Just Thought I'd Share

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks  

Hello everyone, I feel like I should post this in the Beginner's Thread. I bought an IPV4 today and it is my first temp control, non-built-in battery mod. I need help! LOL like with everything. I tell you my gear. The IPV4 of course, a Nitecore D2 charger, a pair of Imeren 18650 batteries, 5 Kanger OCC nickel coils and 2 .3 Atlantis coils. Along with an Atlantis V1 and pair of Kanger subtanks. Now I know, some of you are probably thinking people like me shouldn't have temp control but please humor me I want to learn.
Basically my first question is where do I start? How do I get to temp control on this mod? Where should I set it for these Nickel coils? Should I leave it at the same setting for regular coils? How do I get to joules? Where should I set those? Ok, let's just start with that. Is there a place online I can get a tutorial?
Sorry to be like a kid trying to learn to ride a bike, but as anyone that owns one of these things knows, the instructions don't say much. Thank you all for any help given, I know there are some real pros here.  

Hi all
Couldn't find the topic on VW mods
so I thought I'd post my question here..
I have two IPV4's that have been great running kanthel builds in the power mode,
but I really don't see a difference running the NI200 Atlantis coils in joules mode using the Temperature Control feature of the IPV4..In fact I get a burnt taste in the Atlantis after vaping a tank of juice running the .12 ohm NI200 coil from Vapor Shark..
Now the mod hits great with the kanthel coils in the Starre and Herkakes sub tanks and is great with the .2 ohm kanthel build in the Dark horse at 65w (power mode) but so far TC has been a real disappointment for me

sent from my XT1080 via Tapatalk  

I used to be one of those who thought the whole dripping thing was dumb.

After getting tired of buying coils for my atlantis, I decided to pop in to the store and pick up my first RDA.

I settled on the dark horse. I watched a short tutorial on youtube and built my first coil at 0.6 ohms.

Safe to say the atlantis and nautilis will go into retirement today.

I have never felt a nic buzz from vaping, but I can actually feel a buzz off this thing : I vape my atlantis at 3mg.

Also I love that I simply have to re wick and drip to try new flavours, and best of all NO MORE BUYING COILS.  

So while home sick (yes I was actually sick) today, several reviews sold me on the SMOK TCT pro as THE tank for my IPv4. I was looking for a high watt tank that could also make use of temp control. Didn't want another Atlantis and the Kanger subtank is good but it's just not quite enough for me in temp control mode. Anyone have any experience with the SMOK TCT or VCT pro tanks? Please share!  

so in my pursuit of vaping above 200 Watts I made a fuse 3x24ga gauge wrapped with 36 gauge and I tried three coils. it came out .07 I Vaped it at about 375 watts it was a hot vape but the ohms were very low so I had a problem with power my DNA 250c was reporting 65 amp output so I took that and put in dual fuse 22ga gauge wrapped with 36 gauge I ran that build triple coil I used it at about 250 Watts. what I am trying to do is vape at about 300 to 400 watts with an ohm or .2 to .3. the inner diameter will be 5.5 or 5 mm I'll be using the kanthal core wrapped with 36 gauge and ni80.I'm trying to figure out what my next bill should be to try to vape above 300 watts the restrictions I have is it can't be below point 1 ohm or above .3 ohm I have two aromamizer plus has with the series deck The parallel deck a second parallel deck and a single coil deck. The single coil deck fit 6.36 mm.

I also have the aromamizer titan.

What gauge would you Clapton?

Sent from my HD1907 using Tapatalk  

Hey all. Just started using the Kanger occ ni200 nickel temp control coils a week ago. Been vaping the first one about 430 f 20-25 joules. Checked it tonight and the coil looks gunked up as well as the flavor lacking a bit. What kind of usage do you guys get out of these? I heard one person say 2 days?? How long do yours last?  

When I first started vaping I always swore off building and dripping. I liked the ease of filling and vaping away. About 3 weeks ago I picked up my first rda. (Mutation x v4) it was ok and it leaked something awful so I set it aside. Well after watching mike vapes review of the troll I decided to pick it up. Just got it in today and threw a dual coil 24 gauge build in it. .came out to .34 ohms and vaping it at 60 watts on my m class. I haven't been able to put it down. I think I'm officially hooked on building and dripping. So glad I picked up this rda. Juice well is deep, holds lots of juice. For anyone who has been considering it, I'd recommend you pick it up. Here's a pic of my setup just for fun. I love my M class too! Vape on my friends!  

Hey folks,

Have been getting into vaping on temp control (DNA40) devices with Nickel Wire builds in RDAs. Does anyone have experience with cleaning these builds to extend life? You can't dry-burn Nickel Wire the way you can Kanthal so I haven't figured out a way to clean these builds other than rinsing as well as possible and rewicking.

Hate the idea of having to rebuild every time but if that is what needs to happen I'll do it.  

does anyone know If you can put the new atlantis v2 coils in the first atlantis?

and also if you can put atlantis v2 coils in the horizon tech arctic tank?