My Nautilus Is Shipped

No it's not the drunken camel's Hump Day..


Ok


it's Ed and my ONE YEAR Vapeversary today!!! WOOT WOOT!!!
 

Does anybody else on here feels once they start their new journeys with sub vaping they can't stop and find it hard jumping back to their old tanks set ups ? I'm just wondering what people views are on the subject.

I mean i have 2 set ups my Nautilus on my Vamo 5 which i been vaping with for 6 months now, it was good the Nautilus was my baby to the Alantis came a long. If i vape on the Nautilus these days it feels like i'm smoking a weak roll up ciggie.

The Alantis gives a great nice vape but the downside is you always filling the tank up, i mean i can get a night out the Alantis before having to refil. But the experience is far more advanced then anything the Nautilus set up can give me.  

what up vaperoos!...

in my 4.4ml tank i put 1ml of 8mg strength nic juice and 3.4ml of 0mg streght of nic. What strength am i actually vaping my juice at.? >

I like this:

Woot WooT!!!!!  

Hi all. I've been thinking of trying the Aspire Nautilus tank on my MVP 20w since I've read so many good things about it here. I'm doing mouth to lung vaping and I have an iStick 30 on the way too.

I just want to confirm the Nautilus tank will work on both mods? And what replaceable coils should I get for the Nautilus? Thanks!  

Hi guys

Another day another question...... What's the maximum wattage the Nautilus will vape safely at ? Last night i decided to purchase a ZNA 50 mod after reading a thread on these forums. I recently got a Alantis + Sub Ohm battery Valentines week, i'm definitely getting more into vaping with the Alantis a month in. More flavour more of a enjoyable experience all together.

I bought 0 mg Nicotine Apple juice for the Nautilus by mistake so re ordered etc the right strength. While i was waiting i just vaped on the Alantis, yesterday went back to the Nautilus and the experience wasn't really enticing.

I was thinking going with two Alantis tanks hence the reason why i decided last night to go ahead with the purchase of the ZNA 50. Now i'm wondering if the ZNA 50 will improve the Nautilus regarding flavour ?

I like my flavour being a menthol smoker, if not i should be able to use it with the Alantis and buy another tank and have two.

I use the Nautilus on a Vamo 5 that can only go up to 15 Watts. What's the maximum in wattage the Nautilus can do ?  

I have a full sized Nautilus, and a mini, but I don't use them because of the concern surrounding the material in the coils. I understand that at some point, Aspire is going to be putting out all-cotton versions of the BVCs. But until that happens, I'm staying away.

I happened upon the Smok Acro 5.0 on Madvapes website, and it said its coils are compatible with the Nautilus. But I can't find any information about them. Does anyone know if the Acro coils are BVC? And what materials are used?

Acro 5.0 Replacement Atomizer Coils  

So I've had a few various egos here and there, and I've loved them. My favorite has been the Aspire CF mod I currently have with the nautilus mini. I feel like it's about time to step my game up. Kinda.

I want to get into sub ohming. It looks fun and the vapor is impressive. I'm not normally one to vape in public, but at my desk at home it'll add some more fun to vaping I think.

I just don't know where to start. I don't really want to build coils or anything like that. I'd rather go with a tank that can sub ohm. Down the line I'll start building my coils, but now I don't want too. I want to see if it's really for me first.

So my question of the topic. What are some good kits that are basically starter kits for this? I've been looking at the ego one, and the aspire cf variant. The aspire is a tad too big, so I don't really want that. And to be honest I want more of a box mod.

I'm looking to spend around 70 for everything. Anyone want to suggest me a good box mod and tank kit that'll help me sub ohm? Thanks for any help!  

Curious if any of you have gone to the Kanger Aerotank from the Nautilus Aspire tank? I have two Nautilus tanks and I have to say it is real hit and miss when I change the coils out. Sometimes I will have a clean hit and no burnt taste and other times it is burnt tasting for the life of the coil. A local vape shop told me to switch to the Kanger Aerotank. They did not have it in stock so I ordered it to try. Yes I am doing the whole prep scenario with the drops and hitting it 4 to 5 times before hitting the button. He told me it is common with the Nautilus, but not with the Kanger Aerotank. Any feedback?  

Greetings, while looking through my photo archive I found images that help show my beginning steps in vaping. I need to point out that during the work day I use losenges that I get from Costco so only smoked in the mornings before work and the afternoons after work.

Here's the first one taken July 6th 2015:


In March/April of 2015 the other half started complaining about my cigarette smoke. She had a eye issue that she found was sensitive to the smoke when returning from visiting her daughter. (she would get used to it but would complain when he first got back)

Looking to solve the problem possibly with Vaping, I picked up a Blue kit and some extra cartridges from (of all places Costco). It was not all that expensive and the batteries (or cartridges) did not last very long or put out much vapor. They did have a "coffee" flavor I did like. I continued smoking.

Next time she left for a few days with her daughter I dropped by a local vape shop and for ~$75-100 (I forget) they set me up with a iTaste CLK!, Aspire K1 (and Maxi) and 15ml of 18mg Strawberry juice. While it took 3 days to get used to the charging/refilling/exc of the setup I quit smoking with this setup. The 1.5ml tank and mere 800mah battery were the main limitations as well as "glassomizers" really did not put out much vapor.

With in a few days I'd upgrade the tank to a Nautilus mini and shortly afterwards I'd get Full sized Nautilus tanks and the Blue tube mod shown in the center. While this mod was a good match to the Nautilus tank, I grew tired of swapping 18350's so bought the other two tube mods to the right. One could take ether 2x18350's stacked or a 18650 and the Vamo v10 on the right could take a stacked set of 18350's.

By July of that year I had given up on "drop in coil" tanks (the store bought juice I was using was killing them in as little as a few days) and had decided to take the plunge into RTA's and into temperature controlled vaping.


At the time the two leaders in TC vaping was DNA and Yihi. I bought a SXMini ($200) and three different popular (at the time) tanks: Atlantis, SubtankMini and Lemo2. Two of the three could be used with factory coils or a RBA head, the Lemo2 had the unique feature of top fill. (I still use a Lemo2 today!)

Back in those days if you wanted to TC, you were going to do it with Ni200 wire. I decided I liked the 28AWG. A few weeks later I had added two more mods:


By this point in my vaping journey I was developing a few habits: I was 'marrying' a flavor with a tank, a tank with a mod and all battery charging was being done via USB port. I just cycled complete setups on two USB charge cords I had. Others liked complaining about the SXMini's battery door but I had no issue with it as I'd only used it once.

Sometime that summer (or was it fall?) I got tired of paying the outlandish juice prices and decided to make my own. Granted for YEARS I simply made 7mg or 18mg unflavored 100% VG juice but the cost savings allowed me to get dozens of different tanks and mods to play with and try out.

By April 2016 I took this image:


TC vaping had evolved from from Ni200 wire to Ti to NiFe48 and SS. Early TC mods only supported Ni200 (and some Ti) and newer ones supported SS. Mods I've bought had to have a user programmable TCR value. I've been exclusively using NiFe48 for years.

Finally by about 2019 I decided to get into vaping flavors. Knowing that RDA's or Squankers give the best flavor, I outfitted myself (Bullcity flavors) with a bunch of squankers and now have the option of vaping flavors. (many of my squankers are in my profile image)

NOTE: only one mod in the images I've shown is dead and no longer able to be in service.

These days I have mods scattered all over the house but in/for 5 main areas: morning coffee, home office, watching tv, night stand and to take with me in the car/truck.

Thats my story and journey - happy vaping!


g.  

I have had my istick 50w for about 24 hours now. I the issue I am having is that all my 1.8ohm tanks are reading 2.0ohms on the display of the iStick. This is the case for my Aspire ET-S and Nautilus Minis. On two occasions the Nautilus tanks have read 1.9. Never 1.8. Even with brand new coils. I get the same result on 4 Nautilus Minis and 3 ET-S tanks. I get the same results with the mod turned off when I screw on the tanks as I do with the mod turned on. Any ideas or suggestions?