So I just received a 100w seigei box mod and I fully charged my 2 18650 batterys that worked fine in my mech mod. When I put them both in my sigelei the battery percentage only tops out at around 50% charged?!!! Like what they are for sure both fully charged. Anyone know what the problem is?
I got a problem with my Luxotic Surface. I'm using a LG Choco Battery 18650, it was fully charged and when I press the fire button suddenly it appears for Battery Low even the battery was on fully charged. I tried my spare battery maybe its just a mistake putting a fully charge battery, but it was the same issue also with the spare battery. I tried the 2 batteries with my Geek Vape Aegis 100W to check whether my batteries are already broke but it works fine. I was vaping for my Luxotic Surface by 55.0 Wattage, 0.21 ohms, 3.40 Voltage. Can someone help me out to fix this problem?
I bought my Sigelei 100w Plus a few days back and ordered 2 Sony VTC4's on my same order (I'm confident they're legitimate, I've bought some before) to be able to marry them together and use them with my Sigelei. Upon receiving the batteries, I labelled one A, and one B and put them into my charger at the same time (charger was off, put both in and turned it on), one battery is slightly more charged than the other (it's 2/3 bars, while the other is still 1/3). I'm a bit worried about using married batteries, I understand rotating A and B in my Sigelei and charger but will they be the same charge when they're done? They're new batteries and they both went on at the same time yet one of them is charging a little bit faster.
When both of the batteries are fully charged, will they be safe to use and cycle accordingly? I heard about if one battery has even a tiny bit less, the batteries will take an uneven load and it will make it risky. How do I ensure that these batteries remain married?
Hey guys,
I finally updated my charger a few days ago (I think before I had the VP2) or something like that. Quick question on something I'm noticing that seems a bit odd to me.
When I charge (for example 18650's), a battery that's fully charged in channel 1...it flashes FULL/0.00 mA, I remove the battery. A few minutes later, I'll put the battery back in the same bay, and all of a sudden there are a few hundred mA's that show up on the screen that need to be charged back into the battery and it takes a few minutes for channel 1 to recognize the battery is fully charged and flash FULL/0.00mA again (although it does show above that's fully charged at 4.2v).
If I take that same battery and do the same test but this time in channel 2, within a few seconds it recognizes that the battery is fully charged and flashes FULL/0.00mA. So it seems channel 1 is not working as well as channel 2 is, when it comes to recognizing information from the battery.
Is this normal for this charger or do I have a defective charger?
Hi I just got a sigelei 100 watt plus and this is my first time using freshly charged batteries in it... it's still reading at being 100% in the sigelei. ive been using it for maybe 3 hours total . Is this normal .. because its starting to make me wonder if something is wrong. Its been at 40 to 50 watts this whole time. I didnt charge the batteries at first when i got them because my charger did not arrive yet...then once it did come i charged them and now its continuing to stay at 100%
Herro!
So, I always used to use mech mods from about 6 months to a year and a half into vaping. For the last 6 months I've been on regulated (iStick 30W and 50W).
When I switched to regulated I retired my mech mods and 18650 batteries to the closet. I made sure they were all around 50% charged because I heard from someone on here that was the best condition to leave them.
Well recently I've had this curiosity to try them again, only for at home use, mainly for the novelty of it.
So, my question is, what will I have to do to revive these batteries? Are they safe to just throw back on the charger and use when fully charged? Or are they not safe to use?
Batteries: 4 Sony VTC 4's (all were acquired about a month before I stopped using mechs), 2 XTAR (Sony) VTC 4's (about a year old now) , 2 MXJO 2500mah (20A LG's) (about a year old now).
Let me know! Thank you!
Vape Happy,
Cullin Kin
Hey guys! i've been having a huge problem with my sigelei 100w ohm reader just jumping all over the place when i vape. it changes every few pushes and varies anywhere from .5 to 1.2 which is really obnoxious because when you dont notice it change you almost always get a dry hit. what do i do?
Just as a toy I ordered the Joyetech eGo one 1100mah battery and the clearomizer. The performance of this thing is awesome. Im using the .5 head and the battery is full charged and it is putting out crazy vape. Assembled it is about the size of my ipv v2 by itself. This thing is tiny. I loaded The Gentleman's Reserve and the flavor is great. Finally a nice little poket setup for me.
Fully charged this is putting out 35w
Where I ordered it:
Electronic Cigarette | E Cigarette | myvaporstore
I have decided to keep one of my mods with the battery removed in a spare purse. I had the bright idea that I'd keep 2 batteries charged in a plastic case. This way if I switch purses, I do not have to worry about forgetting my mod and, if I do, I will have a spare one.
So --- approximately how long will the batteries (21700) stay charged without being used?
Hi there,
My rincoe manto aio battery has started to flash. Have tried two new fully charged batteries and it has 5 bars in the battery on the screen and one of them flashes. Even does it when I turn the mod off. Can anyone help?
A friend of mine has just bought a Kbox and a brand new sammsung inr battery.
When the battery is fully charged it will only fire at 20w with a .5ohm coil. and when it gets to about 50% charge it will only fire at 8w!!
Is this normal??