Testing Out My New Aspire Nautilus

I'm just breaking in my Nautilus on my Aspire battery, as of yet I expected a bit more vapor production from this set-up at least 2x more than my Triton.When puffing on it frequently, it runs a bit hot even with the 1.8ohm coil.Eiether the Nautilus or the battery likes the 1.8ohm coils better than the 1.6ohms why is that?I also experienced leakage and gurgling. Once I put a new coil in, that went away. I'm just thinking how can I get a bit more vapor production.It's better than my Triton but not by much.Is it the battery?  


Similar Content



Having A Hard Time Finding The Right Set-up

I'm having a mad time trying to find a tank or clearo to fit a relatively small battery to upgrade from my triton without having to go to a MOD set-up I need a nice drip-tip too.It seems like an in between of my Triton tank and a MOD I can't quite find the vapor production I'm looking for I lowered my ohms on the triton 1.8 it did produce a bit more vapor but the tanks just aren't built for those ohms and they run to hot.I've already gone through three coils.I looked at the Aspire Nautilus mini premium kit not completely sold on it, eGo One battery with Nautilus mini but I think the tank I'm looking for should hold more e-liquid.Any help here much appreciated.  

Looking To Upgrade My Vaporizer

I'm using the Halo Triton and am not satisfied with the vapor production.Is there anything inbetween a Triton tank and a MOD middle of the road kit out there? How bout an Aspire Nautilus mega starter kit?  

Need Help For Choosing New Hardware.

I've been vaping for less than a year, but I've has inconsistent results with my gear.

I currently have a CF VV battery with a Nautilus mini along with a triton VV with regular Halo tank.

I used to have a great Vape experience with the Triton but now I get that rubbery taste every so often. Support told me it was because I didn't let the wicks soak, so I tried again with another coil and had the same result after a few hours.

CF + VV is fine I guess, but I'm not getting the same flavor with the Halo juices.

I was thinking about switching to dripping but I know nothing about the subject. Do you still need to replace coils when you drip?  

Vapor Production Ohms And Voltage

How can I get more vapor production out of my Halo Triton?I lowered my ohms to 1.8 to 2.0 and bought a variable voltage battery...going up on voltage didn't help. What next?  

Gurgling Nautilus

I have my Aspire Nautilus on my iTaste MVP 2.0 at 11 watts, running a 1.6ohm coil. I have also used it on my Nemesis mech mod with either an LG HE2 or a Sony VTC5 (I already know that mech's aren't ideal for tanks, but it was working really great). Everything has been fine, but now I'm noticing a bit of gurgling. Am I just under-powering the coil?  

Aspire Nautilus Tank Works On Mvp 20w?

Hi all. I've been thinking of trying the Aspire Nautilus tank on my MVP 20w since I've read so many good things about it here. I'm doing mouth to lung vaping and I have an iStick 30 on the way too.

I just want to confirm the Nautilus tank will work on both mods? And what replaceable coils should I get for the Nautilus? Thanks!  

The Ego One. Amazing, Yet Awful

So I purchased the eGo One after hearing amazing reviews of the device. I use an Aspire Atlantis on an MVP 3 but needed something more portable for work/going out. I was more than impressed with the eGo One using the .5 ohm coil, and equally so with the 1 ohm coil. The battery life is great, the flavour is perfect and the vapor production is unexpected. However, within 2 hours of using the .5ohm coil, the vapor began to taste burnt, more than on any other wick I have burnt. So until I could get hold of another I used the 1 ohm coil. 24 hours that one lasted. Joyetech said they would send me replacements free of charge, but while waiting for this I went to my local shop and bought another .5 coil. 1 HOUR LATER, it's frazzled. Wether I'm just being unlucky or the device is faulty I don't know, but I am incredibly disappointed. It's not through a lack of priming or using the wrong liquid, I'm an experienced vaper and had fully primed the wicks for 20minutes minimum and was using a 50/50 juice. This device had great potential, but it will be going in the bin for now (except the battery, which even does a great job on my Atlantis)  

Can You Use A Bdc Coil In A Aspire Nautilus Mini?

My GF is a chronic smoker (over a pack a day) and Ive been doing a heap of research into vapors in an effort to help her quit, I just bought an Aspire Nautilus Mini for her but upon further research i notice some users were worried about the ceramic fiber in BVC Nautilus Coils.

I know Aspire claims the ceramic filter is ok but there is lots and lots of research to show ceramic fibers cause cancer, so whilst my GF has bigger problems with her excessive smoking i dont want to give her something to compound the chances of cancer.

Question: Can i fit and use a BDC in a Nautilus Mini? the filters are different but i know they are interchangeable, i just dont know if it will work? anyone tried?

The BVC contains the ceramic coil and the BDC doesnt?

Thanks for anyone with a reply, i appreciate your time.  

Some Advice Please :)

Hey there!
I have been vaping for a little over a year now and have gone through several different set ups but am fairly happy with what I'm using atm-- I have one of those Aspire Sub Ohm batteries and have been using a Nautilus tank with it. It seems that the coils in the tank burn out super quickly because the battery is too strong for it I guess? Any way the other day my battery and tank (the whole shebang) fell right into the toilet. The only good thing was that the toilet was recently flushed so yeah... I am now in need of a new battery and was interested in one of those lil box mods that everyone in the world seems to be using lol. The tanks I have and would be using with it are my two Nautilus tanks (one is a mini) and sometimes an Innokin iClear thingy (the one with the cool rotating tip). I vape mostly very sweet caramel, cookie and cereal juices at .6 nic and am mostly in love with flavor versus cloud making if that makes any sense. I'm not at all good with any of the technical stuff so have no desire to use any rebuild-able stuffs. Oh and I have an Aspire vv battery but it loses the charge so quickly I am kinda wanting something new...

Any one have any great advice on a new battery for me?  

Istick 50w Resistance Reading .2ohms High

I have had my istick 50w for about 24 hours now. I the issue I am having is that all my 1.8ohm tanks are reading 2.0ohms on the display of the iStick. This is the case for my Aspire ET-S and Nautilus Minis. On two occasions the Nautilus tanks have read 1.9. Never 1.8. Even with brand new coils. I get the same result on 4 Nautilus Minis and 3 ET-S tanks. I get the same results with the mod turned off when I screw on the tanks as I do with the mod turned on. Any ideas or suggestions?