So I was thinking on getting the mephisto RDA with a sigelei 150 watt and i was wondering how well this would cloud chase especially with some .22 gauge on it. thanks
Anyone have this? please tell me some pros and cons if your do! Im planning on putting it on a sigelei 150 watt thanks!!
Hello, so i am thinking on purchasing a sigelei 100 watt dual 18650 and throwing a Hobo v2.1 RDA on top (All authentic of course). I was planning on using .22 gauge wire I am still a tad bit new to vaping but just want to hear yalls opinion! shanks
Hello so as of now I have a 100 foot roll of .26 gauge kanthol that ive been using litterally ever since i started getting into rebuildables. I have been looking for some thicker wire, and i was thinking .22 gauge but idk just wanted to hear what gauge you guys vape with!
Hey all. Been awhile since I’ve posted but I still snoop daily. Happy to say that this month makes a year off the cigs!!
I’m hoping for some advice on a setup I’m considering upgrading to.
For awhile now, I’ve been rotating a nautilus mini between my provari mini 2.5 and an istick 20w. I find I still get a more consistent flavor and vape on the PV but the istick comes in handy when I’m out and about. Ultimately, I’m looking to enhance my vape experience and hope to get more flavor and more vape production. I typically vape 70VG/30PG 6mg nic juices
I’ve been thinking of moving on up to a kanger subtank mini (found on sale for $30) so I can begin to learn how to build coils, etc. in hopes of saving some extra $$$ on replacement coils down the road. I’m also considering upgrading to a Sigelei 50 Watt VR2 (found them on sale for $50) so I’ll have plenty power for the tank. However, I have no experience with the Sigelei’s, just see that they are a fairly popular box mod with the community and online reviews. Also found the Sigelei 150w on sale for $80 but feel it may be too much for my needs.
So here’s my questions to you fine folks:
- In your opinion, do you think this setup (subtank mini w/ Sigelei 50w VR2) would be a nice upgrade for me based on the price? I’d really like a good setup that I can use to begin learning how to build but also want a mod that is powerful enough so that I won’t feel like upgrading a few months down the road. I also like the fact that I can still use/buy premade coils.
- To build a good sub ohm coil, what supplies are necessary such as what gauge/brand wire, cotton types/brands, tools needed, etc. Keep in mind that I’ve watched a few videos on building coils for this tank but am a complete novice and would need to purchase all the supplies/tools.
- Also, what are the best/safest 18650 batteries to power the sigelei?
I realize that I could probably search for this information individually through this forum and various review videos but am hoping for some additional input/opinions as well. Plus, there's so much information available online it becomes overwhelming and confusing to a noob such as myself.
Thank you in advance.
I have no quarrel with those that cloud chase or those that do not. I do think cloud chasing should be avoided in a crowed area as I dislike someone blowing a huge cloud in my face same way I disliked someone blowing smoke in my face. Moving on, after no significant cloud chasing and no new gear for almost a year I decided it was time for a toy. Grabbed a IPv4 and a little boy rda. Once I adjusted my coil build technique to accommodate so much extra power gotta say I'm really enjoying it. So the point of my rambling, besides the fact I can, is I have always hated 0nic liquid. Seemed so depressing and missing my TH which is important. But with the right build a 0nic liquid has just enough TH to make me think it's possible to go to 0. Not saying I want to go to zero but it was never an options before due to it being unsatisfying. So to anyone who does want to give up nicotine you may want to consider a setup that chucks out more vapor.
Hey all finally made the move to rda I am loving the flavor and hits I get. I got a tub boat clone and a mutation x v4 love them both . It was suggested by the vape shop to upgrade to a stronger box. I have a eleaf 50w . I would like to upgrade but not sure witch way to go . Is there anything new comeing out I should wait for or just get a ipv4 or ipv3 because it is 150 watt or go for the sigelei or any other suggestions thanx in advance
Hi I just got a sigelei 100 watt plus and this is my first time using freshly charged batteries in it... it's still reading at being 100% in the sigelei. ive been using it for maybe 3 hours total . Is this normal .. because its starting to make me wonder if something is wrong. Its been at 40 to 50 watts this whole time. I didnt charge the batteries at first when i got them because my charger did not arrive yet...then once it did come i charged them and now its continuing to stay at 100%
All of the sudden I wake up today and notice my 510 threading on my sigelei 50w box mod is jacked up. I cleaned the threads on my subtank mini and on my sigelei mod. I then tried screwing it onto my mod and now no matter what I try , there's a gap between the top of the mod and the bottom of the subtank (it's not screwing down all the way and has about a 3mm gap, hence now it won't fire...
I screwed my subtank onto my ileaf 30w and screws in flawlessly, so it's the sigelei threads ...
but I did pay a lot for my sigelei and prefer its hits , I dunno, I usually Vape about 16W on my sigelei And not sure how that translates over to what wattage I should run the eleaf at ?
Also, I just noticed that my spare RDAs will still screw onto my sigelei well..I'm so confused what's up !!!!
I got an authentic yep RDA off rbavaporstore.com. The screws that go into the posts are so long that, with 24 gauge in the post, the screw won't start to screw into place. I got 28ga to fit and I can screw them down but 24 gauge doesn't work. Is there anything I can do to change this?
I was thinking I could sand the screws down or maybe drill the post holes bigger so that the kanthol has more room to be tightened down with the screws
Thanks for any help
So i was thinking of starting a thread which might list every mod past and present which would be compiled by you from one day to the next. At first i thought it wouldn't be practical because no one would know if a mod had been added unless they read through the entire thread.
Then i thought if a list from A though Z were compiled systematically by members by copying and pasting the most recent list in this thread, and then contributing to it, ensuring your entries are inserted alphabetically (Even if it's only one or two mods), then eventually this thread could contain pretty much every mod that exists, and would be updated regularly, by you !. No pictures please !. Only brief descriptions such as "company name / name of mod / type of mod".
What better place for such a list than ECF, "The world's largest e-cigarette website.
Here's my contribution to start it off :
____________________________________________
Pioneer4you IPV 3 150 watt box mod (2 18650 batteries)
Pioneer4you IPV 4 100 watt box mod (2 18650 batteries)
Provape Provari V2.5 "Polished stainless steel" tube mod (1 18650 battery)
SIGELEI 100 watt Plus box mod (2 18650 batteries)
Smoant Charon TS 218 box mod (2 18650 batteries)
Tesla advanced vapourizer 6 volt -15 watt VV/VW Tube mod (single 18650 battery).
Vamo V7 40 watt tube mod (Single 18650 battery)
Voopoo Too 180 watt tc box mod (2 18650 batteries)
________________________________________
it's a list of all the mods i own at this present time.
If you're going to add to the list then you can add any mods you can think off as long as you place those mods into the existing alphabetical order ( description should start with the company name). Batteries such as, say, vision twist aren't mods so lets not get into those. Tube mods and box mods (Includes internal/built in battery mods) only please (Squonkers included)
And lets not forget Mechanicals.
If you think a previous desciption is incorrect then correct it.
Ensuring company names come first in your description will enable a logical, consistant "alphabetical" understanding of the list by anyone who views it.
If you don't know the name of the company who made the mod just insert the name of the mod etc.