Best Box Mod And Cartomizer Combination

Hi

I recently purchased the eleaf istick which I use with the kangertech subtank.

While I am impressed with the vapour production, I find it way too harsh and hot. On the coil it has the recommonded setting printed between 15 - 30w. I'm at 15w, but I'm still finding it too hot and harsh.

My question is:

is it safe to go down all the way to 11w or even possibly 8. I am confused as I've heard this could short my device or cause injury e.g device exploding, fire...

Thanks  

I found an "interim job" this week and decided to reward myself. I was originally stopping by the B&M to get another Subtank Mini as this job involves a 45 minute commute and I'd like another 'bigger' tank to take with me (almost got a regular sized Subtank, but it looked ridiculous on the VF and didn't feel comfortable), but they hadn't gotten them in yet, so as I was standing there browsing (as I always do if they don't have what I'm looking for), they said they got more RDA's in. So I looked, but wasn't thrilled with the one that was suggested first, so someone else suggested my new toy. It looks great on the VF! I already know how to build, but I asked about different flavor builds, so they sat down and showed me how to do twisted builds. They built me a twisted 28g single coil that reads ~0.6 Ohm. Holy cow the flavor! I know, I'm like a little kid discovering the swing set all over again for the first time. lol. So...what do you think of my new toy?

 

Sorry for not doing the research, but tomorrow I am leaving for a trip and appreciate any quick advice.

Yesterday, after purchasing a much-needed new tank, I finally realized that I had to semi-retire my Provari's. Evidently all is about wattage these days and not voltage.

At a local B&M, I grabbed a new iStick 30W and a Kangertech Subtank Nano, found a few Ohm's Law calculator sites, but I am still skeptical about the different setting recommendations I am getting.

Obviously, I do not want the iStick to blow up, but I am not getting the same vaping pleasure I did with the old-style provari and older tanks. Same eliquid, but zero throat hit and little vapor.

Can somebody please just provide me with the settings I need to use for this week?

I PROMISE to come back and contribute more again to this great community.

_______
Tobacco-free since March 2012 -- ONLY because of electronic cigarettes and the great ECF forum
_______

Thanks much,
Sea  

Hi everybody, I have lost track of new vaping gear and need an advice.
Finally one of my mods died. The newest one, Joyetech eVic Primo. Bad from the beginning (because of its faulty protection) it just stopped working. Another mod should die soon. It is a clone of iStick 30, 4+ years old. It's my best mode, but its battery already is at about of half capacity (after about 1500 charges).
So, now I use iStick 30, iStick Pico 25 and iStick Pico. Tanks (from best to worst) Kayfun 5, Siren 2, Ammit, OBS Engine NANO.
I need a new mod and, possibly, a new tank.
Thanks for reading.  

Hi, I'm not sure if I can post this here or not, I'm new, but does anyone have a picture of what the full-sized Subtank looks like on top of the Eleaf? I have the nano and might step up to the biggest one for the juice capacity but I want to make sure it doesn't look ridiculous. Thanks!


Sent from my iPhone using Tapatalk  

Is the Kanger Subtank (mini, probably) a good way to get into rebuildables, or would you recommend I start with something else? If so, what? Please be as vague or as specific as you'd like. I'm not super particular about whether it's a dripper or a tank, as long as it's user-friendly and noob-approved.

Also, I'm going to be needing something to fire it, since I presume my little EVOD-twist won't have enough "umph" to get the job done. What I'd really like is to get a VaporShark rDNA-40, but the budget isn't going to allow for that for some time, yet. So, for the moment, I'm looking at the VS DNA-30, or the Eleaf iStick 30w which is like half the price. What would you say are the relative merits and flaws of each? Is there something about the VaporShark that makes it actually worth paying twice as much for, or should I keep the extra cash and just go with the Eleaf? Or, again, is there something else you'd recommend I look into before either one of those? Any input is appreciated, thanks!  

I am a casual vaper but still want to blow big clouds, what would you recommend? Eleaf istick 30w or 50w? Also which tank would you recommend for the 50w and 30?  

Hi all

So I'm currently set up with an iStick 50w and a SubTank (big un) all thanks to you guys im in Vape Heaven.

want i want to ask is this -

My Girlfriend is now getting more into Vaping and hasnt touched a Cigarette in quite some time. she has an iStick 20w and loves it (cos its pink -_- )

but she's not liking the tanks (aspire Viva Nova, one with a cross on it (completely forgot the name) and a protank 3 mini)

Shes tried my subtank AND LOVES IT! she's liking the airy draw and the ultimate flavour.

My question is she likes to vape at around 3.0-3.3V. Will the Istick 20w be able to SAFELY handle the protank nano with the 1.2ohm coil in?

I've told her she may have to up the power abit but other than that she should be fine right?  

I've searched the forums and really couldn't find anything spot on with the problem I'm having, but if there is something I missed please forgive me. Anyways Ive been vaping for about 2 months now. I've had no problems with coughing and not being able to Vape up to now. I was using an Aspire Nautilis mini, and I decided to get a Kangertech sub tank mini. This is where the problems have begun. I'm coughing like crazy with this thing. I've done mouth to lung hits, let the it sit in my mouth before inhaling and still cough like crazy and it's only with this subtank I'm now using. I was using the 0.5 ohm coil that was on the unit. I switched to the 1.5 to see if that helped and it didn't. I've adjusted air flow, played with wattages and voltages and really no help. Is there a reason this is happening? What would be the cause of me having a coughing fit only when using this subtank? By the way I'm using a 50/59 mix of e juice.  

I ordered a new version of the Vamo V7 varible voltage 40 Watt mod and I am wondering if the Kanger Subtank Nano with a 1.2 ohm coil would be a viable combination. I want to try this tank just for the better flavor possibility but since the Vamo V7 is only rated down to 0.8 Ohms, I figure that I would have to use the 1.2 Ohm coil that is supplied with the Nano. I'm not quite ready to start dripping at this point in my vaping experience but want to get close to it. Are there any other tanks that would work better with the Vamo V7 than the nano? Thanks in advance for the advice.