Subtank Mini Harsh On Throat After Standing A While

I have the Subtank mini on a Kanger 20 watts mod and everytime my vape has been standing a while (specially the morning) and I take a hit, it is extremely harsh and I cough. After a a decent amount of hits it smooths out.

Is this normal?  


Similar Content



From Cigs To Vaping... Help Please

I have been vaping for about a month, and am still dealing with bad throat irritation. I have a 50w istick with an Atlantis tank. Using 3mg juices, normally vaping at about 3.5-3.8v. Changed coil about a week ago.

I find vaping hit and miss. Sometimes I take a bunch of drags and it's smooth and tastes great, big clouds. Other times (especially in the morning) I take even a small hit and I'm coughing up a lung. I take even one hit in the morning and for a few hours my throat is dry, stuffy and irritated. I am pretty active, and I drink plenty of water. I don't think it's me, I think the tank is sometimes giving me smooth good tasting vape but other times it comes out incredibly harsh, and I can't explain why. Is it normal the first 10 hits or so in the morning are that harsh? it seems as though every morning I have a sore throat because of it. Even in general I just feel stuffier, and is since going from a pack of cigs a day to 1-2 cigs a day and vaping.

Any advice or ideas?  

Kanger Subtank Mini Issues.

Hi all,

I've been vaping for around 9 months, and I'm new to this forum (as you can see on the left haha.) Anyways, due to recent money issues, I've had to ditch my Atlantis 2 and go to a Subtank Mini. I enjoy it a lot, except for one issue...too many dry hits!! Especially when I'm using it at 30 watts on a box. Does anyone have any suggestions as to how this can be fixed or minimized?

Thanks in advance!  

12 Mg Nic Harsh Throat Hit Remedy

So I’ve been vaping 12MG nic for a while on my Kayfun and it’s the right amount of nic to satisfy my nic needs. Only thing is at 12 mg I do still get a few harsh throat hits and I’m not sure what the best way to tackle it is.

I’m already vaping Nic salt nicotine with hi VG, suppose I’m wondering is their any super smooth eliquds in the market that mint remedy this? I’ve noticed with some eloquids at 12mg is less harsh than other liquids at 12mg. I don’t make my own liquid tho so I have no clue on how flavours may effect throat hit.

I might also drop to 10MG and vape at a slightly higher wattage which I’m yet to experiment. Any advice would be fantastic!  

Taste Issues With Kanger Subtank Mini.....

I am new to the mod world and I entered the foray with an IStick 30 and a Kanger Subtank Mini. When I use an old cheapo tank that came off an earlier Ego my juice taste fine. It's a 2.7 ohm coil set at 7.5 watts at 4.5 volts.The problem is the taste with my Kanger hooked up. It is very harsh. I also do not get the same visible exhaust (sorry, but I can't think of another term ) I operate it at about the same watts. I have tried both a sub ohm coil and a 1.2 ohm coil. I have also tried different air intake settings. One thing to note: The cheapo tank gives me a much tighter draw (It's harder to draw in the air). I have adjusted the Kanger down to the smallest inlet and the resistance still seems very easy.

Would the difference in resistance of the coils affect the taste with running the same power. Do some juices just not taste good with different tanks? I must be doing something wrong. Maybe I assembled it wrong by leaving out something but for the life of me I can't see what? I did insert a little piece of cotton in one of the coils which was foreign to me.

Any ideas? Fire away and don't assume anything. Again, I am ignorant with these mods so I am learning here. Thanks a bunch  

Subtank @ 13 W .9 Ω - What's Your Setup?

I am running my Kanger Subtank mini rba deck on .9 ohm (spaced 4 wrap 28awg IIRC) at 13 watts and it is cloudy and flavorful. The OCCs were fine but I prefer the rba I think (even though I'm still a bit of a build novice). Many others seem to run it at 25+ watts and lower resistance. I had it at .5 Ω and ~19 watts was good, had dry hits above 23 watts. Now have dry hits above 15 watts at .9 Ω. I'm still playing around, but this current build/wattage is working awesome.

Other important factors:
Tobacco and vanilla DIY juice 4mg 50/50 PG/VG Organic cotton, standard wick Only had Subtank for 3 weeks Coming from BCC clearos Been vaping for 6 years Used to be mouth-to-lung, doing a lot of direct lung but still switching back sometimes What's your style with the Subtank? How are you running it? What's your wick-style? Dry hits? Wattage? Ω?  

Subtank And Nicotine

Wow-all I can say is you better drop your nic level down to about 3mg.
I have been vaping some 10 and 7mg with my Subtank Mini, holy moly, it's a burner!
I have gone from 12w to 20w with open airflow with a tobacco absolute,anything over 3-4mg is harsh to me.
Anybody else experience this?  

Subtank Mini And Coughing

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

Really Harsh Hits

Hi guys,
I am very new to vaping (have been smoking cigarettes for about a year now) so I don't know much about it. Just got my first vape (eleaf ijust 3)
So I primed the coil and filled the 2ml tank with juice and let it sit for 45 mins. So as I take my first hit it is sooo harsh to the throat. And I don't understand why. It doesn't taste burnt or anything. So I thought I may had a defect coil so I got the other one and primed it filled the tank and again waited for about 45 mins. As I take my first hit again directly welcomed with the harsh feeling in my throat even when I hit it from a small distance.
Can someone please help me?  

Why Am I Coughing So Much Now? I'm Not New To This...

Recently, I developed a pretty nasty cough, and I suspect vaping, since it usually happens right after I exhale, and at night when I'm in bed, it's a LOT worse. The problem seemed to start shortly after I got my Kanger SubTank Mini, which was about 4 months ago or so. I've been using 50/50 liquid for the past year or two and haven't changed the flavor in a couple years. I've also been using the same brand for about 4 years. The cough is brutal, and sometimes it hurts and makes me feel like I have to throw up. It's a lot like that tickle in your throat you get when you have a cold.

Things I've tried to remedy this:
- Gone all the way down to 20% PG, suspecting this may be a culprit.
- Tried many different coil lengths. I've built everything from 0.3 - 1.5 ohm.
- Tried using the OCC heads that are built for the subtank mini
- Changing airflow on the tank
- Building "looser" coils
- Building coils with different diameters

None of these have fixed the cough. The last step I guess I could try is a new tank or something, but I don't really want to do that.

Also worth noting, sometimes it's completely fine. No coughs.

Any ideas?  

Question About Builds

So I decided to try a 1,6 ohm coil on kayfun v4 clone Tobecco and I am using 28gauge Kanthal with a cotton
wick on a Rdna 30 and its vaping well at 15 watts I have a kanger subtank mini coming in the mail and here goes my question
So the kanger subtank states that with a .5 ohm coil i could vape up to 30 watts but the voltage comes in at like 3.8 volts
I was under the impression that the rdna 30 needs at least 4 volts to work which kinda brings me to my second question
What is the point of of sub ohms? cant i just build a 2.0 ohm coil or something like that to achieve the results as if i was subohming
I am very confused on this
thanks for the replys in advance
Oh yea is a 1.6 ohm coil at 15 watts a normal build or any recommendations for the kayfun v4 for watts and ohms thanks again