Best Dropper For Trying New Flavors

I recently got 30 samples I don't want to waste coils tasting them. Can anyone recommend a simple device (I think it's a dripper) to sample new juices?  


Similar Content



Salt Nic 50mg .6 Coil

I ordered a geekvape Aegis Boost Pod-Mod I read on a site that it is a salt nic device and ordered a kit that had 2 juices that came with it. The juices that came with had the option of 30mg and 50mg. I also ordered a few more juices and replacement coils. Iwith the higher mgs because I smoke and when I don't smoke I have a chew in. After doing some research i seen you can't use that high of mgs in a sub ohm device. The coils it came with are .4 and .6. Did I waste my money or can I use 50mg vape juice with the geekvape aegis boost  

Diy Salt Juices And Diy Coils

So I've got a bit of a convoluted question. I've been vaping for about 8 years and followed most of the trends. Spent a fair amount of time in deep subohm territory with freebase juice, low nic levels, lots of thick flavorful clouds. Over the last two years I've gravitated towards the salt juices with the tiny mods and PIP coils. The cost of replacement coils is getting annoying when combined with the cost of salt nicotine juices in comparison to the freebase bottles I used to buy. To address this I've tried building my own high ohm coils on the SMOK Rpm rebuildable head. Results have been less than satisfactory.

For what ever reason, even when I can block the airflow and build a high ohm coil..the flavors in salt nicotine always taste awful, nothing like what they taste like in the rpm 1.0 coil. As near as I can tell, the only reason I can think of is the different style of wicks..inner cool wick for a DIY vrs outer wick for the smok prebuilts.

This got me thinking of building a juice that's a bit heavier and smoother with a higher vg content and flavor content to work in a DIY coil (prob something simple like a single 26-28 gauge spaced wrap) but still pack some of the nic punch (sans throat hit) as a salt based juice..and will still work in a pod device. I'm thinking it would probably need to be in the 12-15mg nic range to get a similar buzz as the 25-35mg nice I usually vape at low power.

Is this even feasible..or are the flavors and thickness of the old style free base juices incompatible with salt based nicotine? A 40pg/60vg juice with a 12-15mg salt nic level that will work on a .8 single coil at 10-15 watts or so I think. And not taste awful.

In my state it's becoming problematic to source flavors other then basic tobacco.. so it might be time to go strictly DIY with a pod type device.

Thoughts?  

Any Drippers Out There That Take Pre Made Coils?

I recently upgraded to the Istick 30 and Subtank nano, and kinda want to try out a dripper, but do not want to build coils, check ohms etc. Are there any drippers available that take pre made coils? I guess I can wick if needed, but I'm not ready to jump into coil building yet. And if anyone could explain the benefits of dripping over a tank system, that would be great also I know changing flavors without dumping a tank, but any flavor or vapor advantages?  

The Best Things In Life Are Free :)



Most are free + shipping....a few are buy something get free (good deal)
an on going list that i've tried to keep....
feel free to add your own

Vapor Gurus free 350 ego-t kit (with ce4 and usb charger) for purchase of 10ml bottle of juice ($6)
Free greensmoke kit for first time customers only
Real Feel ecigs 3 disposables for free
Vapes.com free gift (it says, with every purchase, but not sure if that really is or not)
Madd Catt: Send Txt Get Free Juice
Grand Terrace Beta Testing Juices
The Vapor Room free sample for first time customers
The Ecig free sample
Vape Genie one time only free sample must register an account
Vermillion River $3.50 sample use coupon code FREESAMPLE to make it free, just pay shipping
Vista Ejuice $3.00 for 5 pack sample
Hurricane Vapor free juice for first time members use code free5promo, must register first before code will work
MadTown Vapor 2 free samples for new customers
Apollo ecigs free sample
Vista Vapors free sample




ECF ONLY
The Vapor Station, 2 Free Bottles of Juice For A Review

[edit]sorry if this is the wrong forum....wasn't sure....figured general discussion (ish)  

Device For 100% Vg

Can anyone recommend a good starter device that will work well with high VG juice?
I am looking for something relatively small that is easy to use. I am not interested in blowing big clouds or anything like that. Just a simple device to get started.
From what I have read pod systems will not work well for this and there are so many device options I am not sure where to start. Any help with this would be great.
Thanks  

Okay So

I have my istick 50...have been using the subtank mini with rba n coils close to bout 1 ohm,good enuf,but get several burnt tasting hits,so local vape guy hooked me up with an dripper ..coil is .3 (need a wider bore tip now tho)nd I don't know what is wrong here but I'm using a 12mg juice nd not rly getting any vapor nd am coughing.I'm still getting the peach flavor he primed the cotton with n not my sugar cookies ..I'm not sure yet the 12 is too strong nd I don't want tht to happen cuz as of now all I have is 12s with 6more I've ordered on the way.Definitely not getting burnt taste but idk.do I need a higher wattage mod? I don't care for clouds but I'm getting real small ones right now which just doesn't seem right. .3ohm 50w(being the max) 12 mrgoodvape moon sugar juice...feeling lost here...not at the shop now nd he's very informative but I feel like I'm missing something,he built the coils n set the drip up for me nd it's all fine,idk maybe for a drip I need over 50w n less than 12mg....I have a 6mg of the same juice just in case as well tho too so...absolutely new to dripping but not sure if it's my device needing to b higher capable or what...which is why I put this in general vaping n not rebuildable anything forum cuz I'm generally looking for ideas on juice mg the bore of my tip,power of device,so it's multiple things on my mind...ideas plz  

Reliable Thick/dark Juice Setup?

Hey, everyone. My gear: MVP, EVOD batteries, Mini PT3, Nautilus (new BVCs) tanks.

I want to be able to vape the dark, creamy, butterscotch, custard, and tobacco flavors that I love so much, but recently my two vape setups just taste terrible no matter what I do. I've grown sick of the sugary, fruity flavors that only seem to work in my setup and so I type this with a lip full of Copenhagen and heart full of regret (I was tobacco free for almost a month). So, what setup can you recommend so that I can get back to vaping those thick, dark juices? I will try RDAs if it is the only reliable way.

Thanks.  

K3 And 0.7 Ohm Coils?

Hi
Just wanted to see if anyone can advise about my Aspire K3 device and whether i can use 0.7 ohm coils in it which i recently bought in error?

Also any recommendations for decent e-liquids for a new user, recently quitting smoking in past 3 weeks and needing to find an e-liquid that gives that throat hit that's talked about so much.

Currently getting by with 'US Red' with slight amount of 'mint' flavour and find that the only time a 'throat hit' happens is when first vaping with the K3 but each time i use it followingthe first 'hit' is very weak. Unless putting it down for an hour then the first use is ok but after is rubbish.

Would i benefit from a larger device like Aspire X30 Rover Kit or EVO75 device (for smoking replacements primarily)?

Thank you  

Personal Progress And Ramblings Pt.2

Continued from he
Personal progress and ramblings

First off, I have no complaints. Happy as ever

I'm using the dripper at 2mg 95% of the time. There is 4-5ml consumption daily. One 18650 charge lasts nearly the entire day. Unfortunately I'm not able to go any lower on the nic or I get REALLY pissy at work. 1mg = pissy and 2mg = potentially rational. Weird, isn't it?

All I can do at the moment is vouch for what I'm vaping and possibly it will help someone.

The blue box is a diy dna40 with a fatdaddy connector . The dripper is a Veritas with a dual series coil (28g/2mm/14 wraps total) and Japanese cotton. Runs at 23W/400deg.
The black box is a lipo vaporshark version with a dna40 and fatdaddy connector installed. No problems but I would not suggest this particular route for anything but a backup. Runs at 7.7W/420deg. The kayfun has (32g/2.5mm/6 wraps)

All of the juices are DIY. I put in a blog entry with how I'm doing this.

All of it has worked flawlessly in the recent months. This is what I'm really happy about.....I've actually left the wick in the dripper for six weeks. I never thought things would be this easy. All it needs is fresh charges and juice otherwise. After six weeks the cotton gets thin inside the coils and the coils themselves get buildup. I probably could have let it go for another two weeks just fine. Hard to beat the veritas for a carry dripper. Sure, there is some occasional "sweating" but no wet spots on the pocket.

The goal still remains...how to get to 0mg without loosing my job?  

Help With New Falcon 2 Tank?

Hi I recently purchased the Falcon 2, using it with my aegis Legend. I’m new to vaping, so inexperienced. I’ve just burnt through two coils in two days. I keep getting nasty tasting e liquid in my mouth aswell as the coils burning super fast. Maybe I’m priming wrong, I’m also vaping straight at the recommended wattage (70w). Can somebody help, thanks.