I was just wondering how long the oled screen stays on after you let go of the button. I lef go of the button after taking a hit and the screen stays on a long time before it turns off. How long does it take for the screen to turn off automatically?
I have an orbit cannon vape pen. I believe it's 510 style.
I bought it 5 months ago. I just got around to using it. You press the button 5 times, and it turns on, press it 5 more times and it shuts off. The light also indicates the battery voltage. It turns white when fully charged, and then blue, and then red when it's almost dead. There is also a light on the charger that is red while it's charging and then it's supposed to turn green when it's done charging.
Well, the e cig battery light stays white for a short while, and then turns blue. It used to stay white longer. It's like after a short bit of usage, it goes blue. The red light on the charger also never turns green no matter how long it stays plugged in.
The e cig stayed in the box, and the battery was depleted. I picked it up a few days ago and put it on the charger to start using it and noticed this.
Does it sound like the battery is messed up? Last night I charged it 3 hours and the red light on the charger never turned green so I unplugged it. The light on the battery was white. Today I went to use it, and the light was blue - I never used it and the e cig itself was turned off.
I accidentally locked the up and down buttons by pressing both of them simultaneously for 2 seconds, I have tried unlocking them by doing the same thing like the instruction manual calls for. It doesn’t work, no “unlock” pops up or anything. You can hold them as long as you like and...nothing.
I have since figured something might be wrong with it as I am almost positive I’m doing it correctly. Now I have tried getting the reset button to work in hopes of the up and down buttons being unlocked upon reset. I hold the reset button for 5 seconds and I’ve tried the method of the combo with the fire button and reset as well as the up arrow and reset and the screen goes blank and turns back on but never says reset and the settings are still the same as before.
My next idea is plugging it into my computer in hopes of an update fixing this but other than that I am out of ideas. The device is stuck on 20 watts which is too high for the cartridge I’ve got on it. Does anybody have any ideas, please help me out.
Hey all,
I've been using the Intellicharger I2 for a while, and recently I've noticed it's taking a long time to charge batteries. Keep in mind I realize that the Amp output is distributed across two batteries, etc, but I feel as though its time for an upgrade.
I regularly use Samsung25R's and occasionally VTC5's, (18650) and I was wondering what your opinions are on the best charger I can buy. The criteria I'm looking for ideally a
External transformer
Fast charging time
LCD screen
Ample venting
Autostop cuttoff when batteries finished
Thank you in advance!
I bought this aspire model about 4-5 weeks ago but only today did it stop working. When I plug it in, there is no problem and it shows on the screen that it is charged to 99% but as soon as I try to turn it on a take a hit, it doesnt turn on. Anyone have this model and know what to do?
I was vaping on my subtank mini on top of a cana clone and it was working fine until the screen started glitching. It would only show like half the screen or the screen would be all jumbled up and it wouldn't fix until I turned it on and off a couple times. I took out the battery and let it sit overnight and when I popped in a new battery today the screen isn't lighting up at all, also its firing a lot weaker, and randomly locking itself. What can I do?
So I know this is feeling more and more like a taboo topic. I have an istick50w, and a subtank mini.
Today at work I do my morning ritual, of connecting the tank, taking a few puffs, and turning it off while in my office.
I just took my lunch break and head into the break room, turning it back on and for whatever reason, my device jumped from 15w, to 50!!!
I know for a fact I turned it off. I always watch the screen go off. There's no way it could turn on in my desk, or anything like that. There's no way I could turn up the watts because it's constantly locked.
I have no idea what happened but I am incredibly mad.
Now my coil is tasting burnt. I've been using it for a day or two, so it was properly primed. But I'm sure going from 15 to 50 just killed it.
It was one of my last coils too.
i have a new Itaste VV4 15 watt 1000mah
I don't seem to get as much time out of my battery as i expected- does anyone know about how long it should last?
I'm going to test it out to see exactly how much time i get out of a full charge but as of right now i just feel like it's not lasting as long as it should.
Also when I use it plugged up on a charging cord the battery still runs out till it eventually has no charge and turns off and cant be used till it adds up some charge on it- I thought since it was a pass through device i would still be able to continue to use it while being plugged up on the charger, so im not sure if I should actually be able to with this device and mine is not working correctly or thats just how this unit does work.
I've got a couple of these little mods and both have the same problem. They continue to fire after the button is released. When it happens the display changes to the power on/off and keeps firing until the unit restarts (presumably after the 15 second cut off?). I can only think that the mod is registering 3 presses when I fire which triggers the screen change, and there is a bug which stops the release of the fire button registering. Anyone experienced this? Any fix? I'm surprised it's happening with two units so it must be happening to someone else!
I'm very curious about what certain terms and numbers mean and how they came to be.
Here's a few that come to mind:
RY4
18650 battery (18 x 65mm?)
510 thread
510 (and 810) drip tip (both the number and the term)
Atomizer (it's not like it actually reduces liquids to atoms)
Delrin
ceramic coil (the heating element, wick or both)
Squonk
OLED screen
Tootle puffer
Steeping (like making tea?)
Velocity deck
Fused clapton, alien, ect.
Resistance wire (what makes it different than other wire?)
PEEK insulator
Terpenes
Coil break-in (not how to, but what does it actually do)
Feel free to answer and/or ask more questions.
Hi, I'm new here and have searched but couldn't find an answer so help appreciated. When charging my MVP4 no matter what the state of charge when I put it on charge the button shows RED. It stays RED and as the charge builds turns GREEN and then goes out when full. I.e. It never goes through AMBER which all my previous batteries have. Is this normal?