Yep, I'm Hooked

So....been vaping for 6 years.

For the last couple years I was using a Reo with an RBA at .5 ohms and was going through about 12-15ml a day. A friend of mine let me try his sub ohm tank a few weeks ago and I was hooked! The flavor was better than my Reo/RBA setup and the vapor was OMG.

Anyways, I've since bought a couple of sub ohm tanks with an IPV2 Mini, then graduated to a Goliath RTA with an SX Mini M Class. Using the Goliath with a .44 ohm dual coil at 30 watts on the SXM and I'm going through anywhere from 25-35ml a day! This just seem excessive....

Can anyone recommend an RTA that would use less juice but still give me a lot of airflow and flavor? I'm not all about the vapor, although I do enjoy it.

I'm guessing that if you want lots of airflow (I'm a direct lung inhale kinda guy) and a warm, full vape you pretty much have to vape at higher wattages/lower ohms and therefore use excessive amounts of juice...just wondering if anyone else has had a similar experience and has successfully cut down their juice consumption.

FYI, I DIY my juice so cost is not really an issue...I'm a bit concerned that using this much juice every day just can't be good for you.  

Hey everyone,
I've been vaping for about two years now, and have decided to start dripping. For the last few weeks, I have been dripping on an IGO-W, 26G Kanthal single coil (7 wrap micro coil reading at 0.8ohms) on my iStick 30w.

I just recently purchased a new battery that should arrive today, and was wondering if anyone had advice/tips on producing some fat clouds! Dual Coils? Different coil builds? Number of wraps? Watts to vape at? I think you get the picture lol.

The items I will be using are as follows:
-SMOK XPRO M80 Plus
-IGO-W
-26 Gauge Kanthal Wire
-Japanese Organic Cotton
- 80vg/20pg Juices

All input is greatly appreciated. Thanks!
-Tyler  

Hi all. Been vaping over ten years now, this Forum was tremendously helpful to me when I got started but haven't been back for awhile. I need help on a new setup. Ive been vaping on 510 dual coil cartomizers, double punched, in a tank for years now but the carts are almost impossible to get now. I am a mouth to lung vaper and use a 40W box mod at 7.7W with a 1.5 or 2 ohm cart. Started at 24 mg juice but down to 4 mg.
I am technologically challenged so hopefully I got all that right.
Anyway, can anyone recommend a setup for me to replace my precious carts? There are SO MANY options it's hard to pick.  

I used to be one of those who thought the whole dripping thing was dumb.

After getting tired of buying coils for my atlantis, I decided to pop in to the store and pick up my first RDA.

I settled on the dark horse. I watched a short tutorial on youtube and built my first coil at 0.6 ohms.

Safe to say the atlantis and nautilis will go into retirement today.

I have never felt a nic buzz from vaping, but I can actually feel a buzz off this thing : I vape my atlantis at 3mg.

Also I love that I simply have to re wick and drip to try new flavours, and best of all NO MORE BUYING COILS.  

I've been using only twin-18650 mods for some time, and before the shipping ban came into effect, I bought a backup of my most-used mod (a Geekvape Aegis X), but since the 100W single 21700 / 18650 Voopoo Drag X Plus was only $35, I also picked up one of them as another backup.

I vape exclusively on RDA's, typically with a 3mm dual coil twisted build with 24 or 26 gauge Kanthal or nichrome-80. 5 or 6 wraps with 24 gauge, 6-8 wraps with 26 gauge. I typically vape these between 90 and 110 watts.

I did not expect to get a 'true' 90-100 watts out of the Drag X, so I set a target of around 60 watts. I mounted a 3mm dual coil twisted 28 gauge build with 6 wraps, which on my Aegis X vapes great at 60 watts, and very good at 50 watts. It measures at 0.45 ohms.

But on the Drag at 60 watts, it only vapes at what feels like 30 watts on my Aegis. Setting it higher makes no difference either, it seems to 'top out' at ~30 watts regardless of the setting. 60 watts @ 0.45 ohms is only around 11 amps, so I doubt I'm hitting an amperage limit.

I am using 18650 batteries (VTC5A), and it is about time to replace them, as I am only getting around 70% the battery life as I did when new. I will be picking up some 21700 batteries at the same time, which hopefully help with things on the Voopoo.

Does anybody have any good experiences with ~60 watt builds on a Drag X Plus?  

so in my pursuit of vaping above 200 Watts I made a fuse 3x24ga gauge wrapped with 36 gauge and I tried three coils. it came out .07 I Vaped it at about 375 watts it was a hot vape but the ohms were very low so I had a problem with power my DNA 250c was reporting 65 amp output so I took that and put in dual fuse 22ga gauge wrapped with 36 gauge I ran that build triple coil I used it at about 250 Watts. what I am trying to do is vape at about 300 to 400 watts with an ohm or .2 to .3. the inner diameter will be 5.5 or 5 mm I'll be using the kanthal core wrapped with 36 gauge and ni80.I'm trying to figure out what my next bill should be to try to vape above 300 watts the restrictions I have is it can't be below point 1 ohm or above .3 ohm I have two aromamizer plus has with the series deck The parallel deck a second parallel deck and a single coil deck. The single coil deck fit 6.36 mm.

I also have the aromamizer titan.

What gauge would you Clapton?

Sent from my HD1907 using Tapatalk  

So today I bought a pack of cigarettes . I havent smoked in a long time and i feel like vaping has turned me into a complete nicotine addict and this is why I bough the pack , I wanted to test myself since I know how much I use to smoke . Ever since I started vaping I have been increasing strenght and quantity of juice per day and I vape a lot , some days , I would vape between 10 - 15 ML of 6mg juice and absorb another ML though my skin while building . I smoked my first cigarette in almost a year and I finished it and guess what after that I wanted another one but I didnt take it .

Well before I started vaping I was smoking one cig every 2-3 hours and now I want way more . I am honestly considering quiting vaping and smoking all together , maybe 1 cig day , that would be it . Or maybe I should switch to non rebuiuldable tanks and stop making my own juice because I honestly feel like DYI and rebuildables is what made me vape more , trying different build on different attomizers , trying my new DYI e-liquids , trying other e-liquids that I bought , trying this , trying that , and at the end of the day 20ML of juice gone .

What would you recommend me ?  

well I finally got it in the mail today. And have really enjoyed vaping on it. Right now I just got the atlantis V2 on powerful plus mode. My atlantis nickel coils should be in Thursday so I can try out temp control in a couple of my tanks. I've also decided to try my hand at building even though I swore I never would. Got the mutation X V4 on the way as well. Hopefully this is a decent deck to build on. I am not a beginner really, I have wrapped a couple coils for my buddies and did a few builds on their attys. This vaping thing can get expensive! Vape they said, it'll be cheaper than smoking they said....pffft. lol
 

A quick back story to start. I was a 1-2 PAD smoker for about 5 years. I found vapes and quit smoking. I was able to stop vaping and smoking for 18 months until I picked up smoking again for a few years. I have once again been able to stop smoking and started vaping again. Simple transition, some willpower for sure, but I have kicked the habit completely. When I started vaping again I purchased an Istick 50w and a troll. Have been using 3mg liquid only. It's been about six weeks smoke free again and I want to, not only upgrade, but reward myself. I read and read and watch reviews non stop, my head hurts from all of the stuff out now. I use my mod consistently at 45 to 50 watts. I have a 0.4 dual coil build and a chuff top. The heat from the vape is less than perfect, but I like the vapor production. I am interested in temperature control as well. If I need to buy two mods to have everything I want, so be it. Not that money isn't an issue, but right now it isn't a factor. I have been looking at IPV3, Sigeli 150, IPV4, Mech Mods, you name it I have looked and can probably tell you the specs off the top of my head. I just can't decide! I need your help ECF! I know I want at least dual 18650, as my Istick lasts maybe half a day until I need to charge. Good flavor and large vapor production atty, temp control, and good ergonomics. Thanks in advance for all input and help.  

So I've got a bit of a convoluted question. I've been vaping for about 8 years and followed most of the trends. Spent a fair amount of time in deep subohm territory with freebase juice, low nic levels, lots of thick flavorful clouds. Over the last two years I've gravitated towards the salt juices with the tiny mods and PIP coils. The cost of replacement coils is getting annoying when combined with the cost of salt nicotine juices in comparison to the freebase bottles I used to buy. To address this I've tried building my own high ohm coils on the SMOK Rpm rebuildable head. Results have been less than satisfactory.

For what ever reason, even when I can block the airflow and build a high ohm coil..the flavors in salt nicotine always taste awful, nothing like what they taste like in the rpm 1.0 coil. As near as I can tell, the only reason I can think of is the different style of wicks..inner cool wick for a DIY vrs outer wick for the smok prebuilts.

This got me thinking of building a juice that's a bit heavier and smoother with a higher vg content and flavor content to work in a DIY coil (prob something simple like a single 26-28 gauge spaced wrap) but still pack some of the nic punch (sans throat hit) as a salt based juice..and will still work in a pod device. I'm thinking it would probably need to be in the 12-15mg nic range to get a similar buzz as the 25-35mg nice I usually vape at low power.

Is this even feasible..or are the flavors and thickness of the old style free base juices incompatible with salt based nicotine? A 40pg/60vg juice with a 12-15mg salt nic level that will work on a .8 single coil at 10-15 watts or so I think. And not taste awful.

In my state it's becoming problematic to source flavors other then basic tobacco.. so it might be time to go strictly DIY with a pod type device.

Thoughts?