Best Tank For Spinner 2

Just two questions.

Ive been using a Vision spinner 2 1100Mah for a long while now with a Kanger Aerotank V2 which has been very good and reliable.
I recently got a Kamry E pipe as a gift. The Kamry takes a 18350 battery.

Problem is there isnt a lot of difference in vaping between the two, this is with the same tank with the same coils on both. Is this normal? If anything the pipe loses vape sooner due to battery drain than the Vision Spinner 2. Is there anything i can do to beef up the E Pipe for a better throat hit and more vapour?

Which brings me to question 2.
Is there a good upgrade to the Kanger Aerotank? I want a new tank anyway to replace the stock Kamry one which is top fed and tastes burnt quickly, and i dont want to keep changing out tanks between the Kamry and the Spinner hence i need a good, ego threaded tank for the mech pipe. (Kamry k1000 is 510 threaded but i have a 510 to ego adaptor too)
Thanks in advance  

Hello everyone!

I have been an happy vaper now for 5 years. Like most of the old beginners I started with cartridges, blue foam, cartomizer and so on. Currently I am using Kanger tanks, T3, Evod 2, MiniProtank and Aspire ET-S BVC, with Vision Spinner VV but I am looking for an upgrade.
I am not looking for an RDA, nor big battery and definitively not sub-ohms. I'm looking more for a glass tank, adjustable airflow, large capacity, and the ability to see the liquid.
Thank you you all so much for any advice, and happy vaping!  

Hello just received new spinner 2 battery. I think I am burning my coil now it taste burnt. I have used spinner 2 for years no problems. This new version has more power has anyone experienced same issue. Do we just lower the voltage ? Or are better tanks needed or different
ohm coils? Thank you in advance for any help or opinions  

I'm currently using a Vision Spinner battery with a few ProTank mini 3's (Which look quite nice together infact - so long as the battery matches the tank). I'm wondering what I should upgrade too.. I'm not really looking to get into mechanical modding yet as I'm not made of money. I'm more or less looking for a better battery with a better lifespan, I'm having loads of problems with my vision spinner and I'm looking for something that could replace that.. Anyone have any good suggestions? Thanks!

Edit; I found this: Aspire Premium Starter Kit [VE754-B1] - £49.95 : Vape Escape and was wondering what your guys opinions are on it  

Alright so I bought a spinner 2.. checked the code on their website and it says it was checked 14 times.. does this make it a fake? Also I noticed it charges but always stays red never turns to green anyone else experience this?  

Hi.

I need some new batteries for my Aspire Tigon Tank. It has to be much like the Tigon battery.

Not big batteries and not small, cause i don't like heavey batteries, and it should give lots of vapour. It should be the cylinder shaped batteries.

Whats the watts on the Tigon? Is it 40? It should be the same.

And else should you notice? Do you also need to notice volt? Is does'nt need to be 1800 mah, but it should be high. Maybe least 1300.

And of course 510 connection.

Please name som models, that fit my description.

What about: Vision Spinner 2, Innokin Endura T18, Joyetech Ecxeed D19, Kangertech EVOD VV?  

Hi, folks. I've been vaping since 2009 and certainly went through years of trying new devices (Anybody remember the Screwdriver?) But I stopped keeping up with new products and technology once I found a set-up that worked for me.
I use an original Aspire Nautilus 5ml tank with BVC 1.8 or 1.6 coils and flavorless liquid that I mix myself. I've been powering the tank with variable voltage batteries such as the Spinner 2 or, more recently, the Kangor Evod VV 1600 mah. Both the tanks and those batteries have become increasingly harder to find.
Have to say, after the Screwdriver, I was never interested in getting another device with an external battery. But as we all prepare for the (senseless) demise of the on-line vaping industry, I've been trying to quickly learn about regulated mods. I need something safe and reliable that will take an external rechargeable 18650 battery and will also fit my Nautilus tank.
I know the technology has advanced light years. Frankly, all the info out there is pretty overwhelming.
I don't need a lot of power or tons of vapor. I tend to stay between 3.2-3.4 volts with the airflow on the tank wide open. I'm most concerned about quality since buying mistakes will soon be harder to remedy. (Some of the worst products I've purchased-- with the highest price tags-- were from local vape shops.)
Any suggestions for an APV from folks who also use the larger Aspire tank?
Thanks.
 

So hi guys I been vaping since April loven it so I'm looking get something different i got the ego c twist with aspire bdc clearomizer. What should I get next I was looking to get the vision spinner 2 and istick eleaf 30w or should i just get the istick eleaf 30w or 50w. I wanted to get the vision spinner 2 from fasttech with couple of other things but I'm going to get both.  

Love my Subtank RBA, but looking to explore.

So far the Lemo 2 is the best option in my opinion. Been wanting a top-fill tank for quite sometime too.

The Kayfun V4 looks beautiful, but i've read it doesn't handle sub-ohm too well?

What's the majority vote around here?  

Hey guys,

I originally posted this in the hardware specific section but haven't gotten any love so here goes...

I have been off real cigs for a few months now which I'm super happy about, no desire to go back. I kicked the habit with the aspire K1 Ego tanks and since upgraded to Nautilus mini which I enjoy, I'm primarily mouth to lung hitter. In between the two tanks I was sold an Atlantis by a local B&M, the guy said most buy a Nautilus mini then upgrade to Atlantis anyway so he said it would save money. I couldn't really get into it taking lung hits and still really don't enjoy it but am wondering if my technique is off?

I tried 12mg juice in there and it was really rough, I've since dropped my nicotine to 6mg across the board, and tried that in the Atlantis, it gives a harsh mouth and throat feel if I try to lung hit, I also get the same experience if I use 0mg juice. I've tried MtL hits and it doesn't really produce any vapor. Attempting lung hits I've tried all wattages from 15-30W with same results, also I keep the airflow all the way open. I try and inhale deep and quick thinking more airflow might 'dilute' the vapor and make it feel less harsh. Also this is Atlantis1, and I've only tried max or 100%VG juice.

What technique/settings do you guys use and what should it really feel like doing lung hits on this tank? When he sold me the tank I used it once in the shop and it felt very very smooth on the inhale and smooth on the exhale as well as very dense and tasty and pleasant, for the life of me I can't replicate it. Alternatively, is there a tank or RBA/RTA/RDA I can try for MtL hits that will produce that really dense vapor feel?

TIA for your help, I know it probably sounds like a newbie question lol 'how do I use my tank' but I am stuck!