Hey all finally made the move to rda I am loving the flavor and hits I get. I got a tub boat clone and a mutation x v4 love them both . It was suggested by the vape shop to upgrade to a stronger box. I have a eleaf 50w . I would like to upgrade but not sure witch way to go . Is there anything new comeing out I should wait for or just get a ipv4 or ipv3 because it is 150 watt or go for the sigelei or any other suggestions thanx in advance
All of the sudden I wake up today and notice my 510 threading on my sigelei 50w box mod is jacked up. I cleaned the threads on my subtank mini and on my sigelei mod. I then tried screwing it onto my mod and now no matter what I try , there's a gap between the top of the mod and the bottom of the subtank (it's not screwing down all the way and has about a 3mm gap, hence now it won't fire...
I screwed my subtank onto my ileaf 30w and screws in flawlessly, so it's the sigelei threads ...
but I did pay a lot for my sigelei and prefer its hits , I dunno, I usually Vape about 16W on my sigelei And not sure how that translates over to what wattage I should run the eleaf at ?
Also, I just noticed that my spare RDAs will still screw onto my sigelei well..I'm so confused what's up !!!!
Hello everyone, i have a dark horse rda and its pretty nice but im looking to upgrade. I was thinking about a mutation v4 but ive read and seen its meant more for flavor. I love good flavor but prefer huge clouds and strong throat hit. Doesnt matter if its a clone or authentic. Would prefer if it was kept under 40 shipped, 50 is pushing it. TIA.
Hi all first off like to say thanx to everyone who answers my newbie question. You guys been alot of help. My vapeing knowledge is improving. Now I have another one for you guys . I am looking to get the most flavor out of my vapes. I own a ipv4 a mutilation x v4 a tugboat and kanger submini and a eleaf 50 watt. I have 26g kanthal 24g kantal . What is any should I get for more flavor . What kinda build should I do ? How many wraps? Please give me a full Break down on the way to get best flavor possible . Juice with more vg I am so new and lost thanx in advance
Hey all. Been awhile since I’ve posted but I still snoop daily. Happy to say that this month makes a year off the cigs!!
I’m hoping for some advice on a setup I’m considering upgrading to.
For awhile now, I’ve been rotating a nautilus mini between my provari mini 2.5 and an istick 20w. I find I still get a more consistent flavor and vape on the PV but the istick comes in handy when I’m out and about. Ultimately, I’m looking to enhance my vape experience and hope to get more flavor and more vape production. I typically vape 70VG/30PG 6mg nic juices
I’ve been thinking of moving on up to a kanger subtank mini (found on sale for $30) so I can begin to learn how to build coils, etc. in hopes of saving some extra $$$ on replacement coils down the road. I’m also considering upgrading to a Sigelei 50 Watt VR2 (found them on sale for $50) so I’ll have plenty power for the tank. However, I have no experience with the Sigelei’s, just see that they are a fairly popular box mod with the community and online reviews. Also found the Sigelei 150w on sale for $80 but feel it may be too much for my needs.
So here’s my questions to you fine folks:
- In your opinion, do you think this setup (subtank mini w/ Sigelei 50w VR2) would be a nice upgrade for me based on the price? I’d really like a good setup that I can use to begin learning how to build but also want a mod that is powerful enough so that I won’t feel like upgrading a few months down the road. I also like the fact that I can still use/buy premade coils.
- To build a good sub ohm coil, what supplies are necessary such as what gauge/brand wire, cotton types/brands, tools needed, etc. Keep in mind that I’ve watched a few videos on building coils for this tank but am a complete novice and would need to purchase all the supplies/tools.
- Also, what are the best/safest 18650 batteries to power the sigelei?
I realize that I could probably search for this information individually through this forum and various review videos but am hoping for some additional input/opinions as well. Plus, there's so much information available online it becomes overwhelming and confusing to a noob such as myself.
Thank you in advance.
I've been vaping with v4l and v2 e-cigs for a couple years mostly the ego style ones. I love messing with all the technology I have and I'm very hands on so I figured I'd stop limiting myself. I bought a Sigelei 100w Plus, Kanger Sub Tank Mini, and a Mutation X V3 RDA.
WOW
I feel stupid for not doing this earlier. I've been vaping 12mg for a couple months now, but bought 6mg for the Sub Tank and RDA and that is even too strong! I diluted it with 100% PG to make it 3mg and it is much better. I couldn't be happier. No dry hits.. no leaking... all the problems I've dealt with over the past couple years are gone and I'm experiencing vaping like never before.
Success!!
Plus I finally convinced my GF to start vaping on New Years Eve and she hasn't looked back. She's using the V2 Pro Series 3 which she loves and we even found some really good house made flavors at a local vaping shop that we really liked. She got cotton candy and I got cigar. I didn't think a vape shop would have juice that good and they even made it fresh right in front of us. To my surprise no steeping required!
Alright I'm rambling. I will leave you with this pic.. and to all you musicians out there that is a ART Pro MPA II preamp with genuine Telefunken tubes from the 60's.
20150316_191947 by joshfiricano, on Flickr
So I'm looking into buying a temp controlled mod for my next purchase. Ideally, I would be getting the VaporFlask with the DNA40 board. Problem is, I dont have $300 usd to drop on it. Sooo....
I was thinking about the FT clone, and was about 3 clicks away from making the purchase when a friend tells me about the IPV4 pre-order over on the bay. The DNA40 has temp control and goes up to 40 watts (duh) but from what I have read, the IPV4 also has temp control and goes up to 100 watts. I'll never use all 100 watts BUT sometimes will vape above 40 watts. I like that both are dual 18650 and have the temp control function (I'm dying to play with some nickel wire) I'd really like some opinions
Any thoughts on the VaporFlask clones from FT? Would it be worth it for me to wait for the IPV4?
Cheers ECF!
Hey guys, i have a mutation x v2 RDA on a sigelei 100w mod. I'm somewhat new to building, i'm not great, but im not terrible. I've been looking for an easy build that i get some good clouds and flavor on. BUT i want to be able to take nice long draws without drying out my wick too fast. I currently have 28g and 26g kanthal. Suggestions?
Hello there and good morning
I used Sigelei vape application for windows to change the stock background of Sigelei top1 & I want to change back to the stock backgrounds
Can you please tell me how to do it as I tried restoring factory defaults and flashing the firmware but backgrounds stay customized
Thanks in advance....
For those of you with a IPV4, Jwraps now has wraps for the device. Enclosed is a pic. They are 18.50 but when you choose IPV4 depending on the wrap it will subtract $3 to $6
This is bad, and what's worse is I know it's bad but I can't seem to stop. I keep buying mods and tanks and juice and accessories. I've been vaping for almost a year now and for the most part I was happy with my setup (once i got past the cheap ego battery setup I had). I was rockin an MVP 2.0 and a nautilus tank. Loved every second of it. But recently the MVP threads got messed up so no tank would connect to it. So I decided to upgrade my setup and get a Sigelei 150w. Now THIS thing is amazing.
You would think since I was happy with my setup that would be enough. NOPE! I ordered an RDA (Mad Hatter) to go with the sigelei because the nautilus just wasn't fully utilizing the mod. I ordered wire, wick, ohm meter, the whole kit and kaboodle. But I also ordered an MVP 3.0 Pro for the times the sigelei batteries were dead or I just needed a smaller device. Got the MVP in today and it's amazing. I definitely love Innokin products.
That's it though, right? NOPE! I haven't even recieved my RDA yet and I was browsing the interwebs looking at forums and reviews and came across the Kanger Subtank Mini. Looks awesome. So I ordered it. But not by itself, oh no no no, I saw a kit with a Kanger Subox Mini and Subtank Mini starter kit. So I ordered it. Oh god will the impulse buying ever stop!?
Let's not get into my juice collection. I have more bottles than I know what to do with. Originally it was a handful of bottles that could sit on my desk, now I've had to rearrange my dresser so the multitude of bottles can sit up there. I have so many flavors that I love that I keep switching them around and it's driving me crazy. And everytime I see one of you post about your new favorite all day vape flavor I look into it, think it sounds amazing, and end up buying more.
Aww screw it, I love vaping. I'm sure i'll buy something else real soon. Speaking of which...I could use a new drip tip to go with my new tanks. Gotta go.
(thanks for reading my rant)