Are All Mosfets The Same?

Some people build and drive them. Others do this:
400w 80A Delta - Imgur

Specs:

80A/400W Delta Delphi DC/DC Converter with custom designed breakout board Red Powdercoat Diecast Aluminum Hammond 1590BBS and N52 Magnetic Door IRLB3034PBF MOSFET switching Venom 3S 40C 2200mAh LiPo Battery Pack with XT60 connector Low Profile FatDaddy v4 Spring loaded 510 connector  

Does anyone have any experience with https://www.darthvaper13.com/ and their products? I was looking at some of their mods, and I really like them, but I'm not sure how well they are built. I don't know too much about mosfet. Only the basics. All my mechs are straight mechanical buttons. I don't want to buy a mod and the quality isn't too well. ie. Warm chips, buttons, batteries discharging unevenly.

I was not able to find a lot of information on them online.  

Ok, get your yuks on.

I just did the happy dance because - I did my first modification of a component. I drilled out the air hole on my RSST Pyrex.

I'm progressing... Factory standard basic gear -> better standard gear -> rebuilding coil units -> rebuildables -> modifying.

Now, where can I find chipsets and mosfet switches...

J/k I'm gonna try DIY joose before I try to build anything. Better to give myself a nic OD than blow myself up, right?  

So, I was traveling for work today, and I had to stop at a gas station to grab a drink and use the restroom. As I was checking out, I overheard one of the other customers asking the clerk if he had any vapes. The clerk told the customer they only had the Vuze e-cigs. The customer was bummed out because he had forgotten his setup on the counter of a vape shop in Sacramento, which he was sure was gone by now, saying "Those things aren't cheap," and I told them I know all about it, lol. He was waiting for some food he ordered to be ready, so I went ahead and made my purchases and went outside to take a vape break. When he came out, he lit up a cigarette, having succumb to the urge and the not having a vape. We got to talking, and he told me that he was a veteran, having been discharged after his Humvee was blown up by an IED, leaving him with a TBI - Traumatic Brain Injury. He has a hard time remembering things, and that was part of the reason he left his vape behind. He told me he was using a mechanical (I deduced that after he told me it was a metal tube with a button on the bottom) with a cheap clearo that had a very tight draw. He didn't really know much about vaping, he just knew that it had help him go a month without smoking. I showed him my setup - a Smok Xpro M80 Plus with an Artic tank using the .2 ohm coil, filled with Vape Wild's King Cake at 65/35 VG/PG 3mg nic - and he was pretty impressed. I let him try it out, and he was just blown away by it. He really enjoyed how well it hit, how much he could taste it, and how much vapor it produced, saying he could really feel the nicotine, even at 3mg. He told me a guy at the vape shop he goes to gave him a box mod, and he showed it to me, a simple unregulated box mod - an 18650 Hammond box with a missing back, no MOSFET, no nothing. I told him he should get a couple batteries and find a back to go on his box, even told him I would be on the lookout for one. I also gave him one of my drippers, a TOBH Atty clone, and told him about coil building, and how drippers work. I also gave him a couple bottles of Vape Wild's Dragon Juice 3mg, 65/35. The last nice thing I did was to tell him about this place, telling him that everyone here is more than happy to help answer any questions he might have, and to give him some advice. Anyway, just wanted to tell you guys a little about my moment of Vape It Forward tonight. Hopefully he ends up showing up here someday. Support the troops, guys and girls, they need it.  

No wonder they breed potential politicians at ebay. This is a snippet of the text contained in a email a friend of mine got over the weekend:

Due to strict government regulations, eBay doesn't allow the sale of most tobacco products. This includes cigarettes, cigars, herbal cigarettes, and smokeless tobacco. E-cigarettes also aren’t allowed on eBay. We realize e-cigarettes don’t contain tobacco. But due to a lack of globally consistent or clearly established regulations for the sale of these items, eBay has made the decision to not allow the sale of e-cigarettes or their components.

So, since its NOT regulated as of yet, they`ll regulate it for us??? And yet the "other stuff" paraphernalia runs rampant on ebay. That and other things you would`nt want to try and explain to your 6 year old. Like that knitted sweater for a pickle.
God Bless ebay, they`ll be the Vaping Heroes for us all and help make our decisions for us, cause we are just too slow to understand or comprehend the nature of our actions.
Also, you can buy ANY flavor of juice (especially the "other stuff" flavor) you want on ebay, as long as it is zero nic. But what are you going to vape it with? You can buy the juice, but you cant buy the vaporizer. HOW is this LOGIC agreeable to anyone?


The most scandalous entity on Ebay, is Ebay itself.  

I am not sure where this should go but this was the best place I could see. Anyway I need a bit of help here it should not be too hard. I am look to build a dual 26650 variable voltage cordless power supply for electroplating small parts . I need to be able to vary the voltage from about a .5 volts to 3.5 volts if it possible average voltage about 2 volts I would like it to compensate as the battery runs down a bit don't have to perfect but just help it keep the voltage steady so it will need to have a volt meter I see those all over in the diy mech mods
So I want to use a dual 26650 battery sled
A 1 amp usb charger port
I need a project box big enough
digital volt meter
I would think a mosfet to vary the voltage with a potentiometer
resetting fuse
and I would guess A piece of that project board stuff with all the hole in it like a for building stiff like this on I can't for the life of me remember what they call that board I built small projects on this stuff when I was kid so that was some time ago LOL it just a board with lots a little hole in it it's a sort of a PCB

I have a basic idea for this thing but last time a built any kind a power supply it was in high school and I am 53 now so I am rusty as Hedouble toothpicks LOL. So I really use a bit of help from someone that is good with this stuff I am sure I can build it that not the problem is getting the right values and wiring diagram and finding sources for the parts I sure one I have a wiring diagram and the values I can google most of that stuff but tips pm someplace maybe you got stuff from that has good prices and don't take a 100 year to ship LOL

In the end this will be the power supply for a silver plating with I have hope to maybe add some little videos picture and stuff of it. this will be kinda fun and I want guys to see how easy and cheap it is to electroplate silver for your box mod so when I done with the power supply I will do a tutorial help fold out in return for help with this
I will be doing stuff like nickel silver platinum. even gold plating

Any help with this would be great if it works out maybe I can plate some small parts for you as a thanks  

This is what you get when you search "mod" on ebay /








LOL just LOL  

What is your go to single coil build in terms of gauge wire, diameter, and number of wraps : (no fancy Clapton or twisted build just a "regular" wrap)

And if you have a reason please include it: For example: "I'm a flavor junkie and this is best flavor build I've found" or "I like short ramp up times" etc ...

(I know preferences may vary greatly)

Thank you very much

:


Sent from my iPad using Tapatalk  

Hi all
would just like to share my new experience with you all.Just started doing single parallel coil build(24 kanthol,4-3wrap)and have to say its pretty good,the beauty about it being that I can keep it firing a bit longer than usual and get some nice clouds lol.Love this vaping,always something new to try ha.
 

I currently have a series box mod but was looking into getting a parallel. I'm looking for something that's either simple and clean looking or unique design and clean. However both to be good in performance? Or is every parallel box mod the same?