The Rabbithole Of Temperature Control

Was watching a movie, pretty into it, wanted a vape so I grabbed my mod and had a vape. Well,I had just rebuilt my dripper,a twisted 28 ni200 w/10 wraps (so a big ol coil lol) and had been checking it as I vaped for hot spots or anything else not awesome. Apparently I didn't put the top cap back on after the last inspection, so when I grabbed my mod and took a vape, I was vaping my upper lip! Sizzling sound and all! I've got a perfect coil-sized mark on my lip right now lol. It's always nice to be reminded that I'm no genius lol. It doesn't hurt and is in no way a "real" injury.
Anybody else ever do this? Anybody willing to admit it or anything like it?  

So I decided to get another clearomizer and the Donner by Amigo Itsuwa is what I got to replace my Aspire Atlantis.....
So here are my thoughts on it and it's just My Opinion:

Holds 4mls of juice - holds more juice so I'm not refilling my tank 2-3 times a day
.50hm Coil head is cotton & Kanthal wire & a wire mesh around the opening for better wicking ( You can use Atlantis coil in this thing and it's better in this tank then it is in the Atlantis) It comes with 2.
There's no notches or trying to center the coil head. It sits in the Clearo and just sucks juice lol
Great Flavor sub-ohm - The flavor you get from this is amazing, I was a little taken back bc I chose a sour raspberry and it really was more sour tasting then in any of the other tanks I had the same juice in
I personally like the drip tip but it's not for everybody
Adjustable air flow control is a wide slot - It's a slide around, but the draw from almost closed to full open is nice any way you wanna vape.
Vape production is great I use 10/90vg - 20/80vg


There are some things I don't like about this tank...
Priming the coil is a process - on a fresh coil the directions state to drop a few drops onto the coil, then once tank is filled let sit for 1-2 minutes prior to use. On your second fill of the clearo you have to let the coil sit for 2 minutes b4 use....I kinda wanna fill and vape, not fill and wait
Holding 4mls of juice is great, but if you can't vape 1ml of juice at the bottom of your tank it sucks. You can't vape the last ml of juice because the coil head sits to high so it can't wick the remaining juice.
I did find that when I put the Atlantis coil head in that the wicking was alot better then the coils that it came with, now this could be bc I am using a high vg juice.

So let's talk price....I bought this at a B&M so I paid A LOT more then what I've found online.
My price was $45.00
I have found these online for as little as $23.00
and for this price I would probably buy it again, not for $45.00
Iv'e been vaping on this for about a week now, I've gone through 2 coil heads in 4 days & now put the Atlantis coil head in it and am having better luck with it.
So there's my thoughts on my new clearomizer.  

So I purchased the eGo One after hearing amazing reviews of the device. I use an Aspire Atlantis on an MVP 3 but needed something more portable for work/going out. I was more than impressed with the eGo One using the .5 ohm coil, and equally so with the 1 ohm coil. The battery life is great, the flavour is perfect and the vapor production is unexpected. However, within 2 hours of using the .5ohm coil, the vapor began to taste burnt, more than on any other wick I have burnt. So until I could get hold of another I used the 1 ohm coil. 24 hours that one lasted. Joyetech said they would send me replacements free of charge, but while waiting for this I went to my local shop and bought another .5 coil. 1 HOUR LATER, it's frazzled. Wether I'm just being unlucky or the device is faulty I don't know, but I am incredibly disappointed. It's not through a lack of priming or using the wrong liquid, I'm an experienced vaper and had fully primed the wicks for 20minutes minimum and was using a 50/50 juice. This device had great potential, but it will be going in the bin for now (except the battery, which even does a great job on my Atlantis)  

Hey there guys, new here.

I have a Vappresso Revenger Mini kit and I have upgraded my tank from NRG SE Mini tank to a "Geekvape Z Sub Ohm tank(Much Larger Tank)". Because I wanted to taste more flavor and still blow lots of clouds in the air with my vaping device being fairly cheap.
I put a New Geekvape Z series coil 0.4ohm 50-60W because I burnt my original 0.2 Ohm coil , I wont talk about my previous coil. I'm getting 2 problems here.

1. I'm using 60W, normal setting and every time I vape or inhale I get a taste of E-Liquid in my mouth. However its blowing perfect clouds and still getting an amazing taste but its just that the liquid drops in my mouth. I just want to spit it out every time. How do I fix that problem?

2. The other thing is if I use Higher Wattage and High settings the liquid pours out of the air flow and starts leaking and backspits in my mouth.

(Before I vaped with new coil)I put the new coil in, I soaked it for 10-15mins, while I fill half tank of E-liquid which is 0.8Ng/0.2PG. Then I inhaled 3-4x with no button pressed. Then I vaped to test, still leaking. I set the vape to 70W and high setting then blow downwards into the device 5-6x. All I was trying to do is desaturate it. My results got better didnt notice much of a leak but I still get a little bit of liquid in my mouth. If you can help me out here, I would much appreciate it.

Thank you and kind regards

Tuatara Vaper  

I am trying to get the best flavor with the best single coil build.

Objectives:
Flavor Smooth Vapor
Materials:
Kanthal Wire 35mg Nic Salts
I have noticed that either depending on the diameter of the coil or the spacing of the coil wraps You get a different kind of vape hit. It seems like higher gauge wire produces a smoother hit. And then couple that with a small diameter coil build, plus squishing the coil together to remove all coil spacing results in the smoothest possible vapor.

Can anyone confirm my findings? Or does anyone have any tips because I have still to replicate the smooth hit from clearomizer sub tank cartridge's that are non mesh. I am starting to think this is because the cotton is wrapped around the outside of the coil instead of being shoelace through the middle of the coil.  

So, like everyone else, I have my preferred juice (extremely complex DIY with all NET flavors) and my preferred all day driver (Subtank Nano and an Ego One 1100 mah battery). It's performed GREAT. I use prebuilt OCC coils and I rebuild those coils, too. Most of the time, they work just like they do with any other rig... they hiss (like all atomizers) and pop and crackle... part of the nature of sub ohm vaping (I use the 0.5 ohm heads, btw).

Once in a while, the stars align and the vaping gods smile down, and NO popping. I have to actually fire the device for a while to make sure it works. The telltale hiss is there, just no popping. It's happened with prebuilt coils and coils that I've rebuilt. Not sure what the deal is, but the vape is SOOOOO much better.... flavor seems improved too, but it might be mental.

Whatever the case, thank you, vaping gods, stars, fates, or whatever. That occasional perfect coil is nice.  

sup, thanks for reading . I'm vaping for 3 years now, never had problem until now. I taste saltiness on my tongue after vaping for more than 10 seconds. I thought it might be coil so I changed them all. Maybe juice so i tried different ones different flavor. same thing.

I vaped for 3 years just Pomango and Menthol. Never had that problem. Recently I got into DIY Mixing so i ordered 14 different flavors and started experimenting. Mostly Peach, Mango, sweet mango CAP, Green Apple, Pomegranate. never went over % than whats recommended. After sweet Mango flavor CAP 5% solo flavor it started. I thought maybe its the mango flavor so Itried others and same thing, even Menthol. So its definitely something with my taste. I tried to eat lollipop candy and its there but barely noticeable because of the sugar from lolipop. Hmmmm.... Is it because i started experimenting with other flavors and I have so called"Vapers tongue " thingy?

When first time I tried mango and green apple , OMG it was spectacular taste!!!after few weeks now just salt mix with touch of sweetness and a litlle flavor on my tongue and I do let it go thru my nose and stuff too , to get most out of vaping experience, menthol is the strongest from them all that stays but its not the same as it was few weeks ago.


anybody had same issue? I found the thread from 2011 the guy had same issue.


18 days vaping - all juices now tasting salty sweet, but not in a good way.

I do feel,menthol,peach and other fruits flavor for 3-6 sec just after 10 seconds it becomes kinda salty on my tongue and lets see, umm upper patella of the jaw you call it? yeah... and im loosing flavor, very frustrating....

anyone can explain that or had similar experience?


thanks  

I smoked menthol cigarettes for 45+ years. Never cared for the taste or smell of cigarette tobacco, but I liked my menthol. When I tried Blu ecigs, the tobacco didn't taste like tobacco, it just tasted "meh". The menthol flavor was more meh with a mentholesque hint, and they were a freaking hassle. When I finally realized this weird vaporizer shop across the street from the hospital and next to the ambulance company actually sold E-cigarettes, not those things you steam up a room with Vick's Vapo-Rub, I went in and told them about my experience with Blu's and asked if they had anything better. I walked out with an eGo starter kit, some fruit flavors, and some menthol and mint juice to mix with them. Success! Got my menthol/nicotine fix and was able to put down the combustibles! For a year and a half I've been doing the same thing only DYI: Fruit and menthol and/or mint. Just had to have that menthol feel or it didn't do the trick for me.

Last week I got a bunch of new flavors from MFS. I mixed up some desert coffee and a key lime pie concoction, no menthol or mint, and it was GOOD!

Now if only somebody would tell this stupid spell checker there is no "u" in flavor!  

This mod company claims temp control with any kind of wire ! I don't know about the rest of you but i think this would be pretty awesome if it works, what do you guys and gals think? Also it seems to monitor juice level and will flash a reminder to refill juice.




Asolo Specification:

1. The mod can support almost all tanks from 0.08ohm~2.5ohm.

Remarks:
It can support 0.05ohm but we are not recommend you to do it because it may be dangerous.
2. It is various device from 5w~200w
3. Heating coil material: KANTHAL A1, Titanium (Ti), Nickel (Ni200), other normal materials for wire

Asolo 200W_Shenzhen IJOY Technology Co.，Ltd. - Ijoy e-cigarette/Most electronic cigarette manufacturer innovation  

I searched long and hard for my perfect vape...and I sort of found it. I have a REO with an RM2, a dual 18650 mech, and now a SMPL mod. I also have a derringer, MXv3, hobo, and magma. I've been using the REO and drippers almost exclusively with the exception of my "morning vape" in an EVOD/eGo combo. I tried using my subtanks on my VF clone the other day and just can't seem to dial them in to taste good anymore. I either fry a coil or the juice that use to taste good in them doesn't anymore (or I can't find the sweet spot). I'm using the 0.5ohm coils in the subtanks. I run anywhere between 0.5 and 1.2 ohms in my drippers with 26g or 28g.
Did anyone else run into this problem or is it just me?


Sent from my iPhone using Tapatalk