Fake Aspire Nautilus Bvc Coils

Hi all. I've been thinking of trying the Aspire Nautilus tank on my MVP 20w since I've read so many good things about it here. I'm doing mouth to lung vaping and I have an iStick 30 on the way too.

I just want to confirm the Nautilus tank will work on both mods? And what replaceable coils should I get for the Nautilus? Thanks!  

I have a full sized Nautilus, and a mini, but I don't use them because of the concern surrounding the material in the coils. I understand that at some point, Aspire is going to be putting out all-cotton versions of the BVCs. But until that happens, I'm staying away.

I happened upon the Smok Acro 5.0 on Madvapes website, and it said its coils are compatible with the Nautilus. But I can't find any information about them. Does anyone know if the Acro coils are BVC? And what materials are used?

Acro 5.0 Replacement Atomizer Coils  

Curious if any of you have gone to the Kanger Aerotank from the Nautilus Aspire tank? I have two Nautilus tanks and I have to say it is real hit and miss when I change the coils out. Sometimes I will have a clean hit and no burnt taste and other times it is burnt tasting for the life of the coil. A local vape shop told me to switch to the Kanger Aerotank. They did not have it in stock so I ordered it to try. Yes I am doing the whole prep scenario with the drops and hitting it 4 to 5 times before hitting the button. He told me it is common with the Nautilus, but not with the Kanger Aerotank. Any feedback?  

My GF is a chronic smoker (over a pack a day) and Ive been doing a heap of research into vapors in an effort to help her quit, I just bought an Aspire Nautilus Mini for her but upon further research i notice some users were worried about the ceramic fiber in BVC Nautilus Coils.

I know Aspire claims the ceramic filter is ok but there is lots and lots of research to show ceramic fibers cause cancer, so whilst my GF has bigger problems with her excessive smoking i dont want to give her something to compound the chances of cancer.

Question: Can i fit and use a BDC in a Nautilus Mini? the filters are different but i know they are interchangeable, i just dont know if it will work? anyone tried?

The BVC contains the ceramic coil and the BDC doesnt?

Thanks for anyone with a reply, i appreciate your time.  

*I posted this in the Aspire Forums, but wanted to get some Feedback from my fellow ECF members*

Hi,
I bought a Aspire Nautilus Mini Premium Starter kit that came with the 1000mah VV+ battery a few months ago. It came with a 5 pack of 1.8 Ohm BVC coils. I have since bought 3, 5 packs of coils from 101Vape. They have all worked great, but 101Vape has ran out of stock.

I bought 2, 5 packs of 1.8 Ohm BVC coils from WORLDofVAPE. They came in the mail today and they also work (better) great, but they are not physically the same. They have the same markings and threading and post, but the wicking holes are 3 times larger. They are not in the middle, but run along the top of the threading. They say Aspire BVC 1.8 (3.3-6.0) CE and have the trash can picture on them. The packaging is exactly as the first 3 sets of 5 packs I have bought (including the pack that came with the kit). I have checked every security code and they all come back genuine.





Why do the BVC coils from World of Vape have larger intake holes on them? Are these a newer improved design? Did you start using different equipment or specifications to produce the BVC? Are these a different coil meant for a different tank? I would really like to know so that I can order the exact ones again in the future as I don't know when World of Vape will run out of stock. Any feedback would be great!  

Hey everyone. I've using Aspire non Nautilus Non Atlantis BVC coils. 1.6 ohm. Volt rating shown on coil is 3.0-4.2v. Aspire says anything under 15w is good. Well did calculating and up to 4.8v would fit that wattage.
Help?  

I'm just breaking in my Nautilus on my Aspire battery, as of yet I expected a bit more vapor production from this set-up at least 2x more than my Triton.When puffing on it frequently, it runs a bit hot even with the 1.8ohm coil.Eiether the Nautilus or the battery likes the 1.8ohm coils better than the 1.6ohms why is that?I also experienced leakage and gurgling. Once I put a new coil in, that went away. I'm just thinking how can I get a bit more vapor production.It's better than my Triton but not by much.Is it the battery?  

So I've had a few various egos here and there, and I've loved them. My favorite has been the Aspire CF mod I currently have with the nautilus mini. I feel like it's about time to step my game up. Kinda.

I want to get into sub ohming. It looks fun and the vapor is impressive. I'm not normally one to vape in public, but at my desk at home it'll add some more fun to vaping I think.

I just don't know where to start. I don't really want to build coils or anything like that. I'd rather go with a tank that can sub ohm. Down the line I'll start building my coils, but now I don't want too. I want to see if it's really for me first.

So my question of the topic. What are some good kits that are basically starter kits for this? I've been looking at the ego one, and the aspire cf variant. The aspire is a tad too big, so I don't really want that. And to be honest I want more of a box mod.

I'm looking to spend around 70 for everything. Anyone want to suggest me a good box mod and tank kit that'll help me sub ohm? Thanks for any help!  

I was strolling through sweet vapes website and seen they had these Atlantis coils made by aspire.I plan on ordering a temp control mod this week and wanted some nickel coils to go with it I have the maganus/starre tank...well I seen that the vapor shark nickel coils are twice the price so I was wondering if any one had any experience with these. I heard the Atlantis coils would fit in the Maganus but didn't know if these would and I see the vapor sharks ni200 coils are 0.15 and the vapeonly coils are 0.25 would that be noticeable or have any effect such as having to use more watts or temperature? Here's a link VapeOnly vAir-T Atlantis Nickel OCC - Aspire Coils - Aspire - Clearomizers Tanks  

I have had my istick 50w for about 24 hours now. I the issue I am having is that all my 1.8ohm tanks are reading 2.0ohms on the display of the iStick. This is the case for my Aspire ET-S and Nautilus Minis. On two occasions the Nautilus tanks have read 1.9. Never 1.8. Even with brand new coils. I get the same result on 4 Nautilus Minis and 3 ET-S tanks. I get the same results with the mod turned off when I screw on the tanks as I do with the mod turned on. Any ideas or suggestions?