Atomizer Seat

I took some of the advice from you guys and got some high quality batteries for my Voopoo Drag X and chucked the ones I got from the local vape store. Everything is working fine now. Why would good batteries stop the "atomizer short" message?  

Problem

You've screwed your new atomizer into your mod. It's all the way in and works, but the atomizer wobbles.

Why? - Because the positive 510 connector is too long, meaning that only the front part of the negative threading is engaged.

Solution

A shim.

shim
/ʃɪm/
noun
a washer or thin strip of material used to align parts, make them fit, or reduce wear.

Cut a disk the same size as the base of the atomizer, put a hole in it's center slightly larger than the 510 on your atomizer. Slip this over the atomizer 510 and screw it into the mod, wobble gone.
The thickness of the shim will need to match your application. If it's too thick the 510 may not reach the positive pin and no juice will flow.
I initially used a credit card which was too thick (1mm), the positive pin didn't connect. I then used a playing card (0.5mm) and this was spot on.

Why? - The base of the atomizer is now supported, so the free play on the pin does not matter.


Owyhee Mountain Fiddle Shop: Zen and the Art of Motorcycle Maintenance

 

Hello,
So I recently bought an "Aspire NX30 kit" and I set everything up, I poured menthol E-liquid into the atomizer, and for some reason it doesn't taste the best. I can feel the menthol taste but I feel some burning taste too. The product and also the atomizer is brand new. Some of my friends said that the atomizer is trash, but I can't believe that a brand new atomizer is completely unusable.

Does anyone having/had this problem? What should I really do?

Thanks a lot
Have a good day.  

Hi all,

Thought I would share with you guys, didn't place my order yet, trying to figure out how to spend my money in the angelcigs anniversary sales page Angelcigs Clearance, prices r just ridiculous, a few things i have my eyes on :

Pollux Style Rebuildable Dripping Atomizer Black 1:1
Omerta Style Rebuildable Dripping Atomizer 1:1
Venturi Kayfun Styled RDA Rebuildable Atomizer 1:1
Shield Style Rebuildable Dripping Atomizer 3 Rings
Doge V2 Styled RDA Rebuildable Dripping Atomizer
Orchid V3.5 Styled Rebuildable Tank Atomizer 1:1
AQUA V2 Style Rebuildable Atomizer RTA+RDA 1:1

Happy shopping guys  

Mine.

E-Juice: My own mix; 100% VG; Root Beer 20%; Black Cherry 2%; 5mg VG Nic; No DW or EA

Atomizer: Aspire Atlantis .5ohm

Battery: Eleaf iStick 30W @ 27.5W

Copy/Paste/Fill-In

E-Juice:

Atomizer:

Battery:  

Don't get me wrong, I love to vape. But I do miss the convenience of analogs. Every corner store carries your brand, it's easy to bum a smoke from a friend or even get a light from a stranger. Vaping isn't that easy.. Today I replaced the coil in my atlantis before leaving home for the day. I suppose I should've tested it before I left the house but I haven't had a stock coil fail yet. So about a hour away from home I pulled my sx mini out of my lunch box and was looking forward to a vape. But it gave me an error, check atomizer. So I unscrewed the tank and double checked the coil was snug to the base and no moisture was under the coil. I also checked the floating pin on my sx mini and everything seems good n clean. Still I get the message, check atomizer.. Sooo frustrating because I'm a hour away from home with no backup vape and no extra coil.. I broke down and had a terrible death stick. Couldn't even finish it due to taste and smell. It's just not my vape. Anyways no one else at my work vapes so I had to vent to some other fellow vapors.. I can't wait to get home and get another coil!!  

I know a lot of you are thinking "what the heck is wrong with this guy?" but just wait for it. I just realized (actually, remembered) that Dokha, the super strong, one hit tobacco I'm always looking to vaporize instead of smoke, is actually sold in a moist (probably VG) form used to boost shisha blends.

This means it can be vaporized in an atomizer and produce pretty decent clouds without combusting, kinda like wax, right? What are the chances that this might actually burn in an atomizer who's temperature is well below the combustion point?

This is what it looks like (the dark stuff).

 

hello all, new user of the joytech ego one. I am loving it. I was just wondering about how long most users get out of the 1.0 atomizer, before it needs to be replaced?​
Many thx  

Hi guys,

Is it really normal for an atomizer to get hot especially when using dual coils?
I just created a dual coil a couple of minutes ago using 24 gauge kanthal wire, 10 wraps each on a 2.4mm precision screw driver. My meter shows that the resistance is at 0.4 ohms, being curious and all since this is the first time that I made a dual coil, i decided to test it out.
Got some good flavor and vapor, though the vapor is warmer than I would want it to be ( I prefer cold vapor)

After taking a couple of 5 secs drag, I notice that my atomizer became hot, not warm, but hot. Is this something that I should be concerned about? I am doing something wrong or have I done something wrong when creating my coils?
Please help.

Here are some pictures of my device and atomizer. ( Philbox wood mod running on 2 pcs of AWT 18650 2600mah battery, my atty is Haze by vapehead origins)


 

getting atomizer open message from my heatvape invader mini. the atomizer fired on my eGo ONE... just got it yesterday, do i have a bum invader mini?