Advice On How Well This Would Work?

Hello so as of now I have a 100 foot roll of .26 gauge kanthol that ive been using litterally ever since i started getting into rebuildables. I have been looking for some thicker wire, and i was thinking .22 gauge but idk just wanted to hear what gauge you guys vape with!  

Hey all. Been awhile since I’ve posted but I still snoop daily. Happy to say that this month makes a year off the cigs!!

I’m hoping for some advice on a setup I’m considering upgrading to.

For awhile now, I’ve been rotating a nautilus mini between my provari mini 2.5 and an istick 20w. I find I still get a more consistent flavor and vape on the PV but the istick comes in handy when I’m out and about. Ultimately, I’m looking to enhance my vape experience and hope to get more flavor and more vape production. I typically vape 70VG/30PG 6mg nic juices

I’ve been thinking of moving on up to a kanger subtank mini (found on sale for $30) so I can begin to learn how to build coils, etc. in hopes of saving some extra $$$ on replacement coils down the road. I’m also considering upgrading to a Sigelei 50 Watt VR2 (found them on sale for $50) so I’ll have plenty power for the tank. However, I have no experience with the Sigelei’s, just see that they are a fairly popular box mod with the community and online reviews. Also found the Sigelei 150w on sale for $80 but feel it may be too much for my needs.

So here’s my questions to you fine folks:

- In your opinion, do you think this setup (subtank mini w/ Sigelei 50w VR2) would be a nice upgrade for me based on the price? I’d really like a good setup that I can use to begin learning how to build but also want a mod that is powerful enough so that I won’t feel like upgrading a few months down the road. I also like the fact that I can still use/buy premade coils.

- To build a good sub ohm coil, what supplies are necessary such as what gauge/brand wire, cotton types/brands, tools needed, etc. Keep in mind that I’ve watched a few videos on building coils for this tank but am a complete novice and would need to purchase all the supplies/tools.

- Also, what are the best/safest 18650 batteries to power the sigelei?

I realize that I could probably search for this information individually through this forum and various review videos but am hoping for some additional input/opinions as well. Plus, there's so much information available online it becomes overwhelming and confusing to a noob such as myself.

Thank you in advance.  

So I was thinking on getting the mephisto RDA with a sigelei 150 watt and i was wondering how well this would cloud chase especially with some .22 gauge on it. thanks  

I've been using only twin-18650 mods for some time, and before the shipping ban came into effect, I bought a backup of my most-used mod (a Geekvape Aegis X), but since the 100W single 21700 / 18650 Voopoo Drag X Plus was only $35, I also picked up one of them as another backup.

I vape exclusively on RDA's, typically with a 3mm dual coil twisted build with 24 or 26 gauge Kanthal or nichrome-80. 5 or 6 wraps with 24 gauge, 6-8 wraps with 26 gauge. I typically vape these between 90 and 110 watts.

I did not expect to get a 'true' 90-100 watts out of the Drag X, so I set a target of around 60 watts. I mounted a 3mm dual coil twisted 28 gauge build with 6 wraps, which on my Aegis X vapes great at 60 watts, and very good at 50 watts. It measures at 0.45 ohms.

But on the Drag at 60 watts, it only vapes at what feels like 30 watts on my Aegis. Setting it higher makes no difference either, it seems to 'top out' at ~30 watts regardless of the setting. 60 watts @ 0.45 ohms is only around 11 amps, so I doubt I'm hitting an amperage limit.

I am using 18650 batteries (VTC5A), and it is about time to replace them, as I am only getting around 70% the battery life as I did when new. I will be picking up some 21700 batteries at the same time, which hopefully help with things on the Voopoo.

Does anybody have any good experiences with ~60 watt builds on a Drag X Plus?  

I got an authentic yep RDA off rbavaporstore.com. The screws that go into the posts are so long that, with 24 gauge in the post, the screw won't start to screw into place. I got 28ga to fit and I can screw them down but 24 gauge doesn't work. Is there anything I can do to change this?

I was thinking I could sand the screws down or maybe drill the post holes bigger so that the kanthol has more room to be tightened down with the screws

Thanks for any help  

So i was thinking of starting a thread which might list every mod past and present which would be compiled by you from one day to the next. At first i thought it wouldn't be practical because no one would know if a mod had been added unless they read through the entire thread.

Then i thought if a list from A though Z were compiled systematically by members by copying and pasting the most recent list in this thread, and then contributing to it, ensuring your entries are inserted alphabetically (Even if it's only one or two mods), then eventually this thread could contain pretty much every mod that exists, and would be updated regularly, by you !. No pictures please !. Only brief descriptions such as "company name / name of mod / type of mod".

What better place for such a list than ECF, "The world's largest e-cigarette website.

Here's my contribution to start it off :


____________________________________________

Pioneer4you IPV 3 150 watt box mod (2 18650 batteries)

Pioneer4you IPV 4 100 watt box mod (2 18650 batteries)

Provape Provari V2.5 "Polished stainless steel" tube mod (1 18650 battery)

SIGELEI 100 watt Plus box mod (2 18650 batteries)

Smoant Charon TS 218 box mod (2 18650 batteries)

Tesla advanced vapourizer 6 volt -15 watt VV/VW Tube mod (single 18650 battery).

Vamo V7 40 watt tube mod (Single 18650 battery)

Voopoo Too 180 watt tc box mod (2 18650 batteries)

________________________________________


it's a list of all the mods i own at this present time.

If you're going to add to the list then you can add any mods you can think off as long as you place those mods into the existing alphabetical order ( description should start with the company name). Batteries such as, say, vision twist aren't mods so lets not get into those. Tube mods and box mods (Includes internal/built in battery mods) only please (Squonkers included)

And lets not forget Mechanicals.

If you think a previous desciption is incorrect then correct it.

Ensuring company names come first in your description will enable a logical, consistant "alphabetical" understanding of the list by anyone who views it.

If you don't know the name of the company who made the mod just insert the name of the mod etc.  

Hey guys. I have been in the vaping scene for a little while now. Just curious to what everyone likes to sub-ohm with.

My favorites so far.

Mutation X V3- 24 gauge dual parallel 5/6 wrap
Mutation X V4- 20 gauge dual 5/6 wrap or dual 6/7 wrap
Turbo RDA- both of the above builds work well

I've had the dark horse, doge and doge v2, freakshow, and a few other RDA's and the 3 above have been my favorite....v3 was my favorite for a while until I tried the v4, its now my favorite, and its a tie between the v3 and turbo for 2nd and 3rd place.  

Hey everyone,
I've been vaping for about two years now, and have decided to start dripping. For the last few weeks, I have been dripping on an IGO-W, 26G Kanthal single coil (7 wrap micro coil reading at 0.8ohms) on my iStick 30w.

I just recently purchased a new battery that should arrive today, and was wondering if anyone had advice/tips on producing some fat clouds! Dual Coils? Different coil builds? Number of wraps? Watts to vape at? I think you get the picture lol.

The items I will be using are as follows:
-SMOK XPRO M80 Plus
-IGO-W
-26 Gauge Kanthal Wire
-Japanese Organic Cotton
- 80vg/20pg Juices

All input is greatly appreciated. Thanks!
-Tyler  

Does anyone know what gauge wire the Lemo2 comes w/? It doesnt say but its real heavy. I like it. Coils keep their shape better when wicking thick.  

Anyone have this? please tell me some pros and cons if your do! Im planning on putting it on a sigelei 150 watt thanks!!