Dna 40 Mod For Kanger 0.15Ω Coil ?

I am running my Kanger Subtank mini rba deck on .9 ohm (spaced 4 wrap 28awg IIRC) at 13 watts and it is cloudy and flavorful. The OCCs were fine but I prefer the rba I think (even though I'm still a bit of a build novice). Many others seem to run it at 25+ watts and lower resistance. I had it at .5 Ω and ~19 watts was good, had dry hits above 23 watts. Now have dry hits above 15 watts at .9 Ω. I'm still playing around, but this current build/wattage is working awesome.

Other important factors:
Tobacco and vanilla DIY juice 4mg 50/50 PG/VG Organic cotton, standard wick Only had Subtank for 3 weeks Coming from BCC clearos Been vaping for 6 years Used to be mouth-to-lung, doing a lot of direct lung but still switching back sometimes What's your style with the Subtank? How are you running it? What's your wick-style? Dry hits? Wattage? Ω?  

Hello,
Does anyone know why with the original Subtank mini the coils that came with it were
a .05 ohm coil and a 1.2 ohm coil i have noticed with the new subtank it comes with a .05 ohm coil and instead of the 1.2 ohm coil it comes with a 1.5 ohm coil
does anyone know the reason for this
thank you  

I've yet to buy a VW mod but i will be soon. However the outcome of this thread will dictate which one i go for.
Ive been looking at a few:

MVP 3 Pro (60w mod)
Itaste 50w mod
Coolfire 4 40w mod
Kanger Subbox Mini

For arguments sake lets say you have a 0.5ohm stock coil in an Isub G tank on the Istick 50w. You also have a 2ohm stock coil for it.
The mod is capable of supplying 50w to both the 0.5 ohm coil and the 2ohm coil. 50w is 50w right? So what, if any, is the benefit of putting a sub ohm coil in the VW mod?
The manufacturers market them as sub ohm mods, but why go sub ohm if the device is capable of the same wattage on a 1+ohm coil, the experience would be the same?

Which leads me to a similar question. Would any VW mod from say 30w capable to 60w capable basically give the exact same experience for the majority of users assuming the same tank is fitted?

I'm quite new to this but i hope my question is understandable
Thanks  

I am new to the mod world and I entered the foray with an IStick 30 and a Kanger Subtank Mini. When I use an old cheapo tank that came off an earlier Ego my juice taste fine. It's a 2.7 ohm coil set at 7.5 watts at 4.5 volts.The problem is the taste with my Kanger hooked up. It is very harsh. I also do not get the same visible exhaust (sorry, but I can't think of another term ) I operate it at about the same watts. I have tried both a sub ohm coil and a 1.2 ohm coil. I have also tried different air intake settings. One thing to note: The cheapo tank gives me a much tighter draw (It's harder to draw in the air). I have adjusted the Kanger down to the smallest inlet and the resistance still seems very easy.

Would the difference in resistance of the coils affect the taste with running the same power. Do some juices just not taste good with different tanks? I must be doing something wrong. Maybe I assembled it wrong by leaving out something but for the life of me I can't see what? I did insert a little piece of cotton in one of the coils which was foreign to me.

Any ideas? Fire away and don't assume anything. Again, I am ignorant with these mods so I am learning here. Thanks a bunch  

So i had mvp 20w, and the kanger subtank worked fine with 1.2ohm occ at 11-12w.

Just put it on the mvp 3.0 and does not fire. Does not detect ohm ( blinks like this "-.-")

what gives? I tried with kanger pro tank 1.8ohm coil and it works great.  

How are they working for you taste and vapor production wise compared to the .5Ω ones?  

So I decided to try a 1,6 ohm coil on kayfun v4 clone Tobecco and I am using 28gauge Kanthal with a cotton
wick on a Rdna 30 and its vaping well at 15 watts I have a kanger subtank mini coming in the mail and here goes my question
So the kanger subtank states that with a .5 ohm coil i could vape up to 30 watts but the voltage comes in at like 3.8 volts
I was under the impression that the rdna 30 needs at least 4 volts to work which kinda brings me to my second question
What is the point of of sub ohms? cant i just build a 2.0 ohm coil or something like that to achieve the results as if i was subohming
I am very confused on this
thanks for the replys in advance
Oh yea is a 1.6 ohm coil at 15 watts a normal build or any recommendations for the kayfun v4 for watts and ohms thanks again  

Hello all!
My question is this. I have upgraded every step of the way. Started with a cigalike, moved to a kanger evod, to a vision spinner 2 with dual coils, and now I am at the joy tech ego one.
I really love the ego one and thought that would be it for me. Done.( Lol.
I have said this for each one of the above steps.)
I see so many people with box mods now. I don't mean to be offensive but, I simply am not crazy about the way they look. I have been certain… That I will not move up to that. Especially with size being such a big issue for me.
But ..
I see this new Kanger sub box mini as it looks really neat. I love the look, but even more.. the size.
So going from My ego one… to a box mod. ..
Yes.. I am aware that I will be able to do variable voltage. Different tank, etc.
I don't sub ohm. Don't like it. Tried the .5 coil on the Joytech and its not for me.
So would I really get a much better experience with my favorite juices with the kanger sub box mini than from my Joytech ego one?..
Many thx  

okay, so i had a problem yesterday where i would keep getting juice popping up on the draw, that problem is solved, however, now on only the second day of light use, on the 1.2 ohm coil that came with the tank i am getting a pretty harsh smokey taste. Its not overwhelming like it is when a coil is burnt out, just an unpleasant taste. I did 4 drops of liquid on the coil before using, everything is screwed in tight. Do i need maybe a couple more drops on the coil?

FYI: using an istick 30w burning at about 14.5-15w  

Hi, I have having issues with the kanger subtank mini sucking hot juice into my mouth with the rba deck it doesn't happen with the occ coils please help....