Just two questions.
Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.
Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?
Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance
I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!
Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it
Hello everyone!
I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!
I'm curious. I went from a crappy Evod, to a Vision Spinner 2, to and MVP3.0, and now have an istick 50w to go with my mvp. I use a couple kanger subtanks and an aerotank just for flavor choice. I feel like I would never need anything better or especially more powerful than these ever. The highest wattage I vape at is like 16.5 max. So I see lots of people saying these are good starter boxes, or that theres is 100 watts, and whatever else. Why? I'm seriously curious. I mean hell with my track record of ugrades it's not far fetched that I'll be one of those people one day lol. But right now, I feel like it can't get much better as far as flavor, power, and battery life. I know there are better, my question is why.
Hi,
I am currently using two different Vision Spinners (900mah and 1600mah). Both are variable voltage. I have paired the spinners with the Kanger2 Mini protank.
I vape at about 4.3v. I use 1.8ohm or 2.2ohm coils. I have been happy with the result so far.
I am not interested in a big old MOD or anything. I like the pen-like style.
I bought an Aerotank Mini that turned out to be a clone and it didn't work. Maybe it came with a bad clone coil? I don't know.
Any suggestions on updating the mini protank 2 and the Spinner? There are just way too many products and I have no clue where to start. The short life of the Kanger colils has been pretty annoying. I read they have better coils now for the Protank 3.
Anyway, thanks for any input on this!
Curious if any of you have gone to the Kanger Aerotank from the Nautilus Aspire tank? I have two Nautilus tanks and I have to say it is real hit and miss when I change the coils out. Sometimes I will have a clean hit and no burnt taste and other times it is burnt tasting for the life of the coil. A local vape shop told me to switch to the Kanger Aerotank. They did not have it in stock so I ordered it to try. Yes I am doing the whole prep scenario with the drops and hitting it 4 to 5 times before hitting the button. He told me it is common with the Nautilus, but not with the Kanger Aerotank. Any feedback?
Hello just received new spinner 2 battery. I think I am burning my coil now it taste burnt. I have used spinner 2 for years no problems. This new version has more power has anyone experienced same issue. Do we just lower the voltage ? Or are better tanks needed or different
ohm coils? Thank you in advance for any help or opinions
Hello!
So I got a Spinner 3 from Vision today.
I have this problem when the atomizer, I get a red light flashing 3 times at me.
But when i take the atomizer out, i get a white light.
I have absolutely no idea why its doing that.
Please help.
(Im new to vaping & new in this community)
So hi guys I been vaping since April loven it so I'm looking get something different i got the ego c twist with aspire bdc clearomizer. What should I get next I was looking to get the vision spinner 2 and istick eleaf 30w or should i just get the istick eleaf 30w or 50w. I wanted to get the vision spinner 2 from fasttech with couple of other things but I'm going to get both.
hello vaparoos,
I have a friend with a spinner 2 and she wants to know the best tank with the biggest airflow she can put on it. she would like to produce more vaper since she has been hogging my mvp 3.0 and my subtank. she doesn't want to invest in a mvp or anything bigger but she does want more vapor ...
what do you fellows suggest, in my opinion and correct me if i'm wrong any tank can fit over a spinner even tho its not a 510 connection. will this work?
thanks
angele
with no interest in sub ohming or rebuilding at this minute what is the best standard tank to use for liquids?
I currently use a nautilus and a vision spinner 2 and have done a for a while now. The problem I have to be honest is better liquids like flavours by Joe burn the nautilus coils out within a couple of hours and fusion vapours (my personal favourite) last only days which I know isn't normal.
so to someone with a limited knowledge of vaping and looking for very easy set ups rather than technical building, what are the best tank and battery to use for a swap out coil and generally not a high power Vape ( I tend to 3.8 it)