and cotton and here I am. Been building my own coils using the RBA section and loving it. I wick it properly and never get a dry hit, going anywhere from 18-25 watts, which is my preferred settings.

Now, it's only my preferred settings because I can't seem to go any higher. On either device. I get dry hits like crazy despite pancake wicking which I've specifically done to prevent said dry hits. I always have heard that it can possibly taste better the hotter it gets. And I don't mind a hot vape. But it won't let me try!

I'm well saturated, well wicked, and my juice can be anywhere form 50/50 to 70/30pg. I can do quick pulls on fully open, and slower toots on the middle setting on the subtank. I just can't go any higher than 25watts and I don't know why!


And that's not for just the coils I built. It's for the stock occ .5 ohm coil as well. And like I said all my cotton is beyond well saturated. Any help?  

Ok so I know that kanger subtank .5 ohm coils are good for up to like fifty watts and the subtank 1.2 coils are good for up to 26 watts, my question is this kanger has released vocc coils pretty much the same coils they have for the aero tank , genitank ,etc except now they have organic cotton like the subtank coils. Is it safe to think that the 1,2 and 1.5 ohm vocc coils will be safe as the 1.2 and 1.5 subtank coils at the 26 or so watt range, if not how many watts are safe so I don't burn them to hell  

For the past 11 months I've been using a combination of kanger pro tanks and then more recently nautilus tanks with their respectful "throw away" atomizer heads. With these tanks I've been using either the itazte vv 3.0 or itazte VTR while keeping the vaping around 8-10 watts.

I've since purchased an Eleaf Lemo and have been making my own single coils in the same 1.8-2.5 range as the protank and nautilus coils.

Should I be able to and get successful results by cranking up the heat to let's say 12-15 watts now that I'm rebuilding the coils with cotton? Have the stock coils been holding me back in terms of cranking the heat? Maybe because they don't wick as well self-built coils?  

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks  

My first .5 OCC coil only lasted 3 days . I put my device up to 25 watts and it totally fried it. A terrible burnt hit. I backed it back down to 20 watts and it was fine for a little while, but then another bad burnt hit. Down to 15 watts and I literally sucked hot particles in my mouth when taking a hit. ...? The cotton and/or coils are literally breaking apart? That's totally gross and I can only imagine, not that safe.

My second .5 OCC, I never put my device above 17 watts, keeping it at 15 watts for the most part. Within 4 days, same thing ... total burnt hit one day, sucking up hot particles the next?

What's going on? I thought I was supposed to be able to hit a .5 coil up to 30 watts ... Is sucking up hot particles from the coil normal? Should I just keep it at 12 to 15 watts and that's it, taking 1 to 2 second drags and that's it? Is it just a string of bad coils?

Thanks

EDIT: Thought I should mention that the juice I used for both coils was 50/50 watermelon. I hear it's better to use higher VG liquids with sub ohm tanks. But can that be part of the reason why the coils are being fried so quickly?  

Hi, so I have several different brands of 18650 batteries but I'm getting ready to pick up the new Geekvape Aegis X, I wanted to get some new batteries. I have been reading up on it but I'm so confused, I don't vape very high wattage It's always under 50 watt, 45 usually being the most, so what would be the best batteries for long activity? Any input would really help. Thanks  

I'm looking for internal battery box mods that has wattage option higher than 50 Watts. So far I've found Smok Xpro M80 Plus, which is an internal battery box mod with 80 Watts power at a great price. ($55) Is there any other internal battery box mods? MVP and Istick serieses are of course excluded here.  

Somehow, I inadvertently pushed the buttons just wrong today and it went from 7 watts (my usual power setting) to 50 watts (the highest setting). I didn't even mean to push any of those buttons.

I experienced instant burnout and a horrible taste in my mouth and the coil was instantly ruined.

Do people really vape at such high power? If so, how often do you have to replace the coil? And how many ohms are you putting that through? The coil I replaced it with is 1.77 ohms which is about the same as the one I burned out.

50 watts seems so excessive to me that I double-checked and yes, that's what it says it goes up to. Even at 7.5 watts the coils seem to burn out too fast which is why I vape at 7.

I feel like Nigel Tufnel designed this thing. "But it goes to 50. That's 43 higher than 7. So it's like 43 more. So when you're vaping at 7 watts and you want that extra push over the cliff..."

(I'm actually impressed that Nigel could do the math to figure that 50 was 43 higher than 7)  

Hi, I was thinking about buying the Kanger 1.2 ohm enclosed wick but am not sure exactly what wattage or voltage to use. I currently use the Protank 3 on my Istick 50w. I am currently using the 1.5 ohm wicks and run my device at 9.2 watts and 3.8 volts. So I was wondering if this is right and if I should up the wattage for the 1.2 ohm coils and leave the voltage the same?