Bc Box Mods

Has anyone ever heard of or used one? I'm looking at a 26650 parallel box mod. Any other recommendations for a 26650 box mod that don't cost a fortune?

Dual 26650 Box Mods & More - Lifetime Warranty | Dual 26650 Box Mod *Parallel*  


Similar Content



26650 Orchid V4

Does anyone know where I can buy a 26650 Orchid V4? I prefer a US vendor just because of the overseas shipping prices.
Thanks in advance!  

Making Variable Voltage Battery Powered Supply For Silver Plating Small Parts Need Help

I am not sure where this should go but this was the best place I could see. Anyway I need a bit of help here it should not be too hard. I am look to build a dual 26650 variable voltage cordless power supply for electroplating small parts . I need to be able to vary the voltage from about a .5 volts to 3.5 volts if it possible average voltage about 2 volts I would like it to compensate as the battery runs down a bit don't have to perfect but just help it keep the voltage steady so it will need to have a volt meter I see those all over in the diy mech mods
So I want to use a dual 26650 battery sled
A 1 amp usb charger port
I need a project box big enough
digital volt meter
I would think a mosfet to vary the voltage with a potentiometer
resetting fuse
and I would guess A piece of that project board stuff with all the hole in it like a for building stiff like this on I can't for the life of me remember what they call that board I built small projects on this stuff when I was kid so that was some time ago LOL it just a board with lots a little hole in it it's a sort of a PCB

I have a basic idea for this thing but last time a built any kind a power supply it was in high school and I am 53 now so I am rusty as Hedouble toothpicks LOL. So I really use a bit of help from someone that is good with this stuff I am sure I can build it that not the problem is getting the right values and wiring diagram and finding sources for the parts I sure one I have a wiring diagram and the values I can google most of that stuff but tips pm someplace maybe you got stuff from that has good prices and don't take a 100 year to ship LOL

In the end this will be the power supply for a silver plating with I have hope to maybe add some little videos picture and stuff of it. this will be kinda fun and I want guys to see how easy and cheap it is to electroplate silver for your box mod so when I done with the power supply I will do a tutorial help fold out in return for help with this
I will be doing stuff like nickel silver platinum. even gold plating

Any help with this would be great if it works out maybe I can plate some small parts for you as a thanks  

Help! My Mech Mod Won't Work!

I have a hades 26650 mechanical mod and I was running a tobh atty v2 dual vertical coil build. It was working perfect but I was getting tired of dripping. I bought an aspire Atlantis, and it won't fire. I feel as though it's my mod, because I was fumbling with some adjustments on it, and it fired for about seconds. I was very happy with the production and flavor. But, now no matter what I adjust or anything, it won't fire anymore. I cleaned the connections and everything. Please help!  

Any Good Parallel Box Mods You Recommend?

I currently have a series box mod but was looking into getting a parallel. I'm looking for something that's either simple and clean looking or unique design and clean. However both to be good in performance? Or is every parallel box mod the same?  

$450 What Would You Buy?

If you had $450 to spend on vaping equipment, what would you buy?

Currently have an authentic Hana Modz V3 - Plume Veil - Little Boy - Tugboat V1- Kayfun Lite - Boss 26650



Vaping⚓Sailor  

New Mod

im looking for a new mod budget (50ish dollars) would this $47.37 ATHENA Smart-60PB VW Variable Wattage APV Box Mod - 5-60W / 1*26650 / aluminum / black at FastTech - Worldwide Free Shipping be good, and do i need to get any batteries for that i currently have 2x of 18650 batteries  

Luxyoun Mac 150 Watt??

So I was doing some research on what my next mod will be for my new sub ohm tank with its .25 ohm coil and my decision was originally between a Sigelei 150 and a Smaug 150w but then I went to Luxyoun's website and saw the Luxyoun Mac 150 Watt. I thought for sure I would have to go with a box mod to get over 100 watts, which I originally hated the idea of because I would much rather have a cylinder mod. I can't find almost any information on this device so its hard to decide whether to get it or not. I think cylinder mods look wayy better than box mods and are way easier to carry and feel better to hold so this might be the perfect mod for me. It uses one 26650 battery so there will be a long battery life and a high amp rating unlike a 18650 cylinder mod. I know it will be thicker than a 18650 cylinder mod but I'm fine with that over a box mod. Does anyone know of any cons about this mod? If you know anything about this device please post because I can't find a single review on it. Thanks!!

Link to mod on Luxyoun's website: http://www.luxyoun-ecig.com/product/mac-150w.html  

Voltage Sag

An online vape shop here at Greece at the description for dotBox Dual Mech mod says"

"Switch to Parallel Mode for longer Vaping time and exceptional power from two 18650 batteries".

The dotbox dual mech has the option to select series or parallel connection via a switch.
I send them a email that this doesn't apply (for the same power output always),for example 0.1 ohm coil in parallel connection and 0.4 ohm coil in series connection.

Two batteries in series provide the same amount of watt hours a parallel connection does.

The vapeshop replied and told me that the description is copy and paste from Dotmod.com

Indeed.
QUOTE from dotBox Dual Mech - dotmodretail
"Last Longer. Switch to Parallel Mode for longer Vaping time and exceptional power from two 18650 batteries".

The vape shop also said that the voltage sag at parallel connection is spread out over the two batteries in Parallel.Thus more vaping time than using a series connection.

Okey I made the calculations for voltage sag using for example two Sony VTC5A 18650 batteries with a DC Internal Resistance = 18.6mOhms (0.018 ohm).

I got the same voltage sag 0.378 V in both configurations (0.1 build in parallel-0.4 build in series).

Am i correct or am I missing something?(i'll send to the vape shop the link for this thread so they can read your opinions because i think they believe i'm talking bulls..t!  

Series & Parallel

I know with regulated mods it doesn't really matter, but I'm just curious. How can I tell if my regulated mod works in series or parallel. I have the Aegis Legend 200W.  

I Think I’m Ready For Mech Mods!

Hey Guys,

I have been wanting to use a mech mod for quite some time now. But I didn’t want to rush into things, given that they can be dangerous if not used properly.

To prepare I have studied ohm’s law and have a pretty decent grasp on it. And have a calculator app on my phone.

I have checked out Mooch’s battery recommendations and have a good idea of what batteries to use and which to avoid.

I still do have a few questions I was hoping an experienced Mech user could help me answer:

- What would be the “sweet spot” as far as resistance and safety go for a dual coil set up? Obviously I want to go as low as possible and have a hard hitting vape. But I also want to be safe. I plan to use a dual 18650 Parallel mod (The Clutch X18). I would be most likely be using Sony Murata batteries as I cant find any Samsungs where i live. I’m thinking somewhere around 0.17-0.2? Or would it be safe to go lower than that? I will of course test my build on an ohm reader and regulated mod before throwing it on the mech to be safe.

- Are there any other general safety tips? Ive heard that you want to screw the Atty down all the way first, before inserting the batteries. And then insert the batteries. And when removing the batteries i heard you want to slightly unscrew the atty first, and then carefully remove the batteries? Can anyone please confirm if this is correct.

- Is its safe to chain vape on a dual 18650 parallel mod? When I say chain vape I mean like maybe taking 5-6 big hits back to back. Then waiting 3-5 minutes, dripping some juice and then doing another 5-6 hits.

- Is there anything I should be monitoring while I’m vaping? Like the heat of the batteries? From what I’ve read, the batteries drain quite fast on a mech. And after some experience you will just kind of know when they need charging because the vape experience changes. Is there anything I’m missing? Or something i should be looking out for?

- I can only vape in my kitchen. And sometimes there might be a little bit of water on the counter from someone’s drink sweating, or drops after someone washed their hands etc. Is this a risk? I will of course do my best to keep all surfaces dry. I’m not talking about large amounts of water or submerging or getting the mod really wet. But just what one might find on a kitchen counter.

- Any other tips you could throw my way would be great!

Thanks in advance!