I only have this problem with one juice flavor. It has to be the juice. Same tank and setup as all my others. I have a fresh coil and tank, load it up, and in less than a day my coil is gunked up and turns my clear juice dark brown. Is this safe to vape? It's annoying having to finish it and rinse my coil. Usually I can just fill my tank/top it off without worrying about cleaning it all. Anyone else have this issue?
So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:
Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg
There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.
So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.
I have the Istick 50 with a Nautilus tank. 1.7 ohm coil. What would be the highest watt useage recommend for this set up? I read the user manual for the tank and didn't see a max safe watt. I don't want a melt down. I did however notice that once I get above 18 or 19 watts the flavor of the juice starts to diminish. is this something that could be rectified with a different type of coil in the tank that would allow for higher wattage and give a better taste. Or a different mix of juice?
Looking for a new non sub ohm tank. I have a few sub ohm tanks and just can't get into it. It's just not for me. I enjoy a flavorful, cooler mouth hit rather than huge low flavor lung hits. I am currently vaping my old nautilus mini and still like it but I am starting to get some chest pains. It may be my juice or just me but something about the coil fill material just makes me uneasy. I'd like to get a tank that performs like the natilus mini but has a better more pure coil fill material. Any suggestions or am I looking for a unicorn?
My English not good but hope u guys understand....
I have question...I am gonna talk about rtas....soooo we got the air flow part of the tank when is the coil and that we suck air through it...and there is the juice part where holds the juice....and thing that seal the 2 spaces is the cotton....the juice reaches to the coil throught this capillary action I guess...I was thinking tho while we suck don't we create also vacuum and draw more juice if the airflow can't keep up with our draw?? And if that's correct then...this space that holds the juice should be sealed good so that it can't draw air lets say for example from the top fill cap and then push more juice into the coil cause it will have the atmospheric pressure?? Or maybe it's the opposite and the vacuum we create while we puff should get lose over time while we don't vape??? I am trying to get more understanding about how stuff works hope makes sense and someone can correct my mistakes and make things clear for me
Imagine your self filling an RTA with fresh juice, only to have the worst vape you can endure as you cough up a lung. No its not a dry hit. Do you blame the juice or a clogged up coil? In this episode, I will take a short journey and explore to a better vape.
After a week of chain vaping, over 50ml of juice, a mix of 3mg and 6mg Nic, the rayon wick has finally given up and no longer produced a clean vape. After visual inspection, the coil and the wick has indeed had a significant build up from juice. To the point that I could no longer see wick material between a spaced coil.
After discarding old wicking material and cleaning the coil, i wicked an RTA with fresh Rayon and filled it with juice. My favorite tobacco juice has come a live, i can now take long and deep direct lung hits with enjoyment. My taste buds are intoxicated, as my lungs fill up with smooth and silky vapor with every inhale.
Keep an eye on your coil by visually inspecting it on daily basis. Trust your body and your taste buds when a juice no longer tastes as it should. Re-wicking your RTA/RDA on regular basis or every few days, will help you eliminate many concerns and issues that you might be having with juice flavor or vaping experience.
It only takes ten minutes to rewick, and in return you will continue to enjoy many hours and days of pleasurable vaping experience.
Good Night.
I can only get about a 1-2 day life span out of coils that are organic cotton based. After 1-2 days, they start seeping a dark colored liquid into my tank and ruining the juice. This has happened in my Atlantis tank running Melo coils vaping at 32 watts and my Herakles tank running 55 watts. Keep in mind I vape about 7-10ml a day. Juices are 70VG/30PG or 80VG/20PG all at 3mg nic.
On the flip side, if I vape old school Atlantis coils at 32 watts on the same juices, I get a full week before this happens.
Any ideas on how to make cotton coils last longer?! For this reason, I can't wait to get my Lemo 2 in. I'll be able to rewick daily and not worry about cost.
The way things are going, I am losing so much money on coils it's nuts. See picture to see whats happening.
Oh yeah, this is happening on all kinds of juices I vape. Mt Baker Vapor, Vista Vapors, 4 Pillars, The Milk Man. Some are budget juices - others are premium. No matter what juice I use, it happens.
The BIGGEST killer is Zeus Juice with 80%PG, 20%VG. This juice kills a coil in one tank full. I'm guessing the sweeteners in that juice do it.
It's frustrating because I LOVE my Herakles tank running at 55W but if I have to replace the coil every 1-2 days, that's SO expensive.
Sooo last weeks I was able to wick my atty in a way that for me it's perfect...no dry hits no leaks or flooding or anything and I enjoy Soo much...
After vaping some strawberry cookies and chocolate....(very dark juice coil abuser) it was rewicking time...
Put fresh cotton and start vaping and dammm bad taste....dry hit
Tried make it work...nothing...
Ok let's rewick...again same dry hit
Not anything crazy but just that light dry hit bad taste....
After rewicking 3times and using almost no cotton hahaha I was like ...... Cant dry hit now
TURNS OUT IS WAS A JUICE I BOUGHT ALREADY MADE...WAS CUSTARD CARAMEL AND SOME CEREAL STUFF TOGETHER OR SOMETHING
THIS THING TASTES LIKE DRY HITS!!!
WHAAAAAAAAAAAAAA not exactly same taste but was very similar EWWWWWWW
I AM SUCH A NOOOOOOOOOB
anyways that's all....I make my own juice just forget my bottle and I was at work so I bought a juice from a store nearby
Greetings,
maybe I was bored. Maybe to much doom and gloom on all the bans of new gear and the shipping of it. I started to think - why not have some fun with some of the stuff I already have?
Cases in point - the two rigs in the picture above. I believe that all the hardware (mods and tanks) are over 5 years old. The setup on the left has a bit of a story about it.
Sitting on my desk is a few old tube mods that I wonder what it would be like to use again. I found a old (I think KFv3) tank laying around, built a very low mass 2ohm coil in it, filled it up and went and tried it out on my old 15W tube mods. Sadly not a one of them liked the KFv3 and would register the 2ohm coil. So what to do? I had a old Evic that surely could be put into power mode. While I was not to surprised that it all works (I've actually refilled the tank a few times and replaced the battery once) the vape is more restrictive than I tend to like and be it the build (or the 10W power mode) I don't really like the flavor of the unflavored juice with this. Another negative is that while it is top fill, there is no juice flow control so the atomizer get flooded each time the tank is refilled. While I could (and have) used it in a pinch, I can get 1-2 tank fills on a single 3000mah battery.
The setup on the right represents some historical firsts for me. Years ago when I first got into rebuilding a Lemo2 was one of three tanks I bought when I started. It was also my first top fill tank. Sitting under it is my first ever Dicodes mod (a #6). This mod is setup in TC mode with 380F temperature setting and 23W.
Be it the better tank or the use of TC mode, the setup on the right provides a good vape. The 26650 has enough mah to easily allow me to vape the tank dry (takes me most of the day) and since years ago I got Dicodes very over priced charger, I just drop the mod in the charger at the end of the day and its ready for more vaping in a few hours.
So, anyone else putting to use or having some fun with +5 year old vaping gear? How do you like it?
g.
So....been vaping for 6 years.
For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.
Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....
Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.
I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.
FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.
Today I discovered one tank wasn't giving me much of a hit no matter what so, although I thought it might be too soon, I decided to replace the coil. Unfortunately before I did I had turned up my MVP 20w to about over 7 and I burned some juice?
After I replaced the coil I indeed began getting good hits again and turned down the MVP. But what can I do to avoid this in the future since some tanks cook better than others and I keep forgetting which levels I have them at.
And how do I get that burnt taste out of the tank? Thanks!