Hi al I was wondering what would be my best bet to get the must flavor out of my juice. What I have is a eleaf 50w I am useing a kanga subtank mini . I do 5 wrap coils with 26 g kantal . My eleaf reads .6ohms. I vape at 17 to 22 watts depending on the air flow I am useing. Any suggestions on hardware or wires any suggestions will do to get the must flavor .
Hi all first off like to say thanx to everyone who answers my newbie question. You guys been alot of help. My vapeing knowledge is improving. Now I have another one for you guys . I am looking to get the most flavor out of my vapes. I own a ipv4 a mutilation x v4 a tugboat and kanger submini and a eleaf 50 watt. I have 26g kanthal 24g kantal . What is any should I get for more flavor . What kinda build should I do ? How many wraps? Please give me a full Break down on the way to get best flavor possible . Juice with more vg I am so new and lost thanx in advance
I have been out of the game for a while and have just been using old mods/RTA's.
I am looking for suggestions on some of the best up to date mods as well as some of the best RTA that go with the mods.
Here is a little info...I usually vape at around 30-35 watts...
For the mod, I am looking for one that takes a single 1865 battery, is small in size, and is lightweight.
For the RTA, I am looking for a single coil DL tank....one that can hold at least 5ml of juice, can go with the mod suggested, and provides great flavor.
Can you guys please give me some suggestions? Thanks a lot
Hey guys, I currently use a lot of different hardware. Some of my favourites are the Aspire Atlantis Mega paired with the CF MAXX battery, and the Kanger Subtank Mini paired with the eleaf-istick 4400mah 50w.
Was wondering, if I wanted to go a step above, what should I try next, for a new setup? I really enjoy using sub ohm atomizer tanks but I usually use around 1.0 ohm coils, that's just what I prefer. Battery life is extremely important to me. I'd prefer something that is 3000mah or higher. I also don't really like Innokin.
Let me know!
Just wondering if anyone else has ever tried this, I have a subtank mini and the mvp3 and the original coil gunked out on me and i havent had time to go to the local B&M and just put the 1.4 ohm one in, and the flavor is amazing. its a nice colder vape thats extremely sweet with my funky monkey e juice.
Hey guys I'm looking to upgrade from what I have right now which is the atlantis v1. I'm not a huge fan of the atlantis because of the inconsistency with the coils and the loss of flavor after 2 tank full. The atlantis v2 seems nicer with the occ coils and improved airflow, but I'm not sure if its worth the upgrade since I could just get the new 5-pack occ coils for my v1. The subtank mini still has better options with the occ coils and RBA. Also it seems the occ coils for the subtank is easier to rewick which could save me a few dollars.
I'm not sure which one to go with. I'm leaning more toward the subtank, but still not sure. Maybe someone who has either one or knows more about them could help me. I like to have a good amount of clouds while still keeping the flavor.
Or if anyone has a sub-ohm tank they could recommend that they like more than the ones I mentioned that would be good too.
I use an ipv2
Thanks
I've really been trying to get on this gaping train. I smoke less than a pack a day and have bought the eleaf mini along with the gs16s tank specifically for the mini. I have bought several juices from Vape Wild ITCVAPES Mt Baker Vapor and from my local smoke shops. I recently upgraded to the istick 30w and have kept my eleaf gs16s tank and I'm using it on the 30w. My problem is every time I attempt to vape for the day I wind up weepy coughing up phlegm and heavy chest. I don't understand it. I've done 50/50 juice higher pg juice higher vg juice 100% vg juice...what am I doing wrong?? Anyone with advice please help as I sincerely would like to put down the cancer sticks.
I'm using a Subtank Nano on the KBOX. Should be absolutely no problems.
But my coils (both the 0.5 and 1.0) are tasting awful. I prime them great, I make sure everythings good and secure, and I'm using a 75%-ish VG juice.
But I can't go above 20 watts with two new packs of coils I have, and especially on the 1.0 coils, that's ridiculous. I'll get a vaporized rubber taste that tastes like the worst clearomizer coil I've ever come across.
Dry cotton should just have sort of a cottony, almost doggy or smokey taste. But this is a pure rubbery flavor. Are the gromets going to crap? These things should be built for Sub-Ohm Vaping!
I have no clue what's wrong but I can't use this thing anymore.
I'm also getting more juice in my mouth than I would if I drank it. These coils have started to spit and spew like nothing I've seen. I've used these coils for months and could always go up to 30 watts, no issues!
Hello knowledgeable guys and gals of ECF!!!
I like to switch flavors a lot, perhaps a little to often. I have read here that flavors can linger within the wicking material for quite some time. So long in fact that my habit of switching flavors doesn't provide enough time to work the old flavor out entirely. I have a bunch of extra coils for my nautilus mini and my Subtank mini. For accurate flavor I will switch out a coil for a flavor change. So I essentially have a coil for each flavor.
So here is my question!
How can I properly care for, or store these coils when they are not in use? Right now I have them sitting in a little dish of water so the juice doesn't dry up and gunk them up. Will this method harm them? Can I leave them in the water for a day or so, perhaps a few days even?
Thanks for taking the time to read this! I hope I'm not damaging my coils!
Hi, I'm not sure if I can post this here or not, I'm new, but does anyone have a picture of what the full-sized Subtank looks like on top of the Eleaf? I have the nano and might step up to the biggest one for the juice capacity but I want to make sure it doesn't look ridiculous. Thanks!
Sent from my iPhone using Tapatalk
Hey everyone! I recently bought an Eleaf Ijust 21700. I did my research on it to see of it was up my alley before I did. I love it! I know it is a regulated device, and has a max of 80 watts. But I'm curious as to how it works. Specifically, how it reads coil resistances and adjusts the power output accodingly. If anyone can enlighten me on this particular query I would greatly appreciate it. Thank you!