Ipv Mini V2 Help

OK so I have a Vaporesso Veco Solo Kit and my tank is stuck. I've tried rubber gloves, rubber and pliers, lock pliers and anything else you can think of. The tank won't budge. I need to change my coil but how can I get this damn tank off.

Not the best picture but you can see the tank.

UPDATE: After continuous trying with multiple methods, my glass has decided to give up and is now in 4 pieces so I need either a new glass or new vape entirely.  

Can I use an external battery pack to charge an IPV Mini?

I have a 10,000mAh external battery to charge my cell phone (Note 4, with a 3500mAh battery), which has 2 options for charging: 1.5v=1A and 2.5v=2.1A.

Is it recommended? Is it safe? Are there any precautions I need to take if I use the battery pack?

I haven't gotten around to getting an extra 18650 battery (and charger) for the IPV Mini. I've finally realized that it takes maybe 2-3 hours to charge the battery via the USB cable. But the one battery doesn't quite last me all day, depending on how heavy I'm using the Mini.

I usually carry a Volcano Inferno once the Mini dies, but the Volcano really sucks in comparison to the Mini. I'd love to be able to charge the Mini while I'm out and about.

I've added a pic of the external battery for specific information.


Thanks for all your help.  

Hi everyone I have been vaping for about a month now and loving it so much, I haven't smoked any normal cigs since I started, everything was going good until about a week ago when I noticed some yucky mucus/phlegm in the back of my throat now it's built up so much that it's causing me to constantly try to bring it up but it just won't budge no matter what I do. Dr told me it is from quitting cigs and my body is getting rid of it however someone told me it can also be the PG, I use 50-50 and 12mg Nic I really don't know what to do because I need the PG for throat hit as I was a heavy smoker but if I don't have PG then I won't get the hit...I'm at a loss... Has anyone had this mucus problem and if so how did you get rid of it? Feeling really down atm  

So I got a subtank mini after hearing a lot of good things the stock coils are amazing but I can't seem to get the rba to work properly I've tried everything I can think of and it just doesn't wick properly I always have to auto drip covering the air hole and puffing on it a little and even then it doesn't taste right can someone help. I hope I have this in the right forum


Sent from my iPhone using Tapatalk  

Hey everyone, Sorry it's been a while.

I recently purchased an ipv mini 2 a month or 2 ago and just today I started having problems with it. I was running it on 40 watts and all of the sudden it adjusted itself all the way down to 5 watts. I tried to bring it back up to 40 and it froze up and said please unlock... but it was already unlocked. I took the battery out and I'm gonna give it a rest for a while. This is very strange to me but I was wondering if anyone else had a problem similar to this or not. Any help would be greatly appreciated! Thanks!

p.s. not sure if this is in the right forum. Sorry if it is not.  

my subtank mini is stuck on the atomizer base of my invader mini.... like... REALLY stuck.. what can i do?  

Hi. It's been a while since I've been here. I haven't had a need for anything, vape wise, in quite a while. But now I need to replace my aw 18490 batteries, and I just saw a thread saying the aw factory was destroyed. So apparently I need a new suggestion.

I need something safe as I'm using Reo mini. Can someone suggest a brand please?  

Hi,

Threads are going to stick, it's a fact of life. Here's a fix that works.

You'll need 1) thin rubberized gloves 2) two pairs of pliers (with curved jaws, not straight) and 3) 220 grit sandpaper for metal

The steps are;
1) buy a pair of small-sized mechanic or garden gloves. The ones with rubber over fabric
2) cut off one inch of the finger tips (off the gloves, not your fingers)
3) slide the tips over the jaws of your pliers
4) put the pliers on either side and twist; righty-tighty, lefty-loosey (unless you have backward threads, usually not)

A couple things I found that improve it even more;
1) used sandpaper to smooth the sharp ridges on the pliers; wrap the sandpaper around a pencil till it fits the curvature of the ridges, I put the pencil in a drill and made quick work of it. They won't cut through the gloves so easily.
2) gently sand the tops of the threads on your tank, rough areas here sometimes cause the sticking. Don't sand much, just till they feel smooth.

it works, I Gar-on-tee it.


 

in your guys' opinions, what's the best (rebuildable or not) MINI tanks? in my opinion, subtank nano takes the cake, my friend has one but I don't really feel like investing in one yet. i really don't like the aspire nautilus mini, shouldn't be considered a "mini", it's still huge!  

I'm about to buy one nd stuck on which one to get need help deciding thanks