Lemo2 Wire Gauge

Hello so as of now I have a 100 foot roll of .26 gauge kanthol that ive been using litterally ever since i started getting into rebuildables. I have been looking for some thicker wire, and i was thinking .22 gauge but idk just wanted to hear what gauge you guys vape with!  

My buddy wanted me to show him how to wrap up some coils. Hes using a vamo v5 and he bought an orchid v3. He doesnt like harsh draws but rather a smooth, light, cool pull. So i decided to try that standard wire that comes in the orchid v3's package. Its that stock, hair thin wire that comes in the box with most of your typical RDA's RTA's, but i cant figure out the gauge dimension on it. Im trying to get him a whole roll of it so he can wrap his own. If you guys can help me out i would appreciate it. Thanks!  

I never used anything but Kanthal and Nichrome wire to build my coils.

All things being 100% equal (wire gauge, coil type, coil diameter, ohms, etc) do SS coils require more power to run to get the same vapor as the exact same coil/resistance made from Kanthal or Nichrome wire?  

Just a little warning to all who have purchased the Lemo 2- Do not use the wire included in the box.
I was a little worried when i was using the stock coil and noticed it had been turning a green color after a few days of use, not sure if this is the case with all Lemo 2's, but if you notice your wire is turning greenish, just throw it out and replace it. I don't believe this is kanthal, it could possibly be nichrome, but it's properties are not matching up with those of kanthal. My worries were confirmed when I decided to put a parallel 5 wrap coil on my rda with that wire because of my lack of other 24 gauge... Well today when I took out my cotton and dry burned the coil a little to rid it of excess juice, the coil actually deformed and somewhat melted on my rda . I don't know what kind of metal this is, but I'm positive it is not kanthal, this has never happened to me with kanthal, and this wire seems to be of a lower resistance than kanthal. Anyway, just wanted to let ya'll know to be careful with that wire, or just throw it out altogether. Otherwise, the Lemo 2 is a fantastic tank  

So..hmm.what gauge shud I get? I'll b having the prebuilt coils n I want the wire to learn to build a simple coil,any recommendations on sites for high length cheap price? I've heard higher resistance for beginners so maybe what 1.5 ,2ohms? Help me!  

Hey guys,
Just wanna drop in and say I ordered a Lemo2 to try my hand at rebuilding. It come with a coil and wick at .5ohm already in place. This thing really works awesome... tons of flavor and vapor and can even MtL hit if I dial down the air almost all the way. I do have two hopefully easy questions I'm sure someone knows the answer to...
How high of wattage can you push these or any handmade coil to? Also when you wick a new one, since it doesn't come with much info on it, how do you know if you're putting too much cotton in, and is there a trick to get the cotton right where it needs to be in that little wicking channel from the tank to where the coil is so the juice gets absorbed quickly and properly but without flooding it?
TIA and I know I'm know pro sub-ohmer by any means lol but for someone thinking about one this tank really works awesome.  

I’m a mouth to lung vapor and currently using the holic rda and galaxies rdta. I’ve tried using ni80 round wire and superfine mtl fused Clapton ni80 wire. The round wire is so easy to work with and the superfine is harder but I’m getting the hang of it. My question is with coils that ohm out the same with each wire I get flat flavor with the round wire and the flavor definitely pops with the fused Clapton wire. Is this normal? Same juice, same wattage, same ohms and same rda and squonk.
I love working with the round wire but not worth it if I can’t get better flavor.  

so in my pursuit of vaping above 200 Watts I made a fuse 3x24ga gauge wrapped with 36 gauge and I tried three coils. it came out .07 I Vaped it at about 375 watts it was a hot vape but the ohms were very low so I had a problem with power my DNA 250c was reporting 65 amp output so I took that and put in dual fuse 22ga gauge wrapped with 36 gauge I ran that build triple coil I used it at about 250 Watts. what I am trying to do is vape at about 300 to 400 watts with an ohm or .2 to .3. the inner diameter will be 5.5 or 5 mm I'll be using the kanthal core wrapped with 36 gauge and ni80.I'm trying to figure out what my next bill should be to try to vape above 300 watts the restrictions I have is it can't be below point 1 ohm or above .3 ohm I have two aromamizer plus has with the series deck The parallel deck a second parallel deck and a single coil deck. The single coil deck fit 6.36 mm.

I also have the aromamizer titan.

What gauge would you Clapton?

Sent from my HD1907 using Tapatalk  

I am looking at buying a large ammount of kanthal from lighting vapes. They told me it was China wire but higher quality then most China wire (whatever that means) and assured me it was A1. I am wondering, anyone use lighting vapes specifically. Would go through Temco but the shipping is crazy pricey on E Bay to Canada and way to long otherwise. Lighting Vapes I am looking at 1450ft of varying gauges for 106$ shipped, wire for life-hopefully literally lol, thats a lot a wire. So, is it as good as Temco wire? I really hope it is and doesnt taste disgusting or whatever seeing as I am getting 1000ft of my primary 24/26g and 450ft of 22, 28, 30 and ribbon haha.  

Hello, so i am thinking on purchasing a sigelei 100 watt dual 18650 and throwing a Hobo v2.1 RDA on top (All authentic of course). I was planning on using .22 gauge wire I am still a tad bit new to vaping but just want to hear yalls opinion! shanks