Whistling With The Delta 2

Hey guys how does the delta 2 rba vape with max vg? any dry hits? i usually dont bring up the wattage too much probally around 30 watts thank you keep in mind i am talking about the rba base not the jfc coil heads  

Some people build and drive them. Others do this:
400w 80A Delta - Imgur

Specs:

80A/400W Delta Delphi DC/DC Converter with custom designed breakout board Red Powdercoat Diecast Aluminum Hammond 1590BBS and N52 Magnetic Door IRLB3034PBF MOSFET switching Venom 3S 40C 2200mAh LiPo Battery Pack with XT60 connector Low Profile FatDaddy v4 Spring loaded 510 connector  

I know y'all are the experts.

My husband and I are planning a trip to Cancun this fall. We're flying Delta. I know that Delta allows vape gear in carry on luggage.

However, I do not know if we are allowed to have our gear once we arrive at the airport in Mexico and/or return home from Mexico. I cannot find a definitive answer online.

Do any forum members know the answer? Has anyone traveled to Mexico recently, and what was your experience?

Btw: Preemptively stressing about this. My husband and I have been cigarette free for many years now, but we have never gone without vaping for any period of time.

Thank you!  

I am looking back at my spending this month, and I've realized the thing I used to get off tobacco and save money is now my full blown hobby and obsession. Bad? Nah - but it was eye opening and shocking! Recently (past 2-3 months) I've bought (this is just hardware. If I listed juices, this post would just be dumb long)

IPV Mini
IPV Mini V2
iStick 30w
Nitecore I4 charger (I2 became not good enough)
4x efest 18650 batteries (to add to the 4 I already own)
case to carry them all in while on the go
Atlantis 5ml extender
20 Atlantis coils
Delta II
10 delta II coils
Delta II RBA
Sense Herakles Tank
10 Herakles Coils
Horizon Arctic Tank
Pre-ordered Lemo II
Melo Tank
22ga, 24ga, 26ga, 28ga kanthal
ceramic tweezers
eleaf atomizer checker
wraps to protect/customize all my mods
Vape Life Drip Tips
Subtank Mini
Subtank mini OCC coils
Kayfun 4
Coil master kit
Screw driver sets
Torch
Butane for torch

Now I want the High Voltage tank

WHAT AM I DOING?! THE STRUGGLE IS REAL /endrant

My favorite so far: IPV Mini II rocking the Herackles tank at 55w - mmmmm

 

John currently vapes 5 ml a day of 24 mg Nic Juice.

John goes out and upgrades to a new mod and John decides to cut the Nic level in their Juice by half, down to 12 mg Nic Juice.

John now vapes 10 ml a day of 12 mg Juice with their new hardware.

Basically, my question is - Is John consuming the same amount of Nicotine as before, but they are vaping twice the amount of juice and spending double?  

To keep this short I tend to change flavors in my delta 2 quite often and have a large assortment of flavors. That being said I never have enough replacement coils to keep switching them out fresh for flavor changing. I do wash my tank every time I change flavors but I don't wash the base and coil over fear of messing something up since I don't tend to let them dry before I decide to start vaping it again. I usually don't think about the transition flavor however I made the mistake today of switching from a caramel macchiato to a vanilla banana wafer pudding so as you can probably imagine the flavor is complete trash.. With all that cotton in the delta 2 coil, how long should I expect to have to vape like this? Ten toots in and I can still taste the macchiato like the cotton is reserving it just to teach me a lesson.  

So....my lemo was my #1 RTA, until I got the subtank mini and delta 2 (although I haven't tried the delta 2 yet, but have heard very good things about it). I have been sad, because I have put my lemo to the side, because my newer RTAs have more airflow. I would vape my lemo most of the time between 25-30 watts, and could get it up to about 38 watts without a dry/burnt hit. Anything over 40 would give me a dry/burnt hit, which is still impressive. (with my old wicking method)

Long story short, I decided to drill out my airholes on my lemo. I found another guy that had already done this, so I followed his bit sizes. He claims that he now vapes his lemo around 70-80 watts without dry/burnt hits. I had my wisdom teeth out about 3 days ago, so I can not vape as I usually do (in fear of getting a dry socket) so I have had to barely hit my tanks to vape. I hit the lemo, after modding it, last night, at 40 watts with a wussy vape and no dry/burnt hit at all. I can't wait to actually vape like I usually do and see how high in wattage I can go. By the way, I am trying something new and using Drip Trippers pancake wicking method on this as well, and a 0.78 build.

So here are the pics, with the sizes, if anyone wants to do this. It took me about 15 minutes:



4 External air holes (pic 1) - 3/32 drill bit



Vertical stem shaft air hole (pic 2) - 1/8 drill bit


Vertical stem 4 air holes (pic 3) - 3/32 drill bit


Pancake wicking method.

 

hi all just got a joy tech delta 2 am wanting to try lung hits but I only have 10mg juice would this be okay as I see most people do this will 3 to 6mg juice  

Considering a purchase for a temporary case of shiny-itis. Both hold more fluid than my original need of a Delta 2 and neither have the refill issues. Plus they come with the rba. I'm leaning towards the 7ml tank. I'm in need of pros, cons, concerns, and gereral info to guide me.  

Hi guys just placed my order for an eleaf 50 and was unsure what sub ohm tank to accompany.
The gentleman working at vvape recommends the Magnus, I was thinking the delta 2 but was reading about the material in the coils. My friend says go kanger sub and another says Atlantis 2.
What do you recommend ? Not really into rebuilding just wanna get a good cloud with a sweet taste.
Thanks in advance