Sub Ohm Tank Question

I know, I know... this topic has been discussed to death. And, I am in the process of searching now.
I have a TFV8 tank that started leaking a week or two ago. I tried all the usual tricks (empty and clean all parts, don't over tighten, replace o rings, etc). Nothing helped. After a few days of covering the mod with a paper towel everytime I took a drag, I decided to buy a new tank. The new TFV8 arrived yesterday afternoon, and after checking it out and filling it with juice, it is doing the exact same thing.
We are not talking about a drop leaking here and there, it is leaking the whole tankful in less than two hours.

Any suggestions?

Thanks!

Sent from my SM-G965U using Tapatalk  

I've been out of the small scene for awhile, relying solely on dripping or my latest journey...searching for the ultimate sub ohm tank.

Anyway, my wife has been dipping her toes back in the vaping waters, and I have a Tatroe Tank set up for her on a iStick 20W. The problem she's having is leakage from the coil. We've already got a number of Kanger Protank 3's in the collection...but they are prone to leaking.

What is out there now, tank wise, that offers 1.8 ohm or so range that is pyrex and doesn't leak? Pyrex or SS is a must, as she like high cinnamon juices such as High Caliber's Flame Thrower. She also vapes as if she's smoking...mouth to lung hits. She likes the tight draw that mimics a cigarette, and would rather have the smaller diameter drip tips like those on eGo and Evod style tanks  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

Maybe you guys can help I vape 70 VG 30 pg juice and use I believe the 0.7 nautilius coils with a aspire tank and been noticing some leakage and spitfire but have my wattage set around 10.3 and 11.3. Never had a problem before but is it possible that I bought two bad 5 pack coils and that's the reason for the leaking and suture before that I never really seemed to have a problem?  

RDA gave better flavour,but why would people prefer RTA over sub ohm.I have experience of building a RTA,but it’s very troublesome to change flavor and you need time to rebuild.Unlike sub ohm tank,you just change the coil and the percentage of leaking is so low compare to rebuilding a RTA  

I haven't been having much luck with the two egrips I ordered. The first had broken plastic on the inside (little bits of plastic were caught in the threads, and had probably fallen into the tank). Number one is on its way back to the vendor.

On number 2, the atomizer base won't sit flush with the bottom of the device, and I think it's causing all the gurgling and leaking (e juice was also leaking out of the bottom of the device). I tried taking off the atomizer head and reseating it, and that didn't work. I'm hoping a new base might fix this problem. Any ideas?

Both devices are brand new. When I ordered the first one, I wasn't aware that it was available in a wood finish, so I ordered the second one.  

Hello all,
I’m sure this has been discussed before as this is not a new tank, but after doing a search I didn’t find an answer. I also didn’t find much help on YouTube. I just pulled out my 2k18 doggystyle (I think that’s the correct version, it is a top fill) and built and wicked it. It has been so long since I bought this and read up on it, I don’t remember any of the tips and tricks.
As soon as I adjusted the airflow, ejuice started leaking in large amounts out of the holes. Luckily I was able to salvage most of the juice as it was premium juice I just bought from a store (not diy). What did I do wrong? Is it a wicking issue or is something else wrong? Any suggestions are greatly appreciated! Sorry if this has been covered before, but didn’t know where else to ask and I want to get this tank to work.  

i just noticed there is like a gash on the glass part of my tank i was just wondering if i could do to fix it instead of having to go out and buy another one (so it won't leak)? like tape or w/e

it is on the outside and is not leaking ATM  

I don't know if anyone has issues with their protank 2 but I hear a lot more negative than positive on them. I was messing with one of those bootleg ones and I couldn't figure out why it kept on leaking. Now just yesterday a friend gave me his protank 2 and Im guessing it was because he was tired of it leaking. When I first took it apart I took all the pieces off and connected them all again one by one making sure it was air tight as I added each piece. Everything was air tight until I got to the coil. I was taking a drag off it and it immediately started leaking and I was like why the heck does it do that? I noticed that it was leaking from between the coil and atomizer where the two little airholes are. What I did to fix this was take an old coil and gently pull off the little silicone ring (above where it says the ohms and below the wick) then I dropped it into where the coil meets the atomizer. After I just screwed in my coil and it works perfectly. No leaking whats so ever! Very good cloud production so far I recommend trying this if you have one. Sorry if someone already wrote this but I did a lot of looking around and never found an answer. Also didnt know where to post this so I apologize if this is the wrong section.  

My friends been vaping for a couple months now and when she started she got a buck naked skinny. recently the tank that came with it started leaking, I'm pretty sure the tank that comes with it is a disposable correct? What would be a good starter kit for her?