So I recently bought a smoktronic abs box mod v2 and whenever I screw on a tank or rda on it, it fires without me firing it. What could be the deal and how can I fix this?
I have had a lot of mis fires on my Smokless Owl 25.00 squonker and had to press down extra hard
and sometimes side ways to get it to fire.
I just done some contact cleaning and scraping on the Smokless Owl Button.
I took my wifes Emory board finger nail file thingy and depressed the firing button and held it depressed and rubbed it
across the firing pin and then took a small jewlers screwdriver and scratched it back and forth across the end of the pin and
did the same thing to botton ground pin.
I noticed some black color on the end of the firing pin before I started this cleaning process.
I gently took the screw driver and scratched back and forth across the positive and negative end of the battery just to
take any small film or oxidation from the ends just to make a better connection.
It seems to fire now just like it should with no MISFIRES---mod is now perfect !
Hi there...a month ago I bought myself smok rpm80...is it considered normal when the firing button is being pressed it kinda felt rubbery or mushy abit? The pod fires flawlessly though.
So I recently bought a brand new Vaporesso Gen mod. Normally I stay away from compression/press fit 510 connections but I decided to give the Gen a shot. I've only had it 1 day, and already I've noticed that the 510 connection is raised slightly above the top of the mod and with a tank connected it is slanted towards the back of the mod. From what I can tell the 510 isn't loose at all. But it still slightly worries me. And a couple times I've taken a hit and everything is fine. Then all of the sudden while my finger is still pressing down the fire button it stops firing. Has anyone else experienced this with the Gen?
Recently my 2 Tobecco Super Tank Mini tanks won't sit tight on my Vaporesso Gen Mod. It doesn't spin, when it's all the way tight but they both wobble a little while on the mod. It's kinda annoying & I try my best to keep my thumb against the tank just to make sure it won't move while firing but just wanna make sure I'm safe to continue vaping as I can't afford a new tank, definitely not a new Mod right now. On the other hand, I have a daughter to take care of. Just trying to figure out if it's fixable & tanks or mod? I hope I explained it well enough?!
As the title states, I have a question. A little information to preface; I'm using a snow wolf mfeng ux mod with a tfv16 tank, vaping at 115 watts. This is a dual 18650 mod, and been vaping fine for a while, using different tanks and wattage too. Lately when I vape, it feels like the firing bar on the side vibrates long a spring slips from a seat and does that old school door stopper wobble and it stops, but doesnt do it for other fires when I vape. My batteries are clean/healthy and undamaged wraps, 510 sections for mod and tank is clean, batteries only ever used in this mod.
I dont know what could be causing this, so I came here. What do yall thing it could be??
Tl;dr: When I fire my regulated mod, I feel a slight buzzing or vibrating in the fire bar and it's not supposed to. What is, what do?
I still cannot find it; as all my mods stop firing. Right now I'm using my first mod.The K100. It outperformed all of my other mods that I had before they all took a poop on me. Its crazy. Could it be the spring, that makes it so good? I have no idea. I tried the tugboat mod, it failed me. It stopped firing after a few days. And that thing hit like a champ. But this k100, seems to be knocking me out. Like taking a uppercut from Chuck Liddell. I just want to know if there's a magnetic k100 type mod, or should I just stick with this? ( I hate the way it looks BTW. Cause all I have is black rdas. )
OK so I got an aspire nautilus mini for free today (my close friend upgraded and gave it to me) and I was using it on my Istick 20 watt for a couple hours and then out of no where it started saying no atomizer and it wasn't firing at all and the Istick wasn't even detecting it so I put it on a Itaste VV and it wont fire on that either I have no idea what to do?
OK so I got an aspire nautilus mini for free today (my close friend upgraded and gave it to me) and I was using it on my Istick 20 watt for a couple hours and then out of no where it started saying no atomizer and it wasn't firing at all and the Istick wasn't even reading the ohms it just says 0.0 it so I put it on a Itaste VV and it wont fire on that either I have no idea what to do?
So do any knows if aspire figure out why the device is auto firing on it’s own. If not I been sitting and trying to figure out why? I been reading a lot and seeing people saying it’s a button malfunction, but I been messing with it. I seen that the air draw switch on top of the device goes inside air hole under the tank which controls the draw to auto activate was tilt and had juice around it. So I clean it and I reposition the switch back to the center. Mash it down to see if the auto draw react and it did and now it’s working properly. It could of been just me or aspire just didn’t understand there own device.. ♂️
Hi, just bought a little 18350 mech mod. It doesn't seem to be firing my rta's very well, seems a bit low on power. What are the best size coils to build for them.