Hey guys how does the delta 2 rba vape with max vg? any dry hits? i usually dont bring up the wattage too much probally around 30 watts thank you keep in mind i am talking about the rba base not the jfc coil heads
I just got a Delta II tank as an entree to sub ohming after a disastrous adventure with a MELO. Strangely enough, though, while blowing an occasional cloud at 30 watts is fun, I find I also like running it with the air flow pretty restricted on the tank and at 14-16 watts on the regulated mod and taking mouth hits. Really nice flavor and "just right" (to me) vapor production.
Is running a sub-ohm coil at low wattage potentially causing any damage to my mod (iStick 30w) or my tank?
So....my lemo was my #1 RTA, until I got the subtank mini and delta 2 (although I haven't tried the delta 2 yet, but have heard very good things about it). I have been sad, because I have put my lemo to the side, because my newer RTAs have more airflow. I would vape my lemo most of the time between 25-30 watts, and could get it up to about 38 watts without a dry/burnt hit. Anything over 40 would give me a dry/burnt hit, which is still impressive. (with my old wicking method)
Long story short, I decided to drill out my airholes on my lemo. I found another guy that had already done this, so I followed his bit sizes. He claims that he now vapes his lemo around 70-80 watts without dry/burnt hits. I had my wisdom teeth out about 3 days ago, so I can not vape as I usually do (in fear of getting a dry socket) so I have had to barely hit my tanks to vape. I hit the lemo, after modding it, last night, at 40 watts with a wussy vape and no dry/burnt hit at all. I can't wait to actually vape like I usually do and see how high in wattage I can go. By the way, I am trying something new and using Drip Trippers pancake wicking method on this as well, and a 0.78 build.
So here are the pics, with the sizes, if anyone wants to do this. It took me about 15 minutes:
4 External air holes (pic 1) - 3/32 drill bit
Vertical stem shaft air hole (pic 2) - 1/8 drill bit
Vertical stem 4 air holes (pic 3) - 3/32 drill bit
Pancake wicking method.
I know y'all are the experts.
My husband and I are planning a trip to Cancun this fall. We're flying Delta. I know that Delta allows vape gear in carry on luggage.
However, I do not know if we are allowed to have our gear once we arrive at the airport in Mexico and/or return home from Mexico. I cannot find a definitive answer online.
Do any forum members know the answer? Has anyone traveled to Mexico recently, and what was your experience?
Btw: Preemptively stressing about this. My husband and I have been cigarette free for many years now, but we have never gone without vaping for any period of time.
Thank you!
To keep this short I tend to change flavors in my delta 2 quite often and have a large assortment of flavors. That being said I never have enough replacement coils to keep switching them out fresh for flavor changing. I do wash my tank every time I change flavors but I don't wash the base and coil over fear of messing something up since I don't tend to let them dry before I decide to start vaping it again. I usually don't think about the transition flavor however I made the mistake today of switching from a caramel macchiato to a vanilla banana wafer pudding so as you can probably imagine the flavor is complete trash.. With all that cotton in the delta 2 coil, how long should I expect to have to vape like this? Ten toots in and I can still taste the macchiato like the cotton is reserving it just to teach me a lesson.
Greetings,
i just picked up the Delta 2, but it's whistles like a dying birdy. Anyone else experienced this?
thanks,
John
I am running my Kanger Subtank mini rba deck on .9 ohm (spaced 4 wrap 28awg IIRC) at 13 watts and it is cloudy and flavorful. The OCCs were fine but I prefer the rba I think (even though I'm still a bit of a build novice). Many others seem to run it at 25+ watts and lower resistance. I had it at .5 Ω and ~19 watts was good, had dry hits above 23 watts. Now have dry hits above 15 watts at .9 Ω. I'm still playing around, but this current build/wattage is working awesome.
Other important factors:
Tobacco and vanilla DIY juice
4mg
50/50 PG/VG
Organic cotton, standard wick
Only had Subtank for 3 weeks
Coming from BCC clearos
Been vaping for 6 years
Used to be mouth-to-lung, doing a lot of direct lung but still switching back sometimes
What's your style with the Subtank? How are you running it? What's your wick-style? Dry hits? Wattage? Ω?
Just curious what wattage you guys are comfortable with. I just got my Itaste mvp3.0. I have the Kanger Subtank Nano with a .5 ohm occ. The mvp recommends 25-30 watts for that. But the coil itself says 15-30 watts. Kind of confusing. Anyway I keep mine between 15-20 watts. Anything more heats the tank up too much, like I can feel the heat on my lip.
I just picked up a Kanger Genitank Mega also, haven't tried it yet but it came with 1.8 coils, so I'll probably start at about 6-7 watts and go from there.
I love this thing, so far very happy with my purchase, hopefully it holds up for a long time. I guess just want to see if I'm doing everything safely.
The sub ohm coil head is $3.39 each and the hollowed out tube is $9.99 each from Hoosier ecig. Whats the difference? Is the more expensive one any better? Could it vape at higher watts or last longer?
Atlantis sub-ohm(0.5ohm) Coil Heads from Aspire
Kanger EVOD heads
Hello everyone, i bought a new vape 24H ago because my first one was terrible.
And when i use the recommended wattage for my resistance. The tast in my throat is pretty agressive.
Recommended : 40-60 Watts
Using : 26-30 Watts
So i wonder if using a too lower wattage can be bad for my resistance;vape itself.
Also i want to know if i use if i puff aproxymatly 0.5s is bad and i should make it more long.
Thanks (I don't know if its a duplicate, sorry if yes.)
im using an atlantis 2 with the .3 ohm coil and im using it on an eleaf istick 50 watt. my first coil from the pack was good. then went that burned out i put in a new coil and it keeps dry hitting. So i changed the coil. Dry hits on that one too. And on a third coil. Same liquid as i was using with the wattage at about 47-50. Why would it be dry hitting like this? also, it seems to be getting way too hot at those wattages